Agricultural machinery spare parts

Sweeping brushes & accessories

Scraper floor parts & front loader tines

Soil cultivation

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#7498

Schröckenfux Blade DIN 80 2 holes Blade DIN 80 2 holes

Version: glatt

80x76x2mm

From €1.01*

to the product

#FA12168

Schröckenfux Blade DIN 80 3 holes, countersunk at the top Blade DIN 80 3 holes, countersunk at the top

Side hole right 11 mm

€1.75*

#FA52960

Schröckenfux Blade DIN 80 3 holes, ML 10 mm Blade DIN 80 3 holes, ML 10 mm

€1.54*

#23318

Schröckenfux Blade DIN 80 333a Blade DIN 80 333a

Version: gezahnt

3 hole, ML 9 mm

€1.49*

#FA40344

Schröckenfux Blade DIN 80 333b Blade DIN 80 333b

hole, ML 5.5mm

€1.49*

Klinge DIN 80 4 Loch, Mittelloch 11 mm, oben versenkt

#FA52958

Schröckenfux Blade DIN 80 4 holes, center hole 11 mm, countersunk at the top Blade DIN 80 4 holes, center hole 11 mm, countersunk at the top

€1.79*

#FA41915

Schröckenfux Blade DIN 80 4 holes, ML 10 mm Blade DIN 80 4 holes, ML 10 mm

€1.49*

#FA41917

Schröckenfux Blade DIN 80 5 holes Blade DIN 80 5 holes

€1.59*

#FA52962

Schröckenfux Blade DIN 80 5 holes, countersunk at the top Blade DIN 80 5 holes, countersunk at the top

From €1.53*

to the product

Mähmesserklinge DIN 80 gezahnt, 2-Loch, Stärke 2,5mm

#FA7500

Schröckenfux Blade DIN 80 serrated, 2-holes, thickness 2,5mm Blade DIN 80 serrated, 2-holes, thickness 2,5mm

80x76x2.5mm

€1.59*

#FA16049

Schröckenfux Blade DIN 80, with recess Blade DIN 80, with recess

€1.29*

#FA4736

ESM Blade for bidux double knife mower Blade for bidux double knife mower

Original mower blade suitable for Busatis and ESM bidux double blade mowers.Made in Germany.Original ESM Carbodux blade.

From €3.49*

to the product

#FA7756

ESM Blade for Busati's double knife mower Blade for Busati's double knife mower

Original ESM blade suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260.Made in Germany.

From €2.84*

to the product

#7759

Schröckenfux Blade GB543 2 hole Blade GB543 2 hole

Version: gezahnt

€4.75*

Messerführungsplatte rechts ESM 332.1320 passend zu Doppelmessermähwerke

#FA53052

ESM Blade guide plate right ESM 332.1320 suitable for double blade mowers Blade guide plate right ESM 332.1320 suitable for double blade mowers

Blade guide plate on the right suitable for Busatis and Busatis bidux double blade mowers for guiding the upper and lower blades in the area of the outer shoe

€11.70*

Messerhalter zum Schrauben für Balkenrückenstärke 15 mm, anstelle ESM 272.0470

#FA49506

ESM Blade holder for screwing for bar back thickness 15 mm, instead of ESM 272.0470 Blade holder for screwing for bar back thickness 15 mm, instead of ESM 272.0470

Blade holder for lower knife guide arm for screwing. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM 1124, BM 1260. The through holes on the back of the bar should have a diameter of at least 10.1mm. If the knife holders to be replaced are riveted, then the hole diameter on the back of the beam is usually 9.20 to 9.50 mm.Please check the diameter of the holes on the back of the beam before ordering the version withscrews!

€61.90*

Klingenhalter passend zu BCS, VOGEL und NOOT

#FA47365

Blade holder suitable for BCS, VOGEL and NOOT Blade holder suitable for BCS, VOGEL and NOOT

For 4mm blades, without screw

€3.99*

#FA6537

Blade holder suitable for CLAAS Blade holder suitable for CLAAS

Blade holder suitable for Claas

€17.90*

Klingenhalter passend zu CLAAS, Krone, Pöttinger, PZ-Zweegers

#FA28002

Blade holder suitable for CLAAS, Krone, P�ttinger, PZ-Zweegers Blade holder suitable for CLAAS, Krone, P�ttinger, PZ-Zweegers

Blade holder suitable for Claas, Krone, Pttinger, PZ-Zweegers

From €14.85*

to the product

Klingenhalter passend zu Deutz-Fahr, Fort, Kuhn, Pöttinger

#FA2366

Blade holder suitable for Deutz-Fahr, Fort, Kuhn, P�ttinger Blade holder suitable for Deutz-Fahr, Fort, Kuhn, P�ttinger

Suitable for drum mowers for Deutz-Fahr, Fort, Kuhn, Pttinger

€15.99*

#FA32175

Blade holder suitable for FELLA Blade holder suitable for FELLA

Knife holder for Fella drum mower KM, length 185mm

€19.79*

Klingenhalter passend zu Fella, Niemeyer

#FA1971

Blade holder suitable for Fella, Niemeyer Blade holder suitable for Fella, Niemeyer

Blade holder suitable for Fella &~ Niemeyer, length 174mm

€20.50*

#FA43933

Blade holder suitable for M�RTL Blade holder suitable for M�RTL

Suitable for Mrtl disc mowers

€27.99*

#FA34315

Blade holder suitable for M�RTL Blade holder suitable for M�RTL

for driving mower drum inside

€32.50*

Seite 5 von 63

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery spare parts

Drive shafts & spare parts

Mower spare parts

Teejet precision farming

Combine harvester parts

Sweeping brushes & accessories

Liquid manure

Hay tines & spare parts

Field sprayer parts

Attachments and accessories

Scraper floor parts & front loader tines

Soil cultivation

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.