Agricultural machinery spare parts

Sweeping brushes & accessories

Scraper floor parts & front loader tines

Soil cultivation

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

21294

Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,295.00*

-24 %

Kurbellagergehäuse hinten komplett, 281.0090

FA117928

Complete rear crank bearing housing, 281.0090

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

€179.00* €235.00* (23.83% saved)

2549

Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

FA54554

Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-26 %

FA107995

Cutter head screw M8x1x20

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

€1.69* €2.29* (26.2% saved)

-40 %

FA63556

Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

FA2521

Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

FA2531

Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

72983

Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

47888

Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

All Products

Klinge 7014A 3-Loch, mit gezahnter Schneide

FA46996

Schröckenfux Blade 7014A 3-hole, with serrated edge

€1.89*

FA48818

Blade BCS D2001R/80

A=51, B=31, C=81mm Distance between center of rivet holes and back of blade 16mm

€1.69*

FA104118

Schröckenfux Blade BCS, reform 563.50696.3

A=51, B=31, C=76, 7.0mmsunk at the bottom

From €1.16*

to the product

Klinge bidux gezahnt mit Pilz, anstatt ESM 344.0991

FA101992

ESM Blade bidux serrated with knob, instead of ESM 344.0991

Original ESM Carbodux blade with knob, serrated design

€11.59*

Klingenbolzen passend zu BCS, VOGEL und NOOT

FA27101

Blade bolt suitable for BCS, VOGEL and NOOT

with screw for 3 mm blades

€3.99*

Klingenbolzen passend zu BCS, Vogel & Noot, zu 4mm Klingen

FA104097

Blade bolt suitable for BCS, Vogel and Noot, to 4mm blades

Blade bolt suitable for BCS and Vogel &~ Noot for mowers with 4mm blades.

€4.59*

Klingenbolzen passend zu COMER, GASPARDO, MARANGON, OLIVI, OTMA

FA45069

Blade bolt suitable for COMER, GASPARDO, MARANGON, OLIVI, OTMA

Blade bolt complete with screw and nut

€3.79*

Klingenbolzen passend zu DEUTZ-FAHR, GREENLAND, VICON

FA64825

Blade bolt suitable for DEUTZ-FAHR, GREENLAND, VICON

Blade bolt complete with screw and nut

€3.49*

FA47616

Blade bolt suitable for FELLA

Blade bolt complete with screw and nut

€3.49*

FA7910

Blade bolt suitable for FELLA

consisting of: 477,262 (123,471) + 477,274 (116,953)

€4.49*

Klingenbolzen passend zu FELLA, JOHN DEERE, NEW HOLLAND, VICON

FA53174

Blade bolt suitable for FELLA, JOHN DEERE, NEW HOLLAND, VICON

Blade bolt complete with screw and nut

€2.25*

Klingenbolzen passend zu KRONE, PÖTTINGER

FA1970

Blade bolt suitable for KRONE, P�TTINGER

consisting of 143.229 + 909.602.1 + 119.006complete with nut

From €3.70*

to the product

FA6550

Blade bolt suitable for KUHN

complete with mother

€2.49*

Klingenbolzen passend zu KUHN Scheibenmäher

FA4046

Blade bolt suitable for KUHN disc mowers

complete with self-locking nut

From €1.97*

to the product

FA116719

Blade bolt suitable for KUHN, disc mowers

Blade bolt for disc mower complete with nut (with movable disc)

From €2.51*

to the product

Klingenbolzen passend zu KUHN, KVERNELAND, TAARUP

FA6554

Blade bolt suitable for KUHN, KVERNELAND, TAARUP

complete with mother

€3.49*

Klingenbolzen passend zu KUHN, PÖTTINGER Garnier

FA53171

Blade bolt suitable for KUHN, P�TTINGER Garnier

complete with mother

€2.79*

FA53172

Blade bolt suitable for NIEMEYER

Blade bolt complete with screw and nut

€3.19*

FA51905

Blade bolt suitable for P�TTINGER

Delivery without mother! ~

From €2.24*

to the product

Klingenbolzen mit Schraube passend zu BCS, Vogel & Noot

FA27100

Blade bolt with screw suitable for BCS, Vogel Noot

Blade bolt complete with screw and nut

€3.99*

41913

Schröckenfux Blade DIN 75 2 holes

Version: gezahnt can be used instead of Aebi: AM8670/1, AM8670-1, AM8670.01, 100.6158, DIN75

75x76x2mm

From €1.04*

to the product

FA23321

Schröckenfux Blade DIN 75 3 holes

ML 5.5mm

€1.49*

FA51241

Schröckenfux Blade DIN 75 3 holes

ML 9mm

€1.49*

FA12208

Schröckenfux Blade DIN 75 recessed at the bottom

The rivet holes have a countersink on the underside.

€1.49*

Page 4 of 63

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.