Promotions

New inch set in the usual Proxxon industrial quality, 12 pieces.Wrench sizes: 1/4" # 9/32" # 5/16" # 11/32" # 3/8" # 7/16" # 1/2" # 9/16" # 5/8" # 11/16" # 3/4" and 13/16".With permanent laser marking and large, clearly legible key sizes. The innovative heads are polished, slim and thin-walled - high comfort with low size and weight.With elaborate surface treatment (2x nickel-plated, 1x matt chrome-plated) with a skin-friendly finish.

High-quality key set with practical plastic holder for safe and tidy storage. Contents: Widths across flats: 6-7-8-9-10-11-12-13-14-15-16-17-18-19 and 21 mm.

Ring side angled 15. Jaw position 15. Chrome vanadium steel. Surface matt satin chrome plated. In the holder.Contents: 1/4.5/16.3/8.7/16.1/2.9/16.5/8.11/16.3/4.13/16.7/ 8.15/16.1,1.1/16,1.1/8,1.1/4".

Design according to DIN 3113, Form A, ISO 3318, ISO 7738. Ring side angled 15. Jaw position 15. Surface matt satin chrome plated. Chrome vanadium steel. In the holder.Contents: 6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,27,30,32 mm .

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

​Many beekeepers are reluctant to use the relarving method. Working with the breeding cassette simplifies this method considerably. The queen is locked into the cassette and lays her eggs directly into the cups attached to the back of the honeycomb grid. This means that the larvae are in the queen cell right from the start and can be easily transferred.Not the original Nicot! REPLICAThe bases, queen cup holders, and hatching cages included in the set are not compatible with the supplementary items we offer. Please always order the base (Item No. 123924), queen cup holder (Item No. 123925), and hatching cage (Item No. 123929) together as an extension for the breeding frames!Application:Remove the barrier grid and protective plate and fit the breeding cassette in an empty frame.Place the queen cups in the designated places.Close the protective plate and hang it in the hive for 2 days without the barrier grid. Tip: Grease the plastic box with wax to make it more attractive to the bees.After the bees have familiarized themselves with the 'foreign body', the barrier is attached and the queen is added through the entrance hole.After a further 2 days, the cups are usually pinned and can be transferred to the prepared breeding frame and then hung in suitable care colonies.Contents:1x breeding boxApprox. 100x queen cups10x bases10x queen cup holder10x hatching cage

DL chisel hammer for medium chiseling work and light demolition work. Piston stroke 50 mm, stroke rate 3600 rpm, air consumption approx. 250 L/min, complete incl. 1 flat and 1 pointed chisel and 1 wide flat chisel. The impact energy is 10 joules.

Perfect for restoring cars, motorcycles, boats and tractors, four nozzles included for different applications. Selective processing without dismantling the component is also possible. The inner and outer edge attachments are suitable for door edges, bumpers or sills. Low-dust work thanks to the practical collection bag.Average air requirement: 200-350 l/min.Working pressure: 2.8 - 8.0 barContainer volume: 0. 9 lBlast media grain size: 0.12 - 0.25 mmNozzle diameter: 4.5 mmDimensions: 330x100x250 mmWeight: 0.85 kg

Air consumption approx. 250 L/min., cutting performance in steel approx. 1.6 mm, weight only 0.6 kg, including saw blades.

Length 150mm.

Length: 150mm, spring diameter: 8-25mm, wire diameter: 0.9-3.25mm

3 - 20 mm, length 200 mm.

