Power Tools, Machines & Accessories
Compressed air die grinder
Collet 6 mm suitable for all standard mounted points and milling cutters. Shaft 3 and 6 mm. Idle speed 24000 rpm. Weight only 0.4 kg, complete including 10-piece grinding pencil assortment and case.
Compressed air drill
Right/left rotation, 1800 rpm, 1/4? female connection, maximum pressure 6 bar, minimum air consumption 250 L/min. New model with quick-release chuck.
Compressed air grease gun
Practical grease gun with a capacity of 500 g. Suitable for cartridges or loose grease. Complete with tube, hose and mouthpiece.
Compressed air grease gun
With vent valve and filling nipple for grease filling device. Pressure ratio 1:50 - recommended working pressure 6 bar. Capacity 500 cc, for filling with cartridges, loose fat and through filling devices. Complete with nozzle pipe and Hy mouthpiece.
Compressed air hand saw MS1
Air consumption approx. 250 L/min., cutting performance in steel approx. 1.6 mm, weight only 0.6 kg, including saw blades.
Compressed air hose 10x16
For professional use ~Hybrid polymer material with fabric insert, extremely flexible even at low temperatures, abrasion-resistant and high resistance to environmental influences, such as. B. UV light, oil, ozone.Operating pressure up to a maximum of 20 bar, significantly lower weight than rubber hoses.Can be used in temperature ranges between -40C and 80C.Equipped with kink protection at both ends and a quick coupling and plug-in nozzle
Compressed air hose commercial
Compressed air rubber hose extremely flexible and light. Antistatic and silicone-free, resistant to oil, gasoline, chemicals, weather and more. Fabric reinforced.Working pressure up to 20bar, blasting pressure 70bar. Temperature range -40C to +100C. Inner diameter 10mm. Incl. steel coupling and nipple.
Content: 10 m (€5.80 / 1 m)
Compressed air hose Flexair 9mm ID / 14.5 mm OD
Extremely flexible fabric compressed air hose, even at low temperaturesParticularly resistant to compressed air containing oil. Inner diameter 6mm, operating pressure max. 15 bar. Complete with nozzle and coupling
Compressed air hose hybrid 10m
High-quality professional DL hose with 10m length and 9.5x15.5mm (3/8"). Completely including quick coupling.Thanks to the hybrid technology - particularly resistant, even against compressed air containing oil, ideal for e.g. Impact wrench.
Content: 10 m (€3.80 / 1 m)
Compressed air hose professional
Inner 8.5 mm, length 10 m, complete with coupling and plug, highly flexible and abrasion-resistant. For tough use.
Content: 10 m (€5.00 / 1 m)
Compressed air hose reel 9.5/15 Pro
High-quality polyurethane compressed air hose with fabric insert for professional use in workshops, garages, etc. Hose is equipped with kink protection, swiveling steel bracket for wall or ceiling mounting. Locking and automatic rolling up of the hose by simply pulling.Technical data:Hose inside: 9.5 mmHose outside: 13 mmHose length: 15 mOperating pressure: 15 barConnection thread : 1/4?Connection thread type: external threadDimensions (LxWxH): 320x140x380 mmWeight: 12 kgScope of delivery:Swivel bracket for wall and ceiling mounting< /li>Quality quick coupling Quality plug nipple
Compressed air hose reel DST 10/30
Robust hose reel with automatic rewind and locking mechanism for easy operation.Sturdy steel frame for heavy-duty use. Mounts to the floor, ceiling, or wall using the two large guide rollers.Equipped with a high-quality 30 m PU mesh hose with a 9.5 mm inner diameter and a 20 bar operating pressure.1/4" male thread connection compatible with standard DL couplings (e.g., part no. 7378).Complete with a 1-meter connection cable and quick-connect fitting.
