Browse through our special offers and discover lots of great items at attractive prices!
Go to homepage
Siegel österreichischer Onlineshop Siegel 'Ausgezeichnet Einkaufen - Top Betrieb
€0.00Test

Technical articles

Plug-in

Roller chains

Gas springs

Sliding bearing

Storage

Various technical articles

Filter products

-20 %
#24228
Rübig Quick coupler connector Quick coupler connector
Cat.: 1 Ø bolt (mm): 8

Shaft made of drop-forged steel, galvanized, yellow chromated, for catch can

Variants from €2.08*
€3.99* €4.99* (20.04% saved)
#52073
Roller chain ASA Simplex Roller chain ASA Simplex
Type: ASA 60-1

DIN 8188, roll of 5 m.

€79.60* €99.50* (20% saved)
#52011
Roller chain ISO 606 Simplex Roller chain ISO 606 Simplex
A (mm): 19,05 A x C (inch): 3/4 x 7/16 B (mm): 12,07 C (mm): 11,68 D (mm): 22,70 E (mm): 18 Type: 12B-1

DIN 8187, roll of 5 m

Variants from €39.84*
€63.92* €79.90* (20% saved)
-20 %
#132645
Rübig Safety linchpin Rübig, with safety catch Safety linchpin Rübig, with safety catch
B1 (mm): 14 B2 (mm): 49 D1 (mm): 10,5 D2 (mm): 32 L1 (mm): 45 L2 (mm): 66 Length (mm): 45 Ø (mm): .10,5

Conforms to DIN11023This linchpin cannot be bent or sheared when used correctly. By attaching the chain to the third hole, it can no longer pull up the spring clip. Drop-forged, hardened and galvanized, tested many times!

Variants from €3.84*
€3.92* €4.90* (20% saved)
-20 %
#101160
Screw handle external thread Screw handle external thread
D (mm): 50 L (mm): 25 Thread: M 8

Variants from €2.68*
€3.16* €3.95* (20% saved)
-20 %
#101164
Screw handle internal thread Screw handle internal thread
D (mm): 50 E (mm): 12 Thread: M 8

Variants from €2.39*
€3.36* €4.20* (20% saved)
#51798
Shaft seal ASL with dust lip Shaft seal ASL with dust lip
A (mm): 72 I (mm): 35 Thickness (mm): 10

WellendichtringASLmit Staublippe, NBR 70 Shore, DIN3760BauformASL: Aussenmantel gummiertmit Staublippe Temperaturbeständig von -40 °C bis max. +100 °C Druckbereich bis max. 0,5 bar Umfangsgeschwindigkeit(m/s): ≤ 12Versteifungsring: unlegierter Stahl nach DIN EN 10139Zugfeder: unlegierter Federstahl nach DIN EN 10270-1Radial-Wellendichtring WDR in der ASL-Ausführungin Anlehnung an dieDIN3760 mit einem elastomeren Außenmantel und einem metallischen Versteifungsringsowie einer federunterstützten Dichtlippe und zusätzlich mit einer Staublippeausgestattet. Radial-Wellendichtringe sind im allgemeinen für dendrucklosen Betrieb ausgelegt. Werden zur Abdichtung von rotierenden Maschinenelementen, wie z. B. Wellen, Naben, Achsen,... verwendet

€8.49*
-20 %
#107958
AL-KO Spacer/extension M8 Spacer/extension M8
A (mm): 34

Variants from €4.28*
€4.28* €5.35* (20% saved)
-20 %
#55223
Spring cotter pin Spring cotter pin
Piece: 10 Ø: 2

Simply bent, galvanized, in a practical economy pack.

Variants from €1.56*
€1.56* €1.95* (20% saved)
#FA24408
Steering handle Steering handle

Suitable for all tractors (tugs) with a flat steering wheel, 15. Complete with plate and screws.

€9.50*
#FA113691
Steering handle deluxe Steering handle deluxe

Unlike other wheel spinners, this product has a sealed bearing and an all-round rubber closure. It's super slim, super comfortable and doesn't dig into your steering wheel! It is very easy to install and comes with extra long mounting bolts for steering wheels with a diameter of up to 31 mm.Color: BlackGrade: 0Material: Rubber

€19.99*
#FA24409
Strong steering handle Strong steering handle

Suitable for all tractors (tractors) with a curved steering wheel, 30. Complete with plate and screws.

€9.50*
-20 %
#16373
Tension spring Tension spring
Length (mm): 90 Ø: 12,5

Quality steel

Variants from €0.48*
€0.96* €1.20* (20% saved)
#51930
Tension spring Tension spring
Thickness (mm): 2,0 Ø: 18

Length 1 m. The springs can be shortened to any length. Eyelets can be easily bent with combination pliers.

Variants from €27.25*
€27.25*
-20 %
#32462
Vibration block for heavy loads Vibration block for heavy loads
A (mm): 62 C (mm): 10 D (mm): 8 H (mm): 30 K (mm): 85 max. load (kg): 200

oil resistant, 60-70 Shore

Variants from €11.60*
€11.60* €14.50* (20% saved)
-20 %
#32465
Vibration damper with one-sided threaded bolt Vibration damper with one-sided threaded bolt
A (mm): 30 B (mm): M6 mm C (mm): 13 H (mm): 28

oil resistant, 60-70 Shore

Variants from €3.19*
€3.19* €3.99* (20.05% saved)
-20 %
#FA43485
Vibration damper with one-sided threaded bolt Vibration damper with one-sided threaded bolt

conical shape, M8 IT/AG 40x30mm, 110kg, oil-resistant, 60-70 Shore

€3.99* €4.99* (20.04% saved)
-20 %
#FA32467
Vibration damper with one-sided threaded bolt Vibration damper with one-sided threaded bolt

oil resistant, 60-70 Shore

€5.59* €6.99* (20.03% saved)
-20 %
#32452
Vibration damper with threaded bolts on both sides Vibration damper with threaded bolts on both sides
A (mm): 30 B (mm): 20 E (mm): 23 max. load (kg): 60 Ø C (Divers): M8

cylindrical shape, oil resistant, 60-70 Shore

Variants from €2.16*
€2.56* €3.20* (20% saved)
-20 %
#32461
Vibration damper with threaded bolts on both sides Vibration damper with threaded bolts on both sides
A (mm): 40 B (mm): 30 E (mm): 20 max. load (kg): 110 Ø C (Divers): M8

conical shape, oil resistant, 60-70 Shore

Variants from €2.56*
€3.80* €4.75* (20% saved)

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.