Automotive special

The axle boot clamping pliers are ideal for use with axle boots, radiator and fuel hoses. It is essential when processing ear cuffs (oetiker). It is equipped with an ear hold-down device that prevents the cuff fastener from coming loose.

High-quality oil pump set with stable trolley. The perfect solution for easily filling your vehicles or systems. The sturdy trolley with large wheels ensures easy transport of containers/barrels up to 220 liters. Pneumatic oil pump Made in Italy with 3:1 gear ratio. Working pressure 2 - 8 bar via any commercially available compressor. Complete with 4 meter high-quality outlet hose and oil dispensing gun with digital counter for easy monitoring of the correct filling quantity. Oil delivery rate approx. 14 L/min. With this oil pump set you can fill engine, transmission, hydraulics and other oils quickly, cleanly and in the right amount.

The 12-piece Precision mechanic set is a must for every mechanic. It consists of 2 slotted screwdrivers, 2 Phillips screwdrivers, 4 profile screwdrivers and 4 hooks. These are equipped with a 2-component handle. Length 170mm.

The radial seal assembly and disassembly set enables easy, non-destructive assembly and disassembly of radial seal rings. The new radial sealing rings are pressed into their correct position using the various anodized adapter rings. The included puller is used to remove the radial sealing rings. This tool set can be used universally for diameters from 21.5 to 64 mm.Scope of delivery:7 aluminum adapters for pressing in the radial sealing rings5 large adapters 7 adapter rings for the most common central screws (M8, M10, M12, M14, M16, M18 and M20) 1 puller for removing stuck radial sealing rings

Tire stand for space-saving storage of 4 car tires. Horizontal storage of the tires, suitable for tire widths up to 225 mm, plug-in system, easy to assemble.

Chrome-plated special brake line wrench with reinforced hexagonal openings and double offset. Length 175 mm, wrench sizes 10 mm and 11 mm.

Granular, free-flowing and scatterable natural product made from highly porous volcanic rock for binding oils, emulsions, varnishes, alkalis and acids. Particularly non-slip even on oily surfaces. Bulk density 320-350 g/l. Chemically neutral, non-toxic, 1 kg binds up to 1.14 L of oil. Grain size 0.3 - 1.5 mm. Contents 20 L (approx. 7 kg), binds up to 8 L.

The spring compressor set with plastic protective inserts is ideal for assembling and dismantling the McPherson springs on the front and rear axles. A spacer is available for springs that taper in one direction. This means that small and large penholders can be used together. The spacer causes an offset of 30 mm. The plastic protective inserts prevent the spring coating from being accidentally scratched, thus reducing the risk of rust and the spring breaking again. The different pairs of spring holders with a diameter of 60 mm - 21.2 cm enable use on many types of vehicles such as BMW, Toyota, Ford, Opel, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi /strong> etc. The spring compressor has a maximum clamping force of 1500 kg, a working distance of 30 cm and is not suitable for impact wrench operation. for quick and professional removal and installation of spring struts< /li>suitable for most McPherson struts with conical and cylindrical springs

Set with sizes 8x10, 11x13, 14x15, 17x19 and 21x22mm. The keys are made of chrome/vanadium, matt chrome-plated and cold forged, delivered in the practical Tetron roll-up bag.

With non-slip fabric tape for all round screw connections and filters, also suitable for stiff filters.Span width up to 140mm, length of tape 220mm

With solid fabric tape, ideal for changing filters for any car.

Practical tool for replacing lost screws, nails etc. With practical clip. Total length max. 65 cm.

High-quality thread cutting set especially for fine threads made of tungsten steel.Sizes and pitches: M2 x 0.4 - M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M6 x 0.75 - M7 x 1.0 - M7 x 0.75 - M8 x 0.75 - M8 x 1.0 - M8 x 1.25 - M9 x 0.75 - M9 x 1.0 - M9 x 1.25 - M10 x 0.75 - M10 x 1.0 - M10 x 1.25 - M10 x 1.5 - M11 x 0.75 - M11 x 1.0 - M11 x 1.25 - M11 x 1.5 - M12 x 0.75 - M12 x 1.0 - M12 x 1.25 - M12 x 1.5 - M12 x 1.75 - M14 x 1.0 - M14 x 1.25 - M14 x 1.5 - M14 x 2.0 - M16 x 1.0 - M16 x 1.5 - M16 x 2.0 - M18x1.5