Compressed air hose reel RST-20
Automatic hose reel with 20 m hose length. Hose inner diameter 9.5mm, maximum pressure 17 bar, connections male thread. Complete with 1.7m connection hose including 1/4?AG nipple. Matching quick coupling for hose 7378 and plug nipple for inlet Faie No. 7372.
Compressed air hose with fabric
PU fabric hose up to max. 15 bar. Price per meter.
Compressed air nail gun Profi 90
With adjustable exhaust air outlet For making boxes, disposable pallets, crates, frames, partitions, racks, formwork and for attaching gypsum fiber boards With rubberized handle, cold-insulating, Non-slip and vibration-reducing With bottom loader magazine and contact protection Special features:For strip-bound nails 55-90 mm with an angle of 34 degrees and a diameter of 2. 87 mm, 3.05 mm and 3.33 mmAir requirement: approx. 4.8l/shotWorking pressure: approx. 6bar Weight: approx. 4.5kg Connection: 1/4"~
Compressed air nail scaler LNF 1
Powerful tool for quickly and precisely removing rust from metal, knocking off paint, removing plaster and concrete residue, working on stone, etc. Long service life thanks to the metal design with 12 needles made of special steel. Stroke rate 3800 min, air requirement approx. 170 L/min, weight only 1.2 kg.
Compressed air oil
Resin-free oil for all Compressed air tools, 1 liter.
Compressed air spray gun
With 1 liter container and rigid 300 mm long spray pipe, adjustable spray valve. Now with a large filling opening.
Compressed air staple and nail gun KG50 Profi
DescriptionClamping devices for fastening foil, fabrics, leather, wall coverings, insulating materialsAlso ideal for interior work, especially for fastening tongue and groove boards, profiles, strips, chipboard, etc.< /li>With rubberized handle, cold-insulating, non-slip and vibration-reducingWith bottom loader magazine and contact protectionIn a practical plastic case Special features: Combination device with adjustable exhaust air outletUsable clamps from 16 - 40 mm type 90Usable nails from 20 - 50 mm type F Technical dataAir requirement: approx. 0.6l / shotWorking pressure: 6bar Weight: 1.6kg suitable clamps: 16-40mm type 90 suitable nails: 15-50mm type F
Compressed air stapler KG16
High-quality stapler in a practical PVC case. The large spine width (13 mm) makes it ideal for attaching foil, fabrics, leather, insulating material, etc. Clip size max. 16 mm.
Compressed gas cleaner 300ml
Compressed gas cleaner dust-free ~ - ~ Observe hazard warningsRemoves dust, the finest lint and small particles from hard-to-reach places without contact. Sensitive objects such as films, optics and highly polished metals are protected. Achieves greater productivity through the use of a special gas. A gas volume that can be sprayed out of approx. 80 liters (comparison compressed air: only 5 liters). Contains ozone-neutral propellant. ~Typical uses:Camera, lens and lensesMicroscopes and other optical devicesComputers, keyboards, Printers, USB ports etc.Hifi/stereo system and record playerElectrical and electronic switching elements and modules (e.g. light switch, socket, circuit board, ...)< li>In laboratories and graphic companies For hobbies and workshops APPLICATION:When using, always hold the can upright and spray. Spray at a distance of 2 - 5 cm from the object. Press the spray head at short intervals. Do not shake before use! Not suitable for camera reflex mirrors. ~Danger and safety instructions:Extreme flammable aerosol. Container is under pressure: may burst if heated. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. Do not smoke. Do not puncture or burn, even after use. Protect from sunlight and do not expose to temperatures exceeding 50C. Send the contents/container for recycling.Colour: colorless, clearSmell: odorlessBoiling range: approx. -48C (propane)Flash point: approx. -104C (Propane) Lower explosion limit: approx. 1.5 vol% (propane)Upper explosion limit: approx. 10.9 vol% (propane)Solubility in water: practically insoluble
Compresseur 220/08/24 sans huile
Affordable and compact compressor for private users. No maintenance and clean compressed air thanks to oil-free design. 24 L tank with wheels and integrated handle. Complete with pressure switch, pressure gauge and pressure reducer. Technical data: Suction capacity 140 l/minMaximum pressure 8 barMotor 1.1 KW/ 1.5 HP 230 VoltTank capacity 24 L Own weight only 22 kg
