Drinking trough

Made of brass with pressure cap. Suitable for the G16 drinking bowl (order no. 28957), cast iron drinking bowl (order no. 14720), and S1 basin (order no. 8505 and 32483).

Without seal, suitable for Suevia Mod. 115 Suevia spare part number 102.0278

Made of stainless steel, for mounting on tubs or similar containers. Complete with float valve and protective housing. Ideal for pasture or playpen. Includes 2 nozzles (2 mm and 3.5 mm) for low or normal pressure (1-4 bar). Flow rate depending on nozzle setting and pressure from approx. 1.5 to 11.2 l/min. Connection 1/2". (LxWxH): 18.5 x 8.2 x 6 cm. Total height including attachment: 11.2 cm.

Made of stainless steel. Very practical for mounting on tubs and long drinkers, even on existing ones. Can be hung up to a width of approx. 7 cm. With high-performance valve, water output of up to 28 l/min, therefore ideal for large groups of animals. Complete with stainless steel brackets and two 1/2? water connections. (LxWxH): 25 x 10 x 10 cm.

Pressure tongue made of gray cast iron, large drinking bowl made of gray cast iron! High-quality powder coating, water connection 1/2" from above or below, weight 4.5 kg, suitable for wall and pipe mounting.Tongue can be locked!

Solid, ~enamelled ~gray cast iron body with a particularly large and deep bowl (bowl diameter 225 mm, bowl volume 2 liters). Connection options from above and below G1/2" internal thread. High-quality brass valve with infinitely variable adjustment options for different water pipe pressure (from 7.5 - 11 l/min. at 3 bar), weight 7.4 kg, suitable for wall and pipe mounting.

Large drinking bowl made of gray cast iron, high-quality, enamelled surface, easy-to-clean bowl shape, bowl volume 1.3 liters, water connection 1/2" from top and bottom, suitable for wall and pipe mounting, pipe valve made of brass , flow rate 8 liters/min at 3 bar line pressure.

Drinking basins for cattle, calves and horses. 4-hole attachment, quiet water flow, no splashing. Bowl made of cast iron, enameled. Very good value for money, 1/2" connection.

Particularly smooth-running sheep drinker, can also be used as a corner drinker. With flow regulation, 1/2 connection, for sheep and calves. Brass valve

Heatable cast iron drinking bowl with float for sheep, goats, pigs and dogs.Frost-proof down to -20°C40 W / 24 V integrated heating elementIntegrated thermostatCast iron bowl, plastic-coatedFloat valve for constant water level up to max. 5 barDrain plug for easy emptying and cleaning1/2" connection left or rightAttention: Transformer required (not included)

​Heated cast iron drinking trough with float for sheep, goats, pigs, and dogs.Frost-proof down to -20°C40 W / 24 V integrated heating elementIntegrated thermostatCast iron bowl, plastic-coatedFloat valve for constant water level up to max. 5 barDrain plug for easy emptying and cleaning1/2" connection, left or rightNote: Transformer required (not included)B-stock returns

Circulation heater including circulation pump with integrated heating element for year-round operationThe ideal solution for supplying animals with tempered water.The constant water movement and the switchable heating offer double protection against freezing .3-stage switching: 0 = off, 1 = circulation mode, 2 = circulation and heating modeautomatic control of the set water temperatureautomatic safety shutdown in the event of overheating Quick vent valve on the radiator Easy installation by authorized specialists Low space requirement due to compact design Very maintenance-friendly Components can be quickly disconnected and dismantledFor drinking systems with a ring pipe length of max. 250 m (with pipe diameter 3/4?)Housing made of stainless steelCirculation pump with three different speed levels Technical data:- 230 V- power circulation pump 50 W- power heating element 3,000 W- water connection 1? (input + output)- water pressure max. 5 bar - Dimensions 520 x 410 x 285 mm (LxWxH) - Weight 6.7 kg - Protection class IPX4D - Temperature controller +5 - +35C - Factory setting +5 on +15C off ~Scope of delivery: ~< /strong>Circulation pump, flow pipe with integrated heating element, check valve, quick vent, pressure relief valve, pump screw connection G 1 "- Rp. 1" for circulation pump. ~PLEASE NOTE:The branch lines should be frost-free using heating cables be kept!The installation location of the pump should be protected from wind, weather and frost!Make sure that the pipeline is sufficiently insulated (20 mm) and avoid strong bends!It is recommended to have a pressure equalization vessel with a flow through it of the ring main to be installed in a frost-proof area (designed by a specialist installer, not included in delivery).With a 3/4? pipe diameter, up to 250 m of ring main is possible. Flow indicator and thermometer available as optional accessories ~ ~

Heating element suitable for circulation pump / circulation heater C10.

Suitable for trough drinkers TW 30 N, TW 30 HD and TW 30 WN (order no. 72347, 24901 and 99067). Price/piece

Suitable for the Quelle drinking bowls. Made of cast iron. Weight approx. 3 kg

​Compact float valve for water heaters. Suitable for a water pressure of 1-5 bar. Water output approx. 20 litres/min at 5 bar. Connection 1/2’ eyelet thread from above.Height 135 mmWidth 130 mmDepth 80 mm

​1/2" male threadCompatible with Suevia models 560, 590, 5701, 5702, 5703, 5711, 5712, 5713Suevia Original Spare Part Number 131.0820 (replaces Float Mod. 671 Suevia No. 131.0671)

​Stainless steel. Fits Suevia models 1200-VA and 46-VA.Suevia original spare part number 102.1259

For connection to a water tank. This means you can connect a low-pressure drinker, for example, using a hose. Connection 10 mm, at the thickest point (nut) 24 mm. Total length approx. 58 mm.

For connecting a drinking bowl to an IBC tank. including flexible armored hose 70 cm.Scope of delivery:1 x armored hose 70 cm (connection 2 x 3/4" female thread)1 x adapter for IBC container incl. seal (S60x6 to 3/4" male)1 x reduction straight 3/4" male to 1/2" female 1 x double nipple 1/2" male to 1/2 "AG1 x double nipple 3/4AG x 3/4AG

Cover cap Fits Suevia model 41A Suevia original spare part number 102.0490

​Compatible with Suevia float valve model 580 and waterers models 43, 560, 590, 5701, 5702, 5703, 5711, 5712, 5713Suevia Original Replacement Part Number 102.0649

​Set consisting of 2 galvanized U-bolts with washer and nut as well as 2 castings. For pipe Ø 11/4“ - 2”.Suitable for Suevia drinking bowls mod. 25R and 115

​Compatible with stainless steel drinking bowlsLister original spare part number 04-0080330