Frames & accessories

Frame with straight sides for zander according to Dr. Kindly compatible. ~Length: upper beam 477mm / lower beam 420mm ~Height: 159mm ~perforated &~ wired10 pieces

Frame with straight sides for zander according to Dr. Kindly compatible.Length: upper beam 477mm / lower beam 420mm ~Height: 220mm ~perforated &~ wired10 pieces

Frames with Hoffmann sides for Mini Plus polystyrene with the dimensions 253 x 218 x 159 mm. 6 frames are required per frame.1 pieceLime woodperforated and wired horizontally with stainless steel wireRecommendation:Simply cut a Zander flat comb (135 x 390 mm) in half to use as a center wall.

Frame with Hoffmann sides for zander according to Dr. Kindly compatible. ~Length: upper beam 477mm / lower beam 420mm ~Height: 159mm perforated &~ wired10 pieces

Frame with Hoffmann sides for zander according to Dr. Kindly compatible.Length: upper beam 477mm / lower beam 420mm ~Height: 220mm ~perforated &~ wired10 pieces

Steel nails 1.4x25mm, for attaching spacer rollers. Also suitable as a frame nail1kg packed in a box corresponds to approx. 3000 nails

Frames for the production of comb honey. For honey in its most original form with excellent taste. Made from 6 mm thick lime woodNo cutting out of the combs, therefore less honey leakageSimply slide into the frame, no extra fastening necessaryNote: Never hang 2 frames with honeycomb honey frames next to each other in the hive. Always hang alternately with removed honeycombs. This prevents wild building across the frames.

​A very practical hand-operated device. The frames can be perforated and eyeleted in a single operation.The support surface is adjustable and can therefore be adapted to the frame wood!

​Practical tool for cutting foundation sheets. Ideal for long, straight cuts.The roller cutter has a plastic handle, a stainless steel blade and finger protection.Thanks to the rotating stainless steel blade, the wax sheets can be cut to the desired frame size on a hard surface with even pressure in straight, clean cuts. The sturdy handle with finger guard enables safe handling, so that even longer cuts can be made in a controlled manner.Handle colour may vary! 

​Bent galvanized sheet steel with two holes for fastening.Height: 9 mm

​4 side spacer heads are required per frame.100 pointed head nails per packSteel, nickel-plated

The stainless steel spacer rail is suitable for 10-12 frames. It has longitudinal slots for easy attachment.

Pack of 100 plastic spacer rollers with matching pins for attaching to frames.Height: 10 mm

100 pieces of spacer rollers made of beech wood.Good stability and small contact area thanks to conical shapeWith hole ~1.5 mm for fastening with nailsHeight: 10 mm

500g tinned frame wire on a spool. Diameter: 0.55mm

Transformer solder 24 V, suitable for soldering stainless steel and iron wires into central walls.Power connection via 2m long PVC cable, temperature switch to protect against short circuits or overload.

Soldering transformer 38V for advanced beekeepers who predominantly ~stainless steel wired ~Process frames.,The higher output voltage also allows ~larger quantities ~solder quickly to middle walls.For stainless steel and iron wiresContacting via bush connector Mains connection via 2m long PVC cable Touch protection through casting in black Plastic housingTemperature switch to protect against damage caused by overload or short circuits

​Practical tool with brake function for up to 500g wire rolls. Ideal for wiring frames.Galvanized steelfor spools with an inner diameter of 20mmmax. spool length: 100mmmax. spool width: 90mmWithout wire spool!

High-quality frame wire tensioner with wooden handle.