Accessories & spare parts
Handle for hoses
Galvanized, fastened with the help of an additional wide band clamp
Lever set MZ with clamping screw
To fix the slider in the open position.For brass manure sliders and knife sliders.
Manure scraper cylinder
Fully galvanized, hydraulic connection 12L, thread M18x1.5. Single-acting, reset by maintenance-free gas spring, screw-in thread on the manure scraper M30x2.
Plexiglas base for siphon with bayonet lock
Translucent Plexiglas base for the MZ siphon safety device. It is 160 mm deep.
Plexiglass base for siphon
with internal thread, inner 110 mm
RIL lever set for opening manure scrapers
Can be used for 4"~, 5"~ and 6"~ Brass gate valves and knife gate valves.
Sealing ring 130x7mm for sight glass with bayonet lock
Sealing ring for sight glass with bayonet lock suitable for the MZ siphon lock. The inner diameter is 130mm and the thickness is 7mm.
Sealing ring 130x9.7mm for sight glass with ring closure
Sealing ring for sight glass with ring closure suitable for the MZ siphon lock. The inner diameter is 130mm and the thickness is 9.7mm.
Sealing ring 98x5.4mm for sight glass with internal thread
Sealing ring for sight glass with internal thread suitable for the MZ siphon lock. The inner diameter is 98mm and the thickness is 5.4mm.
Sealing ring for manure scraper with flange connection 4 5" 6", ø159 x 6,99 mm
The O-ring has the dimensions 159 x 6.99mm
Sealing ring for manure scraper with flange connection 8
The O-ring has the dimensions 206.6 x 6.99mm.
Sight glass without steel ring
including sealing ring
STORZ replacement gasket
STORZ replacement gasketblack NBR rubber gasket suitable for Storz couplings
Stuffing box 20x27x8mm for MZ manure scraper
Stuffing box seal 20x27x8mm for the slide rod of the manure slider with mechanical manual operation. 2 pieces are required for sealing.
Stuffing box nut with grease nipple
For use on sliders with lever set.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
