Matching vogel & noot
630605E, 1 piece per knife
Cutter head complete with wear plates for sliding block size 38x38mm and with centre bolt for centring the cutter head. The cutter head can be fastened with 4 screws. The hole spacing of the screws is 101.6mm and 152.4mm. The holes are designed for M8 screws.
Lower cutter head suitable for Vogel & Not Jet mowers with bidux double-blade mower deck. The cutter head is screwed onto the mower blade. Supplied complete with the fitting screws.
Mower blade suitable for Autro-Rapid, Moty, Rapid and Vogel & Noot motorised mowers, as well as for ESM bars. The holes for the fastening rivets are countersunk on the underside.
Top cutter head suitable for Vogel & Not Jet mowers with bidux double-blade mower deck. The cutter head is screwed onto the mower blade. Supplied complete with the fitting screws.
Wear plate for ESM cutterhead for mower blade drive via a sliding block with an edge length of 38x38mm. The plate is attached to the inside of the cutterhead with 2 pcs. M6 screws on the inside of the cutterhead. When replacing, both wear plates should always be replaced at the same time. Delivery per piece!
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.