Agricultural machinery
All Products
Connecting hub between hydraulic pump and gearbox or hydraulic pump and outer bearing.
Installation dimensions (xH) = 30x54 mmSuitable for Fendt, Steyr 80 series, 900 series
With O-ring seal. For screwing directly onto Bosch additional control units SB23. Suitable for all tractor types with Bosch SB23 control units e.g. Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor.Can be coupled under pressure!
For the additional installation of a ring eye with an inner diameter of 22 mm. The total length of the coupling including the connecting piece for the ring eye and the screw-in thread is 134.80mm.Suitable for Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor. Can be coupled under pressure!
Push-pull plug-in coupling suitable for Fendt SCR, S4 and Gen6 series.Length (without thread) L: 80 mmL1: 30 mmBulkhead thread 15LSize: BG 3Standard designation: ISO 7241-1 A
Push-pull plug-in coupling suitable for Fendt with collar and O-ring groove for attaching the Fendt original oil leak housing.Length (without thread): 110mmExternal thread: M22x1.5 bulkhead thread 15L Size: BG 3Standard designation: ISO 7241-1 A
12/24 V - 150 W for wall thickness up to 8 mm with rubber cap, 2 screw terminals, switching position: 0-1, thread 22 mm
The pushbutton is a normally open contact. This means that when the pushbutton is pressed, the circuit is closed and current can flow in the working circuit. The pushbutton has an installation thread M12x0.75mm. The maximum switching capacity is 8 A.Suitable for Faie handles no. 34623, 34624, 34625 and 22800
Gummihandgriff zum Aufstecken
Oil-resistant PVC hose with an inner diameter of 8mm for leakage oil collection systems. Price unit is 1 meter.
Suitable as a suction and pressure hose. Lightweight, highly flexible PVC hose with a shockproof spiral made of hard PVC and a smooth inner surface. Operating pressure max. 3 bar, vacuum load 0.9 bar.
Content: 2 m (€46.00 / 1 m)
12 V, 7-pin, with switchablecontact for rear fog lighton the motor vehicle.
Quick change frame basic kit with side locking. For welding on wheel loader consoles so that a transition from the type-specific mount to the EURO mount can be made. With 20 mm thick side panels. Sandblasted surface.
Hand lever can be positioned on the left or right, handle part can be adjusted four times in 90 steps, clamping path, clamping strength and closing force can be adjusted continuously, secured against self-loosening, ventilation via 1/2"~ Ball valve.6 inch = DN150, cup width B = 180 mm8 inch = DN200, cup width B = 200 mm
Shaft made of drop-forged steel, galvanized, yellow chromated, for catch can
Unser Produktleiter
Werner Meixner
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.