Pliers

Unsere Angebote

-16 %

#FA127546

Unicraft Battery starter SB 501

Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction

€399.90* €474.00* (15.63% saved)

-8 %

#FA128486

Aircraft Compressed air hose reel DST 8/32 30m rotatable

For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar

€119.90* €129.95* (7.73% saved)

-15 %

#FA124942

Milwaukee Cordless angle grinder 18V FSAG125X loose

Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm

€299.95* €352.80* (14.98% saved)

-14 %

#FA129139

Milwaukee Drill cassette SDS+MX4 7-piece

With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm

€57.95* €67.50* (14.15% saved)

-17 %

#FA61225

Aircraft Holding device f. knife f. 54609

€47.90* €57.90* (17.27% saved)

-23 %

#FA129102

Milwaukee HSS-G 25-piece drill bit cassette Thunderweb

THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.

€99.95* €129.90* (23.06% saved)

-5 %

#FA126047

EINHELL Kompressor TC-AC 420/50/10 V

The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)

€339.90* €358.00* (5.06% saved)

-13 %

#FA127601

Aircraft Mobilboy 261/24T E compressor

Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv

€199.95* €229.90* (13.03% saved)

-42 %

#FA131010

Pro-Compact 5 m tape measure

Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.

€12.95* €22.20* (41.67% saved)

-20 %

#FA128143

Aircraft PSM3 Pro Mini polishing sander

Mini polishing sander - precision in a small formatIdeal for fine polishing and sanding work in hard-to-reach areas. Whether in the workshop, on the car or for DIY projects - the compact mini polishing sander ensures perfect results. Thanks to its handy size and powerful motor, it is versatile and enables precise work even on sensitive surfaces. Included in the scope of delivery: Velcro pad 76 mm, one soft and one hard polishing sponge 90 mm as well as a lambskin polishing pad with 80 mmTechnical data:Average air requirement: approx. 340 l/min Working pressure: 6.3 barConnection thread: ¼” Mounting spindle: M6

€199.95* €249.90* (19.99% saved)

All Products

#FA125298

BGS Rivet nuts and rivet pliers 3-1

Suitable for blind rivets, blind rivet nuts and for sheet metal nibblingwith 2 sheet metal nibbler insertsIncludes 5 interchangeable nose pieces and 6 interchangeable rivet nut pulling mandrelsNo tools required to change the nose pieceslittle effort required thanks to innovative lever technologynarrow pliers headwith rubber handleBody made from special tool steelBlind rivets aluminum: 2.4 - 3.2 - 4.0 - 4.8 - 6.4 mmSteel blind rivets: 2.4 - 3.2 - 4.0 - 4.8 mmRivet nuts: M3 - M4 - M5 - M6 - M8 - M10

€99.95*

#FA124573

Unior Steel wire cutter 584/4BI-RED

These pliers are needed for a straight cut for ropes and bowdens without them becoming unraveled or crushed. With locking mechanism.To unlock, press the pliers handles together and release them. In order to maintain the cutting performance, it is not recommended to use the cutter for other purposes!

€49.95*

#FA130136

Threaded rivet assortment 150 pcs

A 150-piece assortment with threaded rivets made of steel M3X9-M10x21 in a sturdy plastic case

€29.95*

#FA130137

Threaded rivet assortment 150 pcs

A 150-piece assortment with threaded rivets made of aluminum M3x9-M10x21 in a sturdy plastic case

€37.90*

#FA129985

Threaded rivet assortment 300 pcs

A 300-piece assortment with threaded rivets made of steel / aluminum M3X9-M10x21 in a sturdy plastic case

€69.90*

#5724

Gedore Assembly pliers for external security

Length (mm): 170 | Ø: 19-60

Curved tip with spring.

Variants from €22.95*

€25.90*

#5723

Gedore Assembly pliers for external security

Length (mm): 180 | Ø: 19-60

Straight tip with feather.

Variants from €19.95*

€23.50*

#5730

Gedore Assembly pliers for internal security

Length (mm): 140 | Ø: 12-25

Straight tip, without feather.

Variants from €19.95*

€19.95*

#5735

Gedore Assembly pliers for internal security

Length (mm): 220 | Ø: 40-100

Curved tip, without spring.

Variants from €22.50*

€27.95*

#47090

HM MÜLLNER Biting forceps

Pliers length: 225 mm

The “Mono” biting and pinching pliers are an indispensable tool for precise work in trade and industry.They are ideal for cutting nails, wires and other solid materials.With their robust design and hardened cutting edges, they ensure a long service life and reliable performance.The ergonomic handle offers optimum comfort and a secure grip, even during intensive use.Whether for professionals or DIY enthusiasts, the “Mono” pliers impress with their quality and versatility.Perfect for anyone looking for a powerful and precise tool.Chrome vanadium steelPlastic handlesPrecise design

Variants from €9.99*

€11.95*

#FA28472

BGS Blind rivet pliers professional

suitable for rivets made of aluminum, copper and steel, diameters of 2.4 - 3.2 - 4.0 and 4.8mm

€39.95*

#FA14126

Blind rivets 100 pieces.

