Suitable for aebi

Adjusting screw M16x1.5 instead of Aebi, BCS and Reform 580.58662.0

Adjusting screw with thread M16x1.5 for cutter head with serrated holder for Aebi, BCS and Reform.

Cleaning plate

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Cleaning plate

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Cleaning plate

Suitable for AEBI Type A33, A35, A41 center section.

Cone nut M16x1.5 instead of Aebi, BCS and Reform 580.58661.0

Cone nut with thread M16x1.5 for measuring head with serrated holder for Aebi, BCS and Reform.

Cone pin for cutter head instead of Aebi AM167/4

Cone spigot suitable for Aebi cutterhead with clamping claw and for the cutterhead for ESM municipal and universal beams. The spigot has an M10 internal thread and the cone has a diameter of 16 - 18 mm.

Cone screw M8x1x19, SW14

Conical screw M8x1x19 with wrench size 14mm. Suitable for Aebi, BCS and Reform.

Cone screw M8x1x21, SW13

Tapered screw M8x1x21 with wrench size 13mm. Suitable for Aebi, BCS and Reform.

Cutter head completely suitable for Aebi, BCS and Reform

Cutter head complete with fastening screws. Suitable for Aebi BM5 and BM8 with Italian bar, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European bar.We would like to point out that Aebi and Reform have different cutter bars for this cutter head . This means that the length of the fastening screws is not sufficient. You can order a longer taper screw and knife head screw as an accessory (see also below) under the following FAIE numbers: ~ ~Taper screw M8x1x21mm, FAIE number 107996Knife head screw M8x1x20mm, FAIE -Number 107995

Cutter head screw M8x1x20

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

Cutter head suitable for Aebi, BCS and Reform with serrated knife holder

Knife head loosely suitable for Aebi BM5 and BM8 with Italian beam, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European beam with serrated knife holder. The hole spacing of the fastening screws is 76mm from hole center to hole center. The guide roller holder has a width of 43mm.

DIN 75 mower blade blade recessed at the top

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Doppelfinger A81N, 100.8103, high section

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Double finger A83, 100.7834

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Double finger with thread A73

Replacement for single finger A33Suitable for AEBI Type A33, A35, A41 center cut and A71, A73, A81, AM9, AM20

Driver plate

Suitable for AEBI Type A33, A35, A41 center section.

Driver plate

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Finger plate Aebi

serratedSuitable for AEBI Type A33, A35, A41 center cut and A71, A73, A81, AM9, AM20.

Finger screw M10x40 with square head 20x11mm, without nut

Finger screw M10x34mm with square head 20x11mm without nut

Insert sheet 0.5 mm

Shim plate for adjusting the distance between the knife holder and the friction plate. Suitable for Aebi, Agria, Bucher, ESM, Kppl, Nussmller Rasant and Rapid.

Knife head completely suitable for Aebi, BCS and Reform with serrated knife holder

Cutter head complete with fastening screws. Suitable for Aebi BM5 and BM8 with Italian beam, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European beam with serrated knife holder. The hole spacing of the fastening screws is 76mm from hole center to hole center. The guide roller holder has a width of 43mm.

Mower blade back, 160 cm, 21 blades

Mower blade back, 190 cm, 25 blades

Mower blade blade DIN 75 3-hole, recessed at the top

Suitable for AEBI Type A71, A73, A81, AM9, AM20.