Collegamenti e giunti idrici

An all-rounder for flexible useThe Einhell dirty water pump GC-DP 7035 LL is an all-rounder for drainage around the house and garden. Emptying ponds, pumping out flooded construction sites and cellars as well as draining rain barrels and cisterns are no problem for the all-rounder! ~The 700 watt motor provides the necessary power to pump up to 16,000 liters per hour with a delivery pressure of 0.8 bar from a maximum immersion depth of 7 meters. ~The Einhell dirty water pump GC-DP 7035 LL is an all-rounder when clear or dirty water needs to be pumped out. The 2-in-1 combination pump works with flat suction up to 1 mm residual water level, with dirty water up to 35 mm maximum foreign body size. The pump starts in clear water mode at a water height of 10 mm in continuous operation. The suction level can be adjusted with a simple twist movement. The float switch is infinitely height-adjustable. The high-quality ceramic/rubber mechanical seal ensures a long service life, and the housing is also made of impact-resistant plastic. A cable winding option is integrated into the housing. The ergonomic carrying handle allows for easy transport. A 90 angle G1 (approx. 47.8 mm) male x G1 (approx. 47.8 mm) male, a universal adapter for 25/32 mm hoses and 33.3 mm (G 1) male thread ensure the appropriate connection . ~Technical data:Flat suction up to 1 mmPower 700 WLength of power cable: 10 mMax. Immersion depth: 7 mMax. Foreign body size: 35 mmMax. Delivery pressure: 0.8 barMax. Delivery height: 8 mMax. Flow rate: 16000 l/hMax. Water temperature: 35 CMin. Water level pump start: 10 mm Type pressure connection: 47.8 mm (G11/2 IT)

Compact and robust dirty water pump with oil-filled submersible motor with 0.55 kW/230 volts. Flow rate max. 230 L/min, delivery height max. 8 m, connection 5/4?IG. Dimensions: Height only 410 mm, diameter 245 mm. Thanks to the special level controller and compact design, it is ideal for dirty water shafts where space is limited, e.g. cleaning milking parlors, seepage shafts in driving silos, etc. Switching range of the float switch min. 10 cm, max. 20 cm.

For tough use, e.g. for floods, seepage shafts or flooded construction pits, secure stability, long mileage. 1300 W, flow rate max. 23,000 l/h, delivery height max. 10 m, immersion depth 5 m, foreign bodies up to 40 mm, connection cable 10 m, float switch, pressure connection G 2" IT, universal connection nozzle 2" AG, 90 angle, double Mechanical seal, cast iron pump wheel.

The Einhell dirty water pump GE-DP 7935 NA ECO with aqua sensor works with Eco-Power and delivers a delivery rate of 19,000 liters per hour at 790 watts, with a maximum delivery height of nine meters. The maximum immersion depth is seven meters. The pump is designed for foreign bodies with a diameter of up to 35 millimeters. This makes the dirty water pump suitable for powerful pumping out of ponds, construction pits, basement rooms or for rainwater use. Thanks to the Aquasensor technology, the pump works with patented sensor settings at three automatic starting heights or can be used in continuous operation. Due to the integrated aqua sensor, the pump has a slim design and can also be used in narrow shafts. A high-quality mechanical seal ensures a long service life. The robust housing is made of impact-resistant plastic with a stainless steel outer skin. The hose connection on the top of the pump is easily accessible. The equipment includes the ergonomic carrying handle, a ten meter power cable and the cable winder as well as an integrated hanging loop. Technical data:Mains connection 230VPower 790WFlow capacity max. 19000l /hDelivery height max 9mImmersion depth max 7mWater temperature max 35CGrain size max 35mmHose connection 6/4" AGPower cable 10m H07RN-F

Robust dirty water pump for emptying garden ponds, cellars, seepage shafts, etc. With the permanently installed float switch, the pump switches on and off automatically. Dirt up to a grain size of 15mm can be vacuumed out. Housing off Stainless steel, with comfortable carrying handles and cable storage.Technical data: Mains connection: 230V 50 Hz Input power: 630 W Max. delivery rate: 17,000 l/h Delivery height max.: 8 m Immersion depth max.: 5 m Water temperature max.: 35C Hose connection: G1 IT Foreign bodies max.: 15 mm Power cable: 10m Switching point ON: approx. 50 cm Switching point OFF: approx. 5 cm Suction height: approx. 40 mm Weight: 5.5 kg

Newly developed submersible pump for clear and dirty water up to grain size 30 mm. Max. delivery rate 7500 l/h, delivery height max. 5 m, motor 450 watts 230 volts. Pressure connection 5/4?IG, complete with float switch and hose connection.

Practical water pump with integrated electronics and dry-running protection for automatic water supply in your garden. Flow rate up to 3500 L/h, pressure max. 4.5 bar, suction height max. 8 m, power 1,100 watts/230 volts, connections 1" female thread.

