Side cutters & pliers

Unsere Angebote

-16 %

#FA127546

Unicraft Battery starter SB 501

Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction

€399.90* €474.00* (15.63% saved)

-8 %

#FA128486

Aircraft Compressed air hose reel DST 8/32 30m rotatable

For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar

€119.90* €129.95* (7.73% saved)

-15 %

#FA124942

Milwaukee Cordless angle grinder 18V FSAG125X loose

Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm

€299.95* €352.80* (14.98% saved)

-14 %

#FA129139

Milwaukee Drill cassette SDS+MX4 7-piece

With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm

€57.95* €67.50* (14.15% saved)

-17 %

#FA61225

Aircraft Holding device f. knife f. 54609

€47.90* €57.90* (17.27% saved)

-23 %

#FA129102

Milwaukee HSS-G 25-piece drill bit cassette Thunderweb

THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.

€99.95* €129.90* (23.06% saved)

to the product

-5 %

#FA126047

EINHELL Kompressor TC-AC 420/50/10 V

The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)

€339.90* €358.00* (5.06% saved)

to the product

-13 %

#FA127601

Aircraft Mobilboy 261/24T E compressor

Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv

€199.95* €229.90* (13.03% saved)

-42 %

#FA131010

Pro-Compact 5 m tape measure

Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.

€12.95* €22.20* (41.67% saved)

-20 %

#FA128143

Aircraft PSM3 Pro Mini polishing sander

Mini polishing sander - precision in a small formatIdeal for fine polishing and sanding work in hard-to-reach areas. Whether in the workshop, on the car or for DIY projects - the compact mini polishing sander ensures perfect results. Thanks to its handy size and powerful motor, it is versatile and enables precise work even on sensitive surfaces. Included in the scope of delivery: Velcro pad 76 mm, one soft and one hard polishing sponge 90 mm as well as a lambskin polishing pad with 80 mmTechnical data:Average air requirement: approx. 340 l/min Working pressure: 6.3 barConnection thread: ¼” Mounting spindle: M6

€199.95* €249.90* (19.99% saved)

All Products

#47090

HM MÜLLNER Biting forceps

Pliers length: 225 mm

The “Mono” biting and pinching pliers are an indispensable tool for precise work in trade and industry.They are ideal for cutting nails, wires and other solid materials.With their robust design and hardened cutting edges, they ensure a long service life and reliable performance.The ergonomic handle offers optimum comfort and a secure grip, even during intensive use.Whether for professionals or DIY enthusiasts, the “Mono” pliers impress with their quality and versatility.Perfect for anyone looking for a powerful and precise tool.Chrome vanadium steelPlastic handlesPrecise design

Variants from €9.99*

€11.95*

#FA92283

Tecwerk Pliers set 6 pieces. in a plastic case

Pliers chrome-plated ~ ~with multi-component sleevesContents:1 radio/telephone pliers 200 mm, straight1 radio/telephone pliers 200 mm, curved 1 piece side cutter 160 mm, for piano wire1 piece power side cutter 180 mm1 piece power combination pliers 200 mm1 piece water pump pliers 240 mm, through joint

€129.95*

#FA47963

Gedore Pliers set, 3 pieces.

Practical set consisting of universal pliers 142 10 TL, power combination pliers 8250-200 JC and power side cutters 8314-180 JC, Swedish model.

€79.95*

#FA113362

Unior Power side cutter 250mm Power Shark

Particularly powerful cutting pliers for cutting metal wire (including hardened and tempered alloys). The ergonomic shape and length allow maximum force to be applied while still being comfortable in the hand. With non-slip 2K handles, forged design. Also cuts nails, bolts and screws (up to 4mm). Premium design, even for the toughest applications.

€39.95*

#FA105797

Gedore Power side cutters 180mm 2-component

According to DIN ISO 5749, large leverage for easy cutting, inductively hardened precision cutting, cutting edge hardness 63 - 65 HRC, for hard wire/piano wire - see table for values, max. cutting capacity 1.4 - 2.0 mm, GEDORE special tempered steel, drop-forged, oil-hardened and tempered, JC = chrome-plated, with 2-component handle covers, TL = steel gray, with blue-dipped anti-slip handles.

€42.50*

#FA47086

Side cutter 180mm

An indispensable companion for precise cutting work in the workshop and household. ~This side cutter combines functionality with durability and is specially designed for cutting wires, cables and other materials. ~Ideal for electricians, DIY enthusiasts and craftsmen who value precision and reliability. ~Precise cutting performance, the Mllner side cutter 180mm has been developed with sharp cutting edges to ensure clean and precise cutting. ~No matter whether you If you need to cut through soft wires or harder materials, these side cutters deliver excellent results.Chrome vanadium steel, satin-finished headStrong-walled multi-component plastic handlealso suitable for hard wire

€9.99*

#16152

Gedore Side cutters

Length (mm): 200

Made of hot-forged tempered steel. Surface painted black with blue-dipped protective handle cover.

Variants from €29.95*

€37.95*

#FA131969

Gedore Side cutters Multi Ged.Red 200mm

Powerful side cutters for wire diameters up to 2 mm. The pliers also have a crimping function for 0.5–2.5 mm² cables and a stripping function for 1–2.6 mm. Total length: 200 mm.

€11.95*

Our product manager

Bernhard Schuster

Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.