Suitable for Reform
Suitable for type RM58, 158, 110, 111, 111S, 112, 131.
Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.
Adjusting screw with thread M16x1.5 for cutter head with serrated holder for Aebi, BCS and Reform.
Underlay for the knife holder to compensate for the height of the beam attachment. This is screwed into the two outer knife holders.
Double finger middle cut suitable for Aebi, BCS and Reform
Blade holder for BCS finger mower Europe series 600 and 700. Suitable for Aebi, BCS and Reform.
Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.
Suitable for type RM58, 158, 110, 111, 111S, 112, 131.
Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.
Compression spring suitable for the fastening screws of the swath plate. Length 36mm, outer diameter 20mm, spring thickness 4mm
Cone nut with thread M16x1.5 for measuring head with serrated holder for Aebi, BCS and Reform.
Conical screw M8x1x19 with wrench size 14mm. Suitable for Aebi, BCS and Reform.
Tapered screw M8x1x21 with wrench size 13mm. Suitable for Aebi, BCS and Reform.
Cutter head complete with cutter head cover for driving pin wrench size 20mm.
Cutter head complete with fastening screws. Suitable for Aebi BM5 and BM8 with Italian bar, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European bar.We would like to point out that Aebi and Reform have different cutter bars for this cutter head . This means that the length of the fastening screws is not sufficient. You can order a longer taper screw and knife head screw as an accessory (see also below) under the following FAIE numbers: ~ ~Taper screw M8x1x21mm, FAIE number 107996Knife head screw M8x1x20mm, FAIE -Number 107995
Cutter head cover with drive pin wrench width 20mm and total height 34.5mm - old version.
Cutter head cover with drive pin spanner width 19,5mm instead of 20mm and total height 43,5mm. This cutterhead cover can be used for advanced drift pin wear.
Cutter head cover with driving pin wrench width 20mm and total height 43,5mm.
Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.