Compact domestic waterworks with 20l boiler, assembled ready for use, suction height max. 9m, pressure height 50m. Housing made of robust cast iron, shaft made of stainless steel, membrane boiler suitable for drinking water. Flow rate max. 70l/min, connections 1"

Reliable domestic waterworks with 900 watts, flow rate up to 3500 L/h, pressure max. 4.5 bar, boiler capacity 24 L. Robust system for automatic garden supply, for irrigation, pumping around or pumping out clear water.

Powerful domestic waterworks with 1300 watts, max. delivery rate 4500 L/h, pressure 4.8 bar = 48 m delivery height, boiler capacity 24 L. High-quality version with boiler ~ and stainless steel pump.

Powerful domestic waterworks with a maximum flow rate of 6000 l/h, pressure 5.5 bar = 55 m delivery head, boiler capacity 50 L, suction height max. 8 meters. Ideal for larger gardens or multiple extraction points.

Robust pump boiler unit with pressure switch and 60l boiler. Maximum pressure 5bar, delivery rate max. 70l/min, suction height 9m. Technopolymer impeller with stainless steel shaft.

230 V - 750 watts, max delivery height 11 m, max. delivery rate 600 l/m, for dirt and wastewater from industry, municipalities and agriculture, up to grain size 30 mm, with float switch, pressure outlet 3" female, "absolute professional quality".

Fäkalienpumpe mit integriertem Schneidwerk und Schwimmschalter. Motor mit 0,75 kW/230 Volt, Förderleistung max. 250 L/min, Förderhöhe max. 16 m, Gewicht 26 kg, Anschluß 2 Zoll IG. Ideale Pumpe für die Beseitigung von Hausabwässern, für Wochenend- und Ferienhäuser usw.Neue Ausführung serienmäßig mit Motorschutzschalter. Verhindert zuverlässig mögliche Schäden an der Pumpe durch das Verklemmen von Feststoffen im Schneidwerk.Pumpengehäuse und Laufrad aus robustem Grauguss, Hackwerk aus rostfreiem Stahl.Mit ölgekühltem Doppel Gleitdichtring (Unterdichtung aus Siliziumkarbid, Oberdichtung aus Keramik).Antriebswelle aus Edelstahl. Iso-Klasse F. IP68, maximale Flüssigkeitstemperatur 50 °C, pH 6-10Fördervolumen bei Förderhöhe:4m – 159 L/min8m – 130 L/min12m – 88 L/min16m – 30 L/minMaße der Pumpe:A 460 mmB 290 mmC 295 mmD 255 mmE 490 mm

Handy and practical pump for pumping, pumping out or spraying clear water. Motor 450 watts / 230 V, max. delivery rate 2000 l/h, max. delivery height 30 m = 3.0 bar, connections. 1" IT.

DescriptionVersatile and effectiveWatering beds, sprinkling green areas, sprinkling fields in agriculture, pumping water from water reservoirs and wellsApprox. 2.5 hours running time with one tank full at 75% load Robust, durable and reliableWorks in all weather conditions Spiral casing and impeller made of cast iron, ensuring maximum robustness and a long service life for the pumpPowerful and efficient 4-stroke engine, easy to start under all conditions Robust steel frame with vibration dampers Easy to useQuick and easy commissioning by directly generating the negative pressure and connecting the hoses to the pumpEasy to transport due to its low weight< /li>Convenient maintenanceTechnical data:Length x width x height: 470x386x450mmWeight: approx. 23kgType fresh waterMax. Delivery height: 30mFlow rate: 556l/minSpeed speed: 3600/minInlet-outlet thread: 2?Inlet-outlet : 50.8mmSuction height: 7mMax. Grain size: 7mmEngine: 4-stroke OHV, 1 cylinder (top valve)Fuel: petrolEngine power: 4kw Starter: pull starterTank capacity: 3.6lRunning time at 75% load: 2.5hEngine oil volume: 0.6l Sound power level LWA 77dB (A)Delivery pressure: 3barAccessories: hose connections 50mm plastic, hose clamps and suction filter

An all-rounder for the ambitious hobby gardenerThe Einhell dirty water pump GC-DP 3325 is a compact all-rounder for drainage around the house and garden. Emptying ponds and smaller garden bodies of water, pumping out flooded construction sites and basements, and draining rain barrels and cisterns are no problem for the all-rounder! The 330 watt motor provides the necessary power to pump up to 9,500 liters per hour with 0.6 bar delivery pressure over a maximum delivery height of 6 meters.The Einhell dirty water pump GC-DP 3325 is ideal for Pumping out water with large amounts of foreign bodies up to 25 mm and a delivery rate of up to 9,500 liters per hour. The 330 watt pump provides excellent service when pumping out dirty water in cellars or construction pits, when cleaning the pool or garden pond or in cisterns and fountains as well as large rain barrels and water reservoirs. A folding carrying handle is attached to the pump housing made of impact-resistant plastic for improved mobility. The pump has a continuously adjustable float switch and a high-quality mechanical seal for a long service life. The pump is equipped with a universal connection for 25/32 mm hoses and G 1 external thread (33.3 mm) as well as a 90 angle for multiple connection options.Foldable carrying handle< li>Infinitely adjustable float switchHigh-quality mechanical sealPump housing made of impact-resistant plasticUniversal connection for 25/32 mm hoses and G 1 (33.3 mm ) AG90 angle G1 (approx. 47.8 mm) AG x G1 (approx. 47.8 mm) AG ~Technical data:Power: 330 WLength of power cable: 10 mMax. Immersion depth: 7 mMax. Foreign body size: 25 mmMax. Delivery pressure: 0.6 barMax. Delivery height: 6 mMax. Flow rate: 9500 l/hMax. Water temperature: 35 CType of pressure connection: 47.8 mm (G11/2 IT)