Two-cylinder high-performance units made of gray cast iron for a long service life Made of metalStarting capacitor and starting relief valve ensure easy starting on 230 volt modelsTank pressure gauge Made in GermanyFilter pressure regulator with pressure gauge Made in Germany for regulated compressed air that is cleaned of condensate, dirt and oilTen-year guarantee against rust through on powder-coated compressed air tanksIncludes high-quality composite safety coupling and high-quality CONDOR pressure switchLarge ergonomic bow handleStable steering chassis with parking brake in conjunction with large, puncture-proof PU wheels

Mobile piston compressor with belt driveTwo-cylinder high-performance units made of gray cast iron for a long service lifeLarge fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressorQuality electric motor with high tightening torqueElectric motor equipped with motor protection switchAftercooler with cooling fins ensures a low container inlet temperature and thus less moisture in the compressed airStable belt grid protection made of metalStarting capacitor and starting relief valve ensure easy starting on 230 volt models400 volt models as standard with phase inverter for easy manual reversal of the direction of rotationCompressed air tank equipped with safety valve, tank pressure gauge and condensate drain valveInclusive of all safety devicesCompletely ready for connectionFilter pressure regulator with a pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for container pressureTen-year guarantee against rust through on powder-coated compressed air tanksIncludes high-quality composite safety coupling and high-quality CONDOR pressure switchFlexible armored hose line with heat protection for a long service life without vibration breakage< li>Ergonomic handle, rubber handle and transport handle on the compressed air tank for comfortable transportStable steering chassis with parking brake in conjunction with large, puncture-proof wheels for comfortable transportThanks to the two-stage compression 2-cylinder -High-performance unit with very low speed, a particularly quiet and low-vibration operation is achievedThis ensures a longer service life due to less wear In addition with an intercooler for the aftercooler Compressor system : HOS Suction capacity approx.: 650l/minFilling capacity approx.: 520l/min Explanation of filling capacity at: 6 bar working pressureNumber of cylinders: 2 Number of compression stages: 2Compressor speed: 950min Compressed air tankMaximum pressure: 10bar Tank capacity: 100l

​Compact compressor with a 2-cylinder, 2-stage high-performance unit with approximately 620 L/min suction capacity and a filling capacity of 520 L/min (at 6 bar).Also suitable for demanding DL tools.Electric motor with 4.8 kW/6.5 HP at 400 volts. Slow compressor speed of only 950 rpm for quiet operation and a long service life.The compact 90 mm reservoir and high-quality chassis also make it suitable for mobile use.Very powerful compressor with high-quality CONDOR pressure switch and composite safety clutch at a special price.

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 320 L/min, speed 1420 rpm, required. Motor power 1.8 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.5 L.

Cast iron compressor with 2 cylinders with aftercooler, suction capacity 556 L/min, speed 1440 rpm, required. Motor power 4.0 kW. Complete with filter and fan wheel 280x13 mm. Oil filling quantity 0.9 L.

Cast iron compressor with 2 cylinders and 2-stage compression, suction capacity 820 L/min, speed 1215 rpm, required. Motor power 5.5 kW. Complete with filter and fan wheel 398x9.5 mm. Oil filling quantity 1.34 L.

pieces 4 to 12 mm, in sheet steel cassette, professional quality, for stone, concrete and masonry

Innovative Schraublösung mit selbstschneidendem Gewinde für sicheren Halt in Beton. Einfach mit Bohrhammer oder dgl. Loch vorbohren und den Schrauben direkt ohne Dübel einschrauben. Einfaches entfernen nach Bedarf mit Knarre, Schlüssel oder Schlagschrauber. Bohrlochdurchmesser bis 6 mm jeweils -1 mm, 8-12 jeweils -2 mm.

This conical filter bag with hanging loops is designed for filtering liquids and solid particles during the processing of wine, must, mash and similar media. The washable material allows repeated use and supports an economical filtration process. The filter bag is available in 5 litre, 10 litre and 20 litre sizes. Advantages & Functions • Conical shape for consistent liquid flow during filtration • Hanging loops for easy attachment to containers or frames • Washable and reusable for long-term use Frequently Asked Questions What applications is the filter bag suitable for? The filter bag is suitable for filtering wine, must, mash and other liquids containing solid particles. What sizes are available? The filter bag is available in 5 litre, 10 litre and 20 litre sizes.

For connection to a water tank. This means you can connect a low-pressure drinker, for example, using a hose. Connection 10 mm, at the thickest point (nut) 24 mm. Total length approx. 58 mm.