--------------------------
Now NEW - BRIXIES Plus Agricultural Building Blocks
Go to homepage
Siegel österreichischer Onlineshop Siegel 'Ausgezeichnet Einkaufen - Top Betrieb
€0.00*

Bale transport equipment

Accessories & spare parts

Ball skewers

Bale grabs

Bale forks

Filter
Bale fork adjustable with support tubes
#FA77966
Schneider Bale fork adjustable with support tubes
Sale and shipment by: FAIE Handels GmbH
Mechanically adjustable fork with 1200 mm long support tubes. The support tubes can be folded up for road transport.With EURO and three-point linkage for front and rear operation, opening width 900-1100 mm adjustable in 50 mm steps, bale size 900-1500 mm, material fine-grained steel QSTE380, weight 90 kg, max. load 1000 kg.Version with support tubes

€699.00*
Bale fork for EURO pickup with 4 tines 1100 mm
#FA70242
Schneider Bale fork for EURO pickup with 4 tines 1100 mm
Sale and shipment by: FAIE Handels GmbH
Width 1500 mm, frame height 900 mm, frame profile tube 80x80 mm, weight 110 kg.

€669.00*
Bale fork with Euro and three-point attachment, 2 tines
#FA20835
Schneider Bale fork with Euro and three-point attachment, 2 tines
Sale and shipment by: FAIE Handels GmbH
High-quality spring steel skewers, 1100 mm long, thick-walled skewer support tube with welded-in conical sleeves, distance between the tines 680mm, frame size 1080x500 mm, load capacity 1000 kg, weight approx. 58 kg.Without accessories for the three-point attachment.

€369.00*
Bale tongs with EURO holder
#FA17748
Schneider Bale tongs with EURO holder
Sale and shipment by: FAIE Handels GmbH
The latest generation of bale tongs is even more stable and robust. For use with foil bales, all components in contact with the bale are rounded and prevent any damage in advance. The gripping arms are also rounded at the front and back and are mounted at the pivot points with induction-hardened, internally lubricated bolts. The wall thickness of the pipes was also increased. These are now manufactured continuously from the cylinder to the end of the gripper arms. This measure made it possible to increase the stability of the gripper arms. All grease nipples are quickly accessible.Includes 1.5 m hydraulic hoses with connector. For round bales with a diameter of 0.9 m to 1.5 m, maximum bale weight 1000 kg, gripper arm compensation - no offset of the bales when picking up, even pressure on both sides, favorable center of gravity close to the tractor/tractor, weight 180 kg.

€1,479.00*
Bale tongs without holder
#FA20834
Schneider Bale tongs without holder
Sale and shipment by: FAIE Handels GmbH
The latest generation of bale tongs is even more stable and robust. For use with foil bales, all components in contact with the bale are rounded and prevent any damage in advance. The gripping arms are also rounded at the front and back and are mounted at the pivot points with induction-hardened, internally lubricated bolts. The wall thickness of the pipes was also increased. These are now manufactured continuously from the cylinder to the end of the gripper arms. This measure made it possible to increase the stability of the gripper arms. All grease nipples are quickly accessible.Includes 1.5 m hydraulic hoses with connector. For round bales with a diameter of 0.9 m to 1.5 m, maximum bale weight 1000 kg, gripper arm compensation - no offset of the bales when picking up, even pressure on both sides, favorable center of gravity close to the tractor/tractor, weight 180 kg Prepared for screwing or welding on mounting brackets for various makes.

€1,479.00*
Conversion to three-point hitch
#FA28479
Conversion to three-point hitch
Sale and shipment by: FAIE Handels GmbH
with the matching attachment kit for Cat.

€17.90*
Hydraulically folding bale fork with three-point and EURO mounting
#FA127032
Schneider Hydraulically folding bale fork with three-point and EURO mounting
Sale and shipment by: FAIE Handels GmbH
The hydraulically folding bale fork with 2 tines is equipped with a three-point and EURO mounting. The thick-walled zinc support tube with welded-in cone sleeves can be folded upwards hydraulically. This means that no fork protection is required for road transport. The high-quality square spring steel tines with a length of 1100 mm have an M22x1.5 mm thread and can bear loads of up to 1000 kg. The distance between the conical sleeves for the tines in the support tube is 660 mm.The spring steel tines, the hydraulic lines and the BG3 coupling plugs are included in the scope of delivery.

€798.00*
Round bale fork hydraulically adjustable with Euro standard and three-point attachment
#FA101871
Schneider Round bale fork hydraulically adjustable with Euro standard and three-point attachment
Sale and shipment by: FAIE Handels GmbH
The round bale fork can be adjusted hydraulically to different bale sizes.Gentle treatment of the silage bales thanks to rotating steel tubes attached to the heavy-duty tine 1200mm. After removing the steel pipes, the heavy-duty tines can be used to pick up bales. Attachment to the front loader via Euro mount or attachment to the three-point possibleLoad load max. 1000kgOpening width 550-1700 mmScope of delivery: support frame including hydraulic cylinder and hoses with coupling, heavy-duty tine 1200mm with attached, rotating steel tubes, weight 140 kg.

€1,398.00*

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.