Couplings, ball valves,

With 2 hydraulic connections, flow max. 70l/min., max. pressure 250 bar, hydraulic connection G1/2"~ Female thread, can be coupled under pressure.

When machinery and equipment are parked, the hydraulic lines are often under residual pressure, or pressure may have built up due to heating caused by, for example, sunlight. Connecting to the tractor’s hydraulic system is then difficult or completely impossible. In such cases, the hydraulic connector is struck against a solid object to open the valve and release the pressure. This causes the hydraulic oil to spray in all directions and also leads to hydraulic oil seeping into the ground. Over time, the coupling nipple at the front of the connector is also damaged.The oil pressure relief pliers allow the excess pressure in the hydraulic line at the connector to be released in a controlled, safe and environmentally friendly manner. No more splattered work areas or oily clothing!

BG 3. Serves to accommodate the uncoupled plug. Mounting thread M18x1.5mm.

Male to fixed part with G1/2" internal thread

6-pin for electrical cable entry on the tractor side.

Sleeve, external thread,push-pull design

Plug, external thread,push-pull design.

Sleeve, external thread,push-pull design.

Plug, external thread,push-pull design.

Sleeve, external thread, light series with bulkhead thread,push-pull design.

Plug, external thread, lightweight series with bulkhead thread, push-pull design.

Plug, internal thread.Push-Pull design.

Sleeve, internal thread.Push-Pull design.

Plug

sleeve

sleeve

Plug

According to ISO 7241-1A, push-pull versionsleeve

According to ISO 7241-1A, push-pull versionplug

Quick-release coupling female in a push-pull design with an internal thread in accordance with DIN 3852. The female is sealed by a cone-seat valve with a strong spring to minimise oil leakage during coupling.

Quick-release coupling male with female thread to DIN 3852. The male is sealed by a cone-seat valve with a strong spring to minimise oil leakage during coupling.

Plug, external thread, lightweight series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

according to ISO standard series "~A"~ with IG series PAV1 sleeveNew: with dust protection

Sleeve, external thread, light series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!