Universal binder, based on calcium silicate hydrate highly absorbent, odor-binding, natural product, can be stored indefinitely Color: whiteApplication: for quick and easy removal of spilled liquids such as oils, Greases, lubricants, paints and varnishes, solvents, etc. aggressive, organic and inorganic, as well as water-soluble chemicals can be absorbed not suitable for strong acids and oxidizing agents not water-repellent, not buoyant can be used in almost all work areas where liquids are processed or stored or transported suitable for indoor and outdoor use Note: Do not dispose of the binder in the residual waste after use, but dispose of it properly in compliance with the official regulations for the media collected. Further technical properties Type: lllR Suction power max.: 16 (per bag)l Material: calcium silicate Container: bag

The universal brake piston reset tool set is a comprehensive range for resetting the brake pistons of all common car brands. The included clockwise spindle brake piston resetter pushes the pistons back gently and evenly. This means that no damage to seals or anything else is caused by uneven pressure.Scope of delivery:0 = General Motors2 =CitronXM , Xantia and others3 =Alfa Romeo, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes-Benz, Mitsubishi, Nissan, Rover, Toyota, VW4 =Alfa Romeo 164 2.0, Ford, Mazda, Saab 9000, Subaru5 = Adapter with 19 mm (3/8?) internal square drive6 =Nissan Primera, < strong>VWGolf IV7 =Audi 80, 90, V8 + 100, Ford Sierra ABS + Scorpio from '85, Honda Prelude, Nissan Sivia 1.8 turbo, Rover 8000, Saab 9000, Subaru L+Z, VW Golf and Passat8 and 9 =General MotorsN =RenaultG =Opel

Only first-class tools: 12-piece combination wrench set, combination pliers 180 mm, water pump pliers 240 mm, hexagon sockets made of CrV steel, high-gloss chrome-plated with 1/2? drive, ratchet with 1-finger switch, Handles oil-acid resistant. Locksmith's hammer 300 g, in a practical case.

Suitable for checking pressure and vacuum systems such as checking boost pressure, vacuum solenoid valves, tank ventilation, MAP sensors, etc. Can also be used for brake bleedingNot suitable for fuel systems (petrol/diesel) 63.5 mm pressure/vacuum pressure gaugePressure display range 0 to 3 barVacuum display range -0 to -1 barMax. Negative pressure -0.7 barMax. Pressure 3 bar

Compact container with 30l capacity. Funnel diameter 420mm, tube (adjustable) : 50mm. Minimum height 680mm, maximum height 1650mm. With 4 wheels for easy transport (wheel diameter 60mm)

Practical, mobile collection container with 65L content. Complete with safety valve, pressure gauge and outlet hose for easy emptying with compressed air. Drip tray with 16L capacity and stopcock on a height-adjustable tube for easy and clean work.

Professional waste oil collection container with a filling volume of 65l.With transparent intermediate storage for quantity control.Technical data:Working pressure: 6-8barAir consumption: approx. 150l/min Container capacity: 65lOil cup volume: 16lThe device includes the following suction probes (1 piece each):5mm x length 80cm made of copper, suction line approx. 1.9l/min6mm x length 80cm made of copper, suction line approx. 3.2l/min6mm x length 70cm made of PVC, suction line approx. 4.2l/min8mm x length 70cm made of PVC, suction line approx. 6.2l /min6mm x length 80cm made of PVC, suction line approx. 3.7l/min8mm x length 80cm made of PVC, suction line approx. 5.2l/min

The windshield wiper arm puller allows many common wiper arms to be removed with absolutely no problem. Best possible use for corroded and stuck wiper arms.

This workshop crane is ideal for (dis)assembling engine blocks, but is also often used for lifting and moving other heavy objects. The crane's arm can be locked in four different positions: 250kg, 500kg, 750kg and 1000kg. The locking pin has a practical handle. The lift is equipped with a rotary knob for lowering the arm, which ensures ease of use and additional safety. The crane is also foldable and therefore easy to store. Technical data: Dimensions in use: 1540x1040x1400mm LxWxH. Folded footprint: approx. 49x46cm. Max. lifting height: 1,000kg (length 1080mm) = 1920mm, 750kg (length 1170mm) = 1990mm, 500kg (length 1260mm) = 2050mm, 250gk (length 1350mm) = 2120mm Distance between the wheels: 940mm Dead weight: 66kg

High-quality workshop crane with a sensational price-performance ratio.Lifting capacity up to 1 ton or 250 kg with a short or long lifting arm.Thanks to the foldable outriggers and casters, it requires minimal storage space and is easy to transport to the work site.