Drinking trough

Drinking bowl made of stainless steel, pipe valve and sturdy cast body. Ideal for dairy cows, as there is a large water flow!Extra large and wide bowl ( 27 cm, height 12 cm) with 5 liter capacity. ~Stainless stainless steel< /b>  ~Ensures optimal water hygiene, 4-point attachment to wall or pipe (mounting material not included). Connection possible from above or below.

​Made of rubber, 10 x 4 mm.Fits Lister drinking bowls SB112 / SB113Lister original spare part number 090061072

​Suitable for all drinking bowls and trough drinkers with 24 V heatingtransforms the voltage from 230 V to 24 VShort-circuit and overload protection thanks to easily replaceable miniature fuse in the output circuitIntegrated self-resetting temperature limiter to protect against overheatingProtection class IP44 - When connecting the 230 V plug in an appropriate protective box: IP54Fully encapsulated housing: best possible protection against moisture, mechanical and electronic loadsWhich transformer is right for me?There are several things to consider when selecting a transformer: Drinking trough heating output, heating cable output and safety buffer.Example:2 drinking troughs with a heating capacity a'100 watts = 200 watts, 2 frost protection heating cables 1.5m a' 15 watts = 30 watts, 15 % safety buffer = 35 watts-> required transformer 300 watts

​suitable for Suevia Mod. 25R, 46, 370, 1100, 1200, 1200P, etc.Suevia original spare part number 102.1039Attention: Please check which basin version is in use (older versions had 1/2” connections - see article 128655)

​Pack of 10Compatible with Suevia Model 15Suevia Original Replacement Part Number 102.0155

​Brass adjusting screw, compatible with Lister ST7 bite drinkerLister original spare part number 09-0105010 (No. 10 on the spare parts diagram)

​Adjusting screw suitable for drinking trough SB22Lister Original spare part number 09-1095116

Suitable for Kerbl drinking troughs K75, H10, HP20

Suitable for Alllweiler K/2 and L/5 drinking bowls, 8 mm, made of stainless steel. including nuts

Aluminum foil/adhesive tape for heat reflection on the water pipe. For a 3.5 m long 3/4? pipe, approx. 25 m of aluminum adhesive tape is required ~Tip: For plastic pipes you always need aluminum adhesive tape, otherwise none will be used Heat conduction!!!

Made of plastic, 1/2? external thread.

​Low-pressure grazing barrel mounted drinking basin for cattle and horses made of UV-resistant AQUATHAN plastic. With mounting flange for direct attachment to grazing barrels. Smooth-running valve tongue. Incl. flange seal. Suitable for cattle and horses

​For fattening pigs weighing 15-120 kgThe stainless steel feed intake mechanism simulates the animals' natural rooting behaviorMade of high-strength polypropyleneFeed flap and bite guard made of stainless steelEasy to use and easy to cleanCapacity: 60 litersPrecise feed dosing with 13 adjustment optionsIdeal for roughage feedingWater supply can be installed on both sides (1/2" external thread connection)Nipple drinker easily accessible even for small pigletsThe wet/dry system stimulates appetiteHeight: 107 cm, Diameter: 37 cm

​With the universal plastic suspension float valve, an automatic drinking trough can be built from almost any container with little effort. The float valve is covered by a plastic housing and therefore protected. The mounting bracket is made of stainless steel. It can be easily fixed in place using the wing screw. The fill level can be infinitely adjusted using the “PEKI” float valve. Weight approx. 1 kg. Filling capacity 8 l/min at 3 bar. Max. Max. line pressure 8 bar. Connection thread 1/2” external thread. 200x95x100 mm (LxWxH)

​suitable for Suevia Mod. 41ASuevia original spare part number 102.1512

​Set including 2 stop nuts.Fits Suevia models 15 and 115.Suevia original spare part number 102.0157

Suitable for the S1 drinking bowl (order no. 8505 and 32483)

Stainless steel version with brass threaded piece. The original AquaGlobe teething nipples are characterized by the following advantages: up to 40% less water wastage hygienic anatomically shaped excellent quality and durability should be installed horizontally (at the level of the snout) or inclined by 15Size: for sows or cattle up to 300 kg, length 97 mm, connection 3/4"-3/4" Less water wasted: The animal has to put the entire drinker in its mouth to activate the ball valve. This prevents the water play that occurs with conventional nipples. Because you use less water, you also save costs for manure storage and recycling. Hygienic: There are no nooks and crannies where bacteria could collect. In addition, the ball cleans itself through the rotating movement. AquaGlobe guarantees maximum hygiene. Anatomical shape: The special shape of the teething nipples (round with a flattened water opening) and the use of a movable ball as a valve and its placement make it easier for the animal to drink.

​Suitable for Suevia Model 1200 drinking troughSuevia Original Spare Part Number 102.1101

​Suitable for Suevia Model 115Pack of 10Suevia original spare part number 102.0275

​Brass bearing screw, compatible with Lister ST7 bite watererLister original spare part number 09-0105003 (No. 3 on the spare parts diagram)

Robust, galvanized pipe protection for water pipes and heating cables. (L x W x D): 100 x 11 x 8 cm~ Thickness: 1.5mm

​Suitable for Lister drinking troughs SB112 / SB113Lister original spare part number 090061057

​The brass float valve “open type” is ideal for the make-up of any type of construction. Thanks to the large valve bore and its simple mechanical control, it can also be operated without pressure.Technical datamax. temperature 70°C.Max. line pressure 8/6 bar (3/4 or 1")Overall length 350/455 mm (3/4 or 1")Float ball 120/150 mm (3/4 or 1")