Set price!

Max. suction height 7 m, working cylinder 75 mm , delivery rate approx. 28 L/min. For 1 1/4? suction line, with round flange and cast iron handle support that can be rotated in all directions.

DescriptionPowerful and reliable in continuous operation under the toughest conditionsVersatile and powerfulPumping out pond systems, pumping out cellars e.g. during floods, watering flower bedsSucks up even water contaminated with sand, cleaning agents or oil, e.g. wastewater, mud, ...Approx. 2.5 hours running time with one tank full at 75% load Robust, durable and reliableWorks in all weather conditions Spiral casing and impeller made of cast iron, resulting in maximum robustness and a long service life of the pump, even when used with water containing sandPowerful and efficient 4-stroke engine, easy to start under all conditionsMore robust Steel frame with vibration dampers Easy to useQuick and easy commissioning by directly generating the negative pressure and connecting the hoses to the pump Convenient maintenanceTechnical data:Dimensions (LxWxH): 560x430x465mmWeight: approx. 30kgType dirty waterMax. Delivery height: 26mFlow rate: 966l/minSpeed: 3600/minInlet-outlet thread: 3"Inlet-outlet : 76.2mmSuction height: 7mMax. Grain size: 27mmEngine: 4-stroke OHV, 1 cylinder (top valve)Fuel: petrolEngine power: 4.5kW< li>Cooling: airStarter: pull starterTank capacity: 3.6lRunning time at 75% load: 2.5h Engine oil volume: 0.6l Sound power level LWA: 77dB (A)

Made of cast iron to match the hand fountain pump. Height 70 cm.

Powerful pressure submersible pump ideal for watering the garden as it has an integrated electronic pressure switch with dry-running protection. 4 wheels made of Noryl,  ~15m connection cable, thermal protection, ~ Stainless steel shaft and integrated check valve.Technical data:Mains voltage: 230 VFrequency: 50 HzMotor power (P1): 1200 W Protection class (IP): Delivery height: 40 mmax. Immersion depth: 12 mmax. Grain size: 1 mmmax. Suction: 20 mmmax. Water temperature: 35 CConnection thread: AG 1 "Length of the connection cable: 1500 cmLength: 170 mmWidth: 170 mmHeight: 515 mmNet weight: 10 kg

The Einhell submersible pressure pump GE-PP 1100 NA with automatic function automatically switches the device on and off again when water is required. The pump provides the necessary pressure to transport clear water from the rainwater cistern, the water reservoir and shaft or the garden fountain to the desired location. Even a delivery height of a maximum of 45 meters is no problem for the pump. With a maximum immersion depth of 12 meters, it works with 1,100 watts in continuous operation and, thanks to a 15 meter long power cable, can be used flexibly in the garden and outdoor areas at home. The maximum delivery rate is designed at 6,000 liters per hour. The submersible pressure pump not only makes a solid impression on the outside, it has a particularly robust design and is equipped with important safety features. A 4-stage impeller system ensures an extra high delivery pressure. The housing is made of stainless steel, the pressure connection is equipped with a stainless steel insert. The high-quality mechanical seal is the basis for a long service life. The 33.3 mm (1" IT) hose connection on the top of the pump is easily accessible. The integrated dry-running protection and the overload switch protect the pump from damage if the water supply is interrupted. Technical data:Mains connection: 220-240V / 50HzPower: 1100WMax . Flow rate: 6000l/hMax. Delivery height: 45mMax. Immersion depth: 12mMax. Water temperature. 35CHose connection: 1"~ 33.3mm IGPower cable: 15m H07RN-FWeight: 8.7kg

Sensational new development in the pump sector. Clear water, dirty water and flat suction pump in one. Allows you to pump out dirty water with a particle size of up to 30 mm. Pumping clear water with high performance (14,000 l/h) and emptying up to 1 mm liquid level (flat suction). Standard with float switch and power plug with selection buttons for quick switching to manual (flat suction) or automatic operation. Output: 14,000 l/h, delivery height 8.5 m, pressure connection 6/4?IG, hose connection with stepped nozzle 6/4? and 5/4?, motor: 770 watts/230 volts.