Compressor 423/50
High-performance two-cylinder units made of gray cast iron for a long service life and low operating noise. Large fan impeller and a cooling air deflector on the cylinder for optimal compressor cooling Aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air Sturdy metal belt guard Filter pressure regulator with pressure gauge “Made in Germany” for regulated compressed air that is free of condensate, dirt, and oil Ten-year warranty against rust-through on powder-coated compressed air tanks Includes a high-quality composite safety coupling and a high-quality CONDOR pressure switch Sturdy steerable chassis with parking brake, combined with large, puncture-proof PU wheels. Technical Specifications: Intake capacity: approx. 390 L/min Filling capacity: approx. 290 L/min (6 bar) Maximum pressure: 10 bar Motor: 2.20 kW/3.0 PS, 400 volts Tank capacity: 50
Compressor 703/100 P
Maximum, robust equipment and best quality at an affordable priceFully automatic on/off operationWith all safety devicesCompletely ready for connection, quality electric motorQuality electric motor with high starting torque is equipped with a motor protection switchStarting capacitor and starting relief valve ensure easy startingWith phase inverter as standard for easy manual reversal of the direction of rotationCompressed air compression via high-performance HOS unitThe start-up relief valve ensures easy and unpressurized start-upThe two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation and a long service lifeThis ensures an even longer service life due to even less wear and tearHigh-quality compressor with optimum lubrication for a long service life and high reliabilityEquipped with high-quality intake filterThe aftercooler with large cooling fins ensures a low boiler inlet temperature and therefore less moisture in the compressed air, which protects the compressed air toolsAdditionally with intercooler to the aftercoolerCorrosion-free valve plates for improved heat dissipation and compressor longevity The large fan wheel and a cooling air baffle on the cylinder ensure optimum cooling of the compressorA sturdy metal belt guard ensures optimum protection of the components and a high level of user safetyCompressed air supply to the boiler via flexible armored hose line with heat protection prevents vibration breakageHigh-quality drive beltPowerful and economical driveThe toothed drive belt makes starting easier, improves smooth running and power transmission and reduces power consumption by up to 30%Sturdy metal belt guardOperation on the maintenance blockEquipped with a high-quality CONDOR MDR 5 pressure switch with robust push-button function for fully automatic on/off operationFilter pressure regulator for infinitely variable adjustment of the working pressure, with simultaneous dirt, oil and condensation water separationTwo large pressure gauges indicate the tank and working pressureAir tapping at the maintenance block via a convenient safety quick-release couplingOn the maintenance block only fixed screw connections, no hose connectionsTwo compressed air tapping pointsOne compressed air outlet for filtered compressed airOne compressed air extraction point via direct outlet on the boiler with ball valveComfort safety coupling - The advantages.Comfort safety couplings from AIRCRAFT are the first manufacturer to use them as standardTwo separate locking systems for maximum work safetyDangerous whipping of the hose line is preventedComfortable and safe to transport and set upErgonomically extended handle for comfortable transportation in an almost upright position - strain on the back due to lifting is avoidedPuncture-proof PU foam wheels and stable steering chassis with parking brake enable easy transportationThe parking brake prevents both turning and rolling movements of the wheels and ensures that the compressor stands perfectly stillWith practical second transport handle on the tank, which makes it easier to carry the compressorHigh-quality tank with durable rust protectionAIRCRAFT is the first manufacturer to equip the AIRPROFI series compressors with hot-dip galvanized boilers inside and out as standardThe AIRPROFI series boilers therefore come with a 15-year guarantee against rusting through.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
