Agricultural machinery spare parts

New series from 1989 with 4 hole mounting.

New series from 1989 with 4 hole mounting.

The bearing housing N78 has an outside diameter of 77mm. The inner diameter is 62mm so that the deep groove ball bearing 6206 (Faie No. 16741) can be mounted.

For converting from ball to plain bearings. The bearing ring is pushed onto the profile shaft and welded to the fork.

Bearing shaft with right-hand thread M56x2mm for the horizontal swing mower drive from Busatis and ESM. Suitable for double knife mowers with mechanical or hydraulic drive.

Belt rake tine suitable for Reform single-axle machines and Metrac built up to 01.2004

Belt rake tine suitable for Reform single-axle machines and Metrac built up to 01.2004

Belt rake tine suitable for Reform Metrac and motor chain turning.

Original ESM Carbodux blade, serrated version

With FEM 2 / ISO 2 mount for pallet fork carrier frame. With 2 carrier arms, a load of up to 1500 kg and a big bag size of up to 1000x1000 mm can be accommodated.Outreach: 900 mmWeight: 35 kgReception on pallet fork carrier: FEM 2 / ISO 2 Height fork carrier: 407 mm

Load capacity 1500 kg when using all 4 hooks, for big bags 900x900 mm and 1000x1000 mm, color anthracite gray, dimensions (LxWxH): 1275x1050x860 mm, weight: 90 kg

Triangular profile, fork attachment 1 3/8x6 with sliding pin, length = total length

Triangular profile, fork 1 3/8x6 with sliding pin, freewheel mounted on the device sideDirection of rotation right - use for e.g. Rear PTO shaft (PTO shaft stub running clockwise) Direction of rotation left - use for e.g. Front PTO shaft (PTO shaft stub left-hand running)

Triangular profile, slip-on fork 1 3/8x6 with sliding pin, freewheel mounted on the device side, e.g. for front PTO shaft

Triangular profile, attachment fork 1 3/8x6 with sliding pin

Upper knife, 27 blades, 6 of which are mushroom blades

Upper knife, 22 blades, including 5 mushroom blades

Bottom knife, 22 blades, including 4 mushroom blades

​Weld-on cup including sealing ring.4 inch = DN100, cup width B = 130 mm5 inch = DN120, cup width B = 150 mm6 inch = DN150, cup width B = 180 mm8 inch = DN200, cup width B = 200 mm

Black steel weld-on male without clamping ring. Suitable for the Italian system according to the listed nominal diameters.4 inch = DN100, ball outside diameter D = 130mm5 inch = DN120, ball outside diameter D = 150mm6 inch = DN150, ball outside diameter D = 180mm8 inch = DN200, ball outside diameter D = 243mm

80x50x3 mm, recessed at the bottom