Agricultural machinery

Quick assembly

Mechanically adjustable fork with 1200 mm long support tubes. The support tubes can be folded up for road transport.With EURO and three-point linkage for front and rear operation, opening width 900-1100 mm adjustable in 50 mm steps, bale size 900-1500 mm, material fine-grained steel QSTE380, weight 90 kg, max. load 1000 kg.Version with support tubes

Width 1500 mm, frame height 900 mm, frame profile tube 80x80 mm, weight 110 kg.

High-quality spring steel skewers, 1100 mm long, thick-walled skewer support tube with welded-in conical sleeves, distance between the tines 680mm, frame size 1080x500 mm, load capacity 1000 kg, weight approx. 58 kg.Without accessories for the three-point attachment.

The latest generation of bale tongs is even more stable and robust. For use with foil bales, all components in contact with the bale are rounded and prevent any damage in advance. The gripping arms are also rounded at the front and back and are mounted at the pivot points with induction-hardened, internally lubricated bolts. The wall thickness of the pipes was also increased. These are now manufactured continuously from the cylinder to the end of the gripper arms. This measure made it possible to increase the stability of the gripper arms. All grease nipples are quickly accessible.Includes 1.5 m hydraulic hoses with connector. For round bales with a diameter of 0.9 m to 1.5 m, maximum bale weight 1000 kg, gripper arm compensation - no offset of the bales when picking up, even pressure on both sides, favorable center of gravity close to the tractor/tractor, weight 180 kg.

The latest generation of bale tongs is even more stable and robust. For use with foil bales, all components in contact with the bale are rounded and prevent any damage in advance. The gripping arms are also rounded at the front and back and are mounted at the pivot points with induction-hardened, internally lubricated bolts. The wall thickness of the pipes was also increased. These are now manufactured continuously from the cylinder to the end of the gripper arms. This measure made it possible to increase the stability of the gripper arms. All grease nipples are quickly accessible.Includes 1.5 m hydraulic hoses with connector. For round bales with a diameter of 0.9 m to 1.5 m, maximum bale weight 1000 kg, gripper arm compensation - no offset of the bales when picking up, even pressure on both sides, favorable center of gravity close to the tractor/tractor, weight 180 kg Prepared for screwing or welding on mounting brackets for various makes.

External thread M10 x 1.5cone 12.7 - 14.5 millimeters

M14 x 1.5Cone 16.2 - 18.2 mm

Radschraube metrisch M12x1,5, Kugelbund

Trailer load 3500 kg, tongue load 120 kg, D value 18.5

Trailer load 3500 kg, tongue load 120 kg, D value 24.8

Suitable for 3 lower link balls Cat. 2/Cat. 3

Internal thread: M22x1.5

Screw-in thread: M20x1R

Suitable for SteyrThread: M12x1.75 IT

Internal thread M18 x 1.5 RCone 19.9 - 22.3 mm

Outer diameter 20.00 mmCone 16.2 - 18.2 mm

Fits Case and Steyr

Cone 19.9 - 22.3 mmFor the Steyr 80 series with ZF axle APL 325

Length: 250mmCone: 19.9-22.3mmInternal thread: M18x1.5L

Cone 16.2 - 18.2 mm