Forestry winch

​Hydraulic control valve in monobloc design with electromagnetic 12 volt operation and manual emergency operation via hand lever. Standard radio valve for FAIE crane cable winches. The solenoid valve is double-acting and has a connection for pressure transfer,The connections to the working cylinders are locked in the zero position - no floating position in the O position!Technical data:12 V 3 AFlow rate max. 50 l/min.Operating pressure: max. 175 barConnections: 1/2 inch female thread inlet/outlet and consumer, 1/2 inch male thread for pressure transferControl valve with additional manual emergency operation.

​Electromagnetic actuation with spring return to the centre position = floating position. The centre position is designed with an unpressurised circulation and connections A, B are both open into the return flow. Pressure relief valve on connection P (pump). Negative overlap of the gate valves.Standard version of the valves in parallel connection.Version: DE50Max. flow rate: 50 litres/minOperating pressure: 250 barMax. pressure: 300 barPressure relief valve set: 100 bar, adjustable from 100-250 barScrew-in thread A, B: R3/8″Screw-in thread P, P2, T, T2: R1/2″H=lifting, 0=centre position = SW = floating position, S=lowering. 

Radio control with hydraulic control valve!2-channel radio control set for hydraulically driven winches, oil motors or hydraulic cylinders with 12 volt monoblock valve, the radio is pre-wired with a 7-pin vehicle plug , the solenoid valve is double-acting and has a connection for pressure continuation, technical data: 12 volts 3 amps, flow rate max. 50 L/min. Connections: 1/2?IG inlet/output and consumer<~cbht/>~1/2?AG to continue printing

Crane winch, auxiliary winch with gear reduction for higher pulling power, the reduction is loosened to be pulled out. The winch is pre-assembled in a metal housing - simply connect it to a double-acting control device.For mounting on cable winches or forwarding wagons, a forestry crane , forwarding tongs or pile shield. Can be used for anything that needs to be pulled.For mounting on winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 1400 kg pulling force at 175 bar,large drum with 40 meters of 6 mm wire rope with hook,The rope speed is 0.45 meters / second at 40 liters/min. Connections: 3/8?AG/IT..

​Crane winch, auxiliary winch with gear reduction for higher pulling force, the reduction is released for pulling out.The winch is pre-assembled in a metal housing - simply connect to a double-acting control unit.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Can be used for anything that needs to be pulled.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Many Kesla and Patu cranes already have the appropriate attachment holes!Max. 1700 kg pulling force at 175 bar,Large drum with 35 m 8 mm wire rope with hook,The rope speed is 0.36 metres / second at 40 l/min.Connections: 3/8 inch AG/IG.

​Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling force. The gear reduction is released for pulling out.The winch is pre-assembled in a metal housing - simply install in a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation,Valve with built-in pressure transfer line and extra return line,max. 50 l/min flow rate, max. 175 bar, connections 1/2 inch female thread, pressure transfer 1/2 inch male thread.Dimensions of the winch housing: 40 x 25 x 20 cm.Can be used for anything that needs to be pulled.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Many Kesla and Patu cranes already have the appropriate attachment holes!Max. 1400 kg pulling force at 175 bar,The rope speed is 0.45 metres / second at 40 l/min.Large drum with 40 m 6 mm wire rope with hook.Complete set with hoses and HY plug,Electro-magnetic valve with professional radio unitpermanently wired with 7-pin vehicle plug.

Crane winch, auxiliary winch with gear reduction for higher pulling power, the reduction is released to be pulled out.The winch is pre-assembled in a metal housing - simply connect it to a double-acting control device.For mounting on cable winches or forwarding wagons, a forestry crane , forwarding tongs or pile shield.Dimensions of the housing: 40 x 25 x 20 cm.Can be used for anything that needs to be pulled.For mounting on winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 2200 kg pulling force at 175 bar,large drum with 35 meters of 8 mm wire rope with hook,The rope speed is 0.36 meters / second at 40 liters/min.Connections: 3/8?AG/ IG.

The light and compact auxiliary winch for mounting on cable winches or forwarding tongs, log splitters or even on a pole blade, ATV or small forwarding vehicle. The winch is pre-assembled on a plate with fasteners that can be easily mounted to your device. This crane winch is a robust construction and made for demanding use in the forest. Simply connect to a double-acting control device. Can be used for anything that needs to be pulled.Compact crane winch - easy and quick assembly.The maximum pulling force is a full 700 kg at a maximum of 175 bar.The rope speed is 1.2 meters / second at 40 liters/min.Connections: 3/8?AG/IG.Dimensions of the winch approx. 24 x 24 x 15 cm, holding plate with 2 x 17 mm holes with 70 mm hole spacing.<~cbht />~Drum: 60 mm inner and 150 mm outer diameter, 50 mm wide.Winch We-700 with bracket and 20 meters of 5 mm wire rope.

Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling power. The reduction is released to pull it out.The winch is pre-assembled in a metal housing - simply install it into a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation, <~cbht />~Valve with built-in pressure transfer and extra return, <~cbht />~max. 40 liters/minute flow, max. 175 bar, connections 1/2?IG, pressure continuation 1/2?AG.<~cbht />~Dimensions of the winch housing: 40 x 25 x 20 cm. Can be used for anything that needs to be pulled.For mounting on cable winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes ! Max.1700 kg pulling force at 175 bar,The rope speed is 0.36 meters / second at 40 liters/min.large drum with 35 meters of 8 mm wire rope with hooks. Complete set with hoses and HY plug, electro-magnetic valve with professional radio unit >Fixed wired with 7-pin car plug.

Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling power. With freewheel for pulling out the rope.The winch is pre-assembled in a metal housing - simply install it into a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation,Valve with built-in pressure transfer and extra return ,max. 40 liters/minute flow, max. 175 bar, connections 1/2 Zoll IG, pressure continuation 1/2 Zoll AG.Dimensions of the winch housing: 40 x 25 x 20 cm.Can be used for everything What needs to be pulled can be used.For mounting on cable winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 2200 kg tensile force at 175 bar,The rope speed is 0.29 meters / second at 40 liters/min.Large drum with 35 meters of 8 mm wire rope with hook.Complete set with hoses and HY plug,electro-magnetic valve withprofessional radio unitwith 7 -pin vehicle plug permanently wired.

The light and compact auxiliary winch with radio control, for installation on cable winches or forwarding tongs, log splitters or even on a pole blade, ATV or small forwarding vehicle. The winch is pre-assembled on a plate with fastening elements that can be easily attached to your device can be mounted.This crane winch is a robust construction and made for demanding use in the forest.It is operated via radio on a 12 V control valve with additional manual operation. Control valve: 12 volts Simply install solenoid valve into a hydraulic circuit<~cbht />~Valve with built-in pressure transfer and extra return,<~cbht />~max. 40 liters/minute flow, max. 175 bar, connections 1/2?IG, pressure continuation 1/2?AG.The maximum tensile force is a full 700 kg at a maximum of 175 bar.The rope speed is 1 .2 meters / second at 40 liters/min.Dimensions of the winch approx. 24 x 24 x 15 cm, holding plate with 2 x 17 mm holes with 70 mm hole spacing.<~cbht />~ Drum: 60 mm inner and 150 mm outer diameter, 50 mm wide.Winch We-700 with bracket and 20 meters of 5 mm wire rope.Can be used for anything that needs to be pulled . Complete set with hoses and HY plug, electro-magnetic valvewithprofessional radio unitwith 7-pin car plug< /strong> permanently wired.

​For easy retrofitting of a radio control system – NO complicated cable connections! All components are permanently wired and easy to install! 2-channel radio device with wired receiver and transmitter with on/off switch and two functions. The input on the receiver is hard-wired with a 7-pin automotive connector and the outputs with a 3-pin DIN plug each.Frequency: ISM 868 / 915 MHzOutputs max. 5 A,Protection class: IP 67.

​PPlug-ready radio set for 12 and 24 volts!For easy retrofitting of a radio control - NO complicated cable connection!All components are pre-wired and easy to install!2-channel radio set with wired receiver and transmitter with on/off switch and two functions. The 2-pole input on the receiver can be connected to 12 V or 24 V and the outputs each with a 3-pin DIN plug. Frequency: ISM 868 / 915 MHz  Outputs max. 5 A, Protection class: IP 68.

in 1 world first! ~The TOOLPROTECT rope runner SL-Green serves as a sliding handle on the rope of rope winches. ~1) It primarily protects the hand from possible injuries caused by rope damage. ~2) At the same time, it protects the rope from damage when it comes into contact with obstacles (e.g. stone) or the rope and the tree from damage when they come into contact when retracting. ~3) In addition, the rope runner gently cushions the end of the rope in the end retraction of the rope winch.  ~Suitable for rope diameters up to max. 14 mm ~and a maximum pulling force of the cable winch of approx. 7 tons.Important: the consent of the manufacturer of the cable winch for the safe installation of this component is a basic requirement for installation!Caution: Risk of injury if incorrectly installed or used!  ~