Agricultural machinery spare parts

Mechanically adjustable fork with 1200 mm long support tubes. The support tubes can be folded up for road transport.With EURO and three-point linkage for front and rear operation, opening width 900-1100 mm adjustable in 50 mm steps, bale size 900-1500 mm, material fine-grained steel QSTE380, weight 90 kg, max. load 1000 kg.Version with support tubes

Width 1500 mm, frame height 900 mm, frame profile tube 80x80 mm, weight 110 kg.

High-quality spring steel skewers, 1100 mm long, thick-walled skewer support tube with welded-in conical sleeves, distance between the tines 680mm, frame size 1080x500 mm, load capacity 1000 kg, weight approx. 58 kg.Without accessories for the three-point attachment.

The latest generation of bale tongs is even more stable and robust. For use with foil bales, all components in contact with the bale are rounded and prevent any damage in advance. The gripping arms are also rounded at the front and back and are mounted at the pivot points with induction-hardened, internally lubricated bolts. The wall thickness of the pipes was also increased. These are now manufactured continuously from the cylinder to the end of the gripper arms. This measure made it possible to increase the stability of the gripper arms. All grease nipples are quickly accessible.Includes 1.5 m hydraulic hoses with connector. For round bales with a diameter of 0.9 m to 1.5 m, maximum bale weight 1000 kg, gripper arm compensation - no offset of the bales when picking up, even pressure on both sides, favorable center of gravity close to the tractor/tractor, weight 180 kg.

The latest generation of bale tongs is even more stable and robust. For use with foil bales, all components in contact with the bale are rounded and prevent any damage in advance. The gripping arms are also rounded at the front and back and are mounted at the pivot points with induction-hardened, internally lubricated bolts. The wall thickness of the pipes was also increased. These are now manufactured continuously from the cylinder to the end of the gripper arms. This measure made it possible to increase the stability of the gripper arms. All grease nipples are quickly accessible.Includes 1.5 m hydraulic hoses with connector. For round bales with a diameter of 0.9 m to 1.5 m, maximum bale weight 1000 kg, gripper arm compensation - no offset of the bales when picking up, even pressure on both sides, favorable center of gravity close to the tractor/tractor, weight 180 kg Prepared for screwing or welding on mounting brackets for various makes.

Thread M14x1.5, pin 19 mm.

Thread M14x1.5, pin 19 mm.

Suitable for type 116, 316

Suitable for type 116, 316

Suitable for ESM universal beams type 30 - 16.

Bar blade with a smooth counter edge suitable for ESM leaf trimmers and Schanzlin vine trimmers. The blade has a length of 110 mm, a width of 70 mm and the hole spacing of the rivet holes is 51 mm. The blade is fastened to the back of the bar with 6x20 mm countersunk rivets.

Underlay for the knife holder to compensate for the height of the beam attachment. This is screwed into the two outer knife holders.

4-hole mower blade, serrated version, suitable for BCS cutter bars and Reform motor mowers. The rivet holes are countersunk at the bottom with diameter 5,5 mm. The two central holes have a diameter of 10 mm.

Double finger middle cut suitable for Aebi, BCS and Reform

Blade holder for BCS finger mower Europe series 600 and 700. Suitable for Aebi, BCS and Reform.

without rotating interchangeable tip

without rotating interchangeable tip

without rotating interchangeable tip

without rotating interchangeable tip

Beaked share SSP-350 W suitable for Rabe plow bodies BP-330WS, BP-350 W and BP-350 WS. Hole spacing twice 120mm, spine length 470mm. Suitable plow screws with a square attachment for attaching the shares are Faie No. 1863.

Beaked share SSP-350 W suitable for Rabe plow bodies BP-330WS, BP-350 W and BP-350 WS. Hole spacing twice 120mm, spine length 470mm. Suitable plow screws with a square attachment for attaching the shares are Faie No. 1863.

without rotating interchangeable tip