Drinking trough

For hand drinks designed for low pressure. Float pot, complete set with a spout, straight version. Complete with pot, lid, float valve and ball, ~hose connection 1/2" and 3/4" (hose nozzle), locknut 1/2", screw plug 1/2", seal for 1/2" 2", Water connection 1/2" AG. (LxWxH) approx. 35 x 19 x 20 cm. Contents 7 litres

Sealing kit consisting of plastic sealing piston and seal. Suitable for “PEKI” float valves

Suitable for pasture pump item 123765. Consisting of float ball ( 145 mm) with retaining eyelets, suction basket 1", hose connection 1".The float ball prevents the suction basket from sinking into the mud. The suction basket floats approx. 15 cm below the water surface

​suitable for Suevia Mod. 130P, 340, 350, 509Suevia original spare part number 102.1755 (successor to 102.0504)

Universal float valve. Connection 3/4" male thread. Suitable for low and high pressure up to max. 14 bar. Water flow: 54 l/min at 5 bar, 41 l/min at 3 bar, 24 l/min at 1 bar

suitable for Kerbl trough and tipping troughs. Connection 1/2" AG

​For installation in tubs and troughs. 3/4" male thread connection.Up to 5 bar water pressure. Water flow up to 40 l/min. Brass valve. Stainless steel nozzle.Suevia Original Spare Part Number 131.0723

Complete float valve suitable for Lister SB112/113 drinking bowls and TW30HD trough drinkers. Operating pressure range 3-5 bar.Lister original spare part number 09-0050754

​Suitable for Suevia flat swivel troughsSuevia original spare part number 131.0692

​Compatible with Lister SB113 drinking troughLister original spare part number 09-0076000

​Compatible with Lister SB112 drinking troughLister original spare part number 09-0061300

Suitable for high and low pressure 0-6 bar. 16 liters. 395 x 400 x 340 mm.Made of sturdy, impact-resistant polyethylene, smooth surface and a curved design specifically for animal safety. The drinker has a raised valve housing and is equipped with a PVA float valve with ½" connection (male thread) made of brass, which can deliver 30 l/min at 3 bar pressure. The large volume makes this drinker ideal for larger animals or groups of small animals. The built-in drain allows for quick and easy cleaning.  

Suitable for low pressure up to 0.5 bar. 4 liters. 330 x 254 x 228 mm. Made of sturdy, double-walled polyethylene, shock-resistant, smooth surface and curved design, specially developed for animal safety. PVA float valve with ½" connection (male thread). The integrated drainage system allows for quick and easy cleaning.

Suitable for high pressure up to 8 bar. 4 litres. 330 x 254 x 228 mm. Made of robust, double-walled, impact-resistant polyethylene, smooth surface and a curved design specifically for animal safety. PVA float valve with ½" connection (male thread). The built-in drain allows for quick and easy cleaning.  

​With float. DN25, 1” external thread. Suitable for circulation pump C10

​Frost monitor specially developed for use in harsh environments with splash-proof Schuko plug and coupling (IP44). The temperature range used closes the circuit with a single pole when temperatures fall to just above freezing point at approx. 3°C and opens when temperatures rise above 8°C. The cable has no power consumption!Total length 100 cmApplication:For connecting appliances which should only be switched on when there is a risk of frost and which no longer need to be operated when temperatures rise.Application examples:Heated watering troughs in agriculture (also for switching off the transformer)Infrared heat lamps (e.g. in calf igloos, calf pens, chicken coops, etc.)Frost monitor heaters in the house or garageConstruction site heatersGreenhouse heatersTechnical datamax. load: 1,000 wattsmax. current: 5 ASwitch-on temperature: 3°CSwitch-off temperature: 8°C (at 1,000 W)Degree of protection: IP68 for sensor housing, IP44 for plug and couplingCable: rubber cable 3x1.5 mm²Translated with www.DeepL.com/Translator (free version)

?to heat the branch line of drinking troughsa 24 V transformer is required for operation Heating cable frost-proof down to -45C< /ul>

Keeps your water pipe frost-free up to a maximum of -45 C! Integrated frost protection thermostat (switch-on temperature approx. +5 C, switch-off temperature approx. +13 C), not suitable for heating pipes, if there is additional insulation, do not insulate the thermostat. IPX7, VDE tested.What should you pay attention to with 230 V heating cables:The water pipe must be groundedthe 230 V-heating cables are ready to plug in and can be connected to a power supply with a circuit breaker (FI switch 30 mA).The heating cables must not be shortened and should therefore be ordered in the correct length Remaining lengths can be wrapped around the pipe in turns (note that a distance between turns of at least 15 mm must be maintained) Do not kink the heating cable and keep the maximum bending radius of approx . Observe 50 mmThe heating cables can be attached to the pipe with insulating tape or carefully with cable tiesWhen used on plastic pipes, the pipe must be covered with aluminum adhesive foil (e.g . B. 120087)The pipe and the heating cable should be insulated with a maximum insulation of 13 mmThe thermostat of the heating cable (always 2m away from the plug) should be on in the coldest position of the pipe The thermostat should be kept clear of the insulationDo not use 230 V heating cables in the browsing area of animals the installation Must be carried out by a qualified specialist in accordance with VDE0100 Power: 16 W / meterDo not install unprotected in the area where the animals are browsing - use here only 24 volt heating cable! Heating cable must not be shortened!

Original Suevia! For heating the branch line made of galvanized pipe or suitable plastic. Plastic cables must be wrapped with aluminum adhesive tape.24 V, 20 W, 2 m length.

Suitable for all pool and pipe heating systems, external probe ensures automatic switching on and off.IP 54, in a splash-proof housing. Max. permitted power 3.6 kW.Advantages:the frost protection installation is not switched on when there is no risk of frostthe thermostat automatically switches the frost protection elements off or on< /li>The response temperature is freely adjustable The frost protection thermostat should be installed in the coldest place.

​The water barrel always provides your animals with fresh water in the pasture. The entire steel water barrel chassis is hot-dip galvanized for a long service life!The barrel is supplied fully assembled on wooden skids and can therefore be loaded or mounted on an existing chassis at any time.Delivery without drinking basin! (see accessories)

The water barrel trolley always provides your animals with fresh water in the pasture.The entire trolley including barrel and chassis is hot-dip galvanized for a long service life!Product details:Ball head trailer coupling up to 25 km/hPneumatic tiresSupport wheellightingSupplied without drinking trough and rear support! (see accessories)

Suitable for all water barrels, drinking bowl made of corrosion-resistant cast aluminum, complete with flange seal, pressure tongue made of stainless steel, complete with low-pressure valve.

Heatable cast iron drinking bowl with float for cattle, horses, sheep, goats, pigs and dogs.frost-proof down to -20C80 W / 24 V heating element integrated< /li>Sufficient for 15-20 animalsCast iron bowl, white enamelled inside Easy regulation of the water level Water flow up to 5 l/ min. Attention: Due to the float valve, the water pressure must not exceed 5 bar!