Accessories for oil coolers
Connection cable with plug, 2-pin
Cross section 2.5 mm, length 3.2 m
Content: 3.2 m (€7.97 / 1 m)
Connection set for asa TT standard cooler with asa rail system
Consisting of 2 pieces of connection parts with internal thread and 1 piece of blind cap.2 pieces of straight connections
Connection set for asa TT standard cooler with asa rail system
Consisting of 2 pieces of connection parts with internal thread and 1 piece of blind cap.1 piece straight and 1 piece 90 connection
Connection set for asa TT standard cooler with asa rail system
Consisting of 2 connecting parts with internal thread and 1 blind cap.2 pieces 90
Fan control for oil cooler
Soft start and temperature-dependent speed control of the fan. The maximum starting current is approx. 10% above the rated fan current. The fan speed is varied depending on the oil temperature using a temperature sensor (accessory). Overload and reverse polarity protection on voltage input. Time-delayed fan activation for self-protection. Control range with temperature sensor 45-55C, switching point with temperature switch 50C. Includes adapter cable for temperature switch (61128, 77617) or sensor (61127, 77616) with plug.
Temperature sensor
Protection class IP67, thread G1/2", oil temperature range -20 to +100C. It is not possible to use the temperature sensor without fan control.
Temperature sensor IP69K
44 - 55C, G 1/2"~ without cable.
Temperature switch
Switching temperature 50C, +/-5C, thread G1/2"
Temperature switch IP69K
Switching temperature 50C, +/- 5C, thread G 1/2"~ without cable.
Vibration damper
Especially for oil coolers, spring material natural rubber.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