35 pieces for material thickness 1 - 3, 35 pieces for material thickness 3 - 6, 30 pieces for material thickness 6 - 9.

€13.95*

#122172

Gesipa Blind rivets alu/steel big head 25 pcs

Rivet shank d x l: 4,8 x 17 mm, K 16 | Rivetable material thickness: 6,5 - 13 mm

Rivet made of aluminum with steel rivet mandrel and predetermined breaking mandrel.For universal use, suitable for standard riveting pliers.Large head

Variants from €5.95*

€5.99*

#FA26401

Gedore Circlip pliers set

4 pieces, chrome vanadium, painted black, with color-dipped handle protection, for inside and outside circlips.

€79.99*

#FA133571

Tecwerk Circlip pliers set, 4-piece

Contents: 1 straight retaining ring pliers for inner rings (Part No. 2000 810 590) 1 90° angled retaining ring pliers for inner rings (Part No. 2000 810 607) 1 pc. Retaining ring pliers for outer rings, straight (Item No. 2000 810 614) 1 pc. Retaining ring pliers for outer rings, 90° angled (Item No. 2000 810 628) Supplied in a high-quality roll-up pouch made of durable polyester fabric, drawstring closure

€57.90*

-20 %

#FA134346

Knipex Cobra XXL water pump pliers

Robust pipe and water pump pliers for pipes up to 4 1/2 inches.Clamping range 120 mm – adjustable to the workpiece in seconds with a push button.Self-locking, HRC61-forged and hardened teeth for a secure grip.Overall length 560 mm, handle with plastic coating for a good grip during heavy-duty use.

€119.95* €149.90* (19.98% saved)

#FA47081

Combination pliers 180mm

Versatile: The Mllner combination pliers 180mm are a must for every toolbox. ~They are ideal not only for professional craftsmen, but also for DIY projects at home. ~No matter whether you are in Whether you're working on electrics, repairing furniture or screwing on your bike, these pliers reliably support you in your work. Versatile application: for cutting, gripping, bending and holding. Whether you need to cut wires, hold objects or bend materials, this tool makes every task easier.Chrome vanadium steel, satin-finished headStrong-walled multi-component plastic handleUniversally applicable Grip surfaces with cut for good grip

€9.99*

#FA68588

Gedore Combination pliers angled

Innovative novelty. Thanks to the 60 angle, ideal visibility, good power transmission and optimal suitability for all (holding) work. In proven Gedore - industrial quality.

€35.90*

#FA131968

Gedore Combination pliers Multi Ged.Red 220mm

Universal combination pliers for gripping, cutting wire up to 2 mm in diameter, and crimping 0.5–2.5 mm² cables. Ergonomic 2-K handle. Total length 220 mm. One for everything!

€11.95*

#FA6279

Tecwerk Continuous scissors professional

German product, straight, length 275 mm.

€37.90*

-33 %

#FA29420

Control pliers L145mm Hole Ø 3mm

for punching test badgesgalvanized

€79.95* €119.95* (33.35% saved)

#131925

Tecwerk Corner pipe wrench 1 1/2 inch

Inch: 3 | Length (mm): 620 | Span (mm): 0-103

High-quality pipe wrench made of chrome vanadium steel, drop-forged, painted blue, polished, adjusting nut lock, pliers mouth inductively hardened ~Total length 420mm, for pipes up to 1 1/2 inches.

Variants from €39.95*

€89.95*

#FA43769

Tecwerk Corner pipe wrench 330mm

Total length 330 mm Span 0-45 mm for pipes 1 inch S-jaw Chrome vanadium steel drop forged painted blue, polished Locking nut lock Plier jaw inductively hardened Other technical properties Material: chrome vanadium Steel Model: S-mouth

€26.95*

#FA47548

Tecwerk Corner pipe wrench total length 535 mm, span 0-75 mm

Total length 535 mm Span 0-75 mm for pipes 2 inchesS-jaw Chrome vanadium steel drop-forged painted blue, polished Locking nut lock Plier jaw inductively hardened Other technical properties Material: chrome vanadium Steel Model: S-mouth

€54.95*

Seite 1 von 3

Our product manager

Bernhard Schuster

Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Pliers

Side cutters & pliers

Pipe and water pump pliers

Combination pliers

Special pliers & accessories

Circlip pliers

All Products

Our product manager

Bernhard Schuster

€10 voucher.