Agricultural machinery

Connections: 2 x 38 mm, 1 x 22 mm

Suitable for Steyr with MWM engine

Connections: 38/38/3280 degrees

Suitable for air coil with internal thread M18x1.5screw-in thread M22x1.5

Suitable for air coil with internal thread M18x1.5screw-in thread M16x1.5

M24, for rotating lights

Threaded nipples with a single-end thread for welding onto slurry tanks or slurry containers. Shut-off valves, pipe sections, distribution blocks or quick-connect couplings are attached to the threaded nipple.The pipe sections have a wall thickness of 5 to 6 mm, and the surface is untreated.

Double nipples for connecting gate valves, pumps, pipe bends or quick-connect couplings with internal threads.Length 200 mmThe pipe sections have a wall thickness of 5 to 6 mm, and the surface is untreated.

Suitable for type RM158S, 110, 111, 111S, 112, 112K, 115, 131 from 1976

The threaded connector with ball (male part - VT) for the Bauer system is supplied complete with locking ring. The surface is galvanised.3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm

The threaded connector with cup (nut part - MT) for the Bauer system is supplied complete with sealing ring. The surface is galvanised.3 inch = HK 76, cup width B = 98 mm3 1/2 inch = HK 89, cup width B = 120 mm4 inch = HK 108, cup width B =  145 mm5 inch = HK 133, cup width B = 160 mm6 inch = HK 159, cup width B = 180 mm8 inch = HK 194, cup width B = 230 mm

For welding on consoles or mounting hooks from different manufacturer systems. Lower link hook Cat.2 adjustable in width from 800 mm to 1150 mm.

Suitable adapters make it possible to rationalise the use of existing machines, implements and tools. With the three-point adapter, tools and implements with EURO mountings that are suitable for front loader attachment can be used on the rear or front hydraulics. Bale forks, manure forks, shovels etc. can therefore be used universally.The tools and implements with Euro attachment can also be used with tractors without front loaders. Pick-up height 110 mmLoad capacity 1000 kgWeight 70 kg

Suitable adapters make it possible to rationalise the use of existing machines, implements and tools. With the three-point adapter, tools and implements with EURO mountings that are suitable for front loader attachment can be used on the rear or front hydraulics. Bale forks, manure forks, shovels etc. can therefore be used universally.The tools and implements with Euro attachment can also be used with tractors without front loaders. Pick-up height 300 mmLoad capacity 1500 kgWeight 70 kg

Cat. II, 825 mm shoulder measurement

Cat. I, 683 mm shoulder measurement

For volume regulation for a consumer in both flow directions.Max. Pressure 350 bar.

For quantity regulation for a consumer in one flow direction. E.g.: Raise front loader - free/lower - throttled.Max. Pressure 350 bar.

Inner diameter (d) 65mmHeight (H) 26mmOuter diameter (D) 102mm

Total length: 244mmOuter diameter: 14.8mmCone: 14.5 - 16mm

Interior version