Drinking trough

Pools for cattle, cows, bulls, horses, pigs. Made of cast iron, white enamelled inside.Frostproof up to -25C. With smooth-running pressure tongue, non-return valve with a large water inlet of up to 15 l/min. Easily adjust the amount of water to the existing water pressure by replacing the 4 nozzles provided. Can be used up to a maximum of 6 bar water pressure. The valve closes slowly against the water pressure, avoiding shocks in the water pipe. Reliable function even with iron-containing or aggressive water. 24 V, 80 W heating element integrated. Price without transformer!

Heatable drinking bowl (24 V, 80 W) with smooth-running pipe valve for wall and pipe mounting. Frost-proof up to -15C. The remaining water in the bowl cannot freeze. Drinking bowl made of cast iron, entirely enamelled, one drinker is sufficient for 15 - 20 animals. The heating element is mounted between the drinking bowl and the lower bowl, inaccessible to the animals but still accessible in just a few steps. Pipe valve made of brass (3/4"), connection female from above and male from below, water quantity infinitely adjustable from the outside using a regulating screw. Heating coil with 24 V, 80 W, with low power consumption. Installation on the wall or on a 2" - 3 post " possible.

?Drinking tub made of stainless steel Water connection from left or right 3/4"Water flow 45 l/min at 5 bar / 41 l/min at 3 bar With electric heating 24 volts 200 watts Galvanized wall bracket and base frame Large drain opening and inclined tub base enable the water to drain quickly and the tub to self-clean < li>Expansion sealing plug for quick opening and closing of the drainDrain connection suitable for KG pipe DN 100with 3/4" high-performance float valveEasy to close valve cover openOperation with transformer (not included in delivery!)Valve XtraFlo with 250 l/min at 3 bar optionally available with heating, frost-proof down to approx. -15 CDimensionstrough drinker 100 cm: external dimensions with wall bracket 117 x 60 x 64 cm (LxWxH), external dimensions with base frame 122 x 58 x 102 cm (LxWxH)Trough drinker 190 cm: External dimensions with wall bracket 207 x 60 x 64 cm (LxWxH), external dimensions with base frame 212 x 58 x 102 cm (LxWxH)

Heatable drinking bowl with pipe valve, with heating output approx. 80 W, 24 V. Drinking bowl made of high-quality gray cast iron, black enamelled. Gray cast iron lower shell, black powder-coated. Water flow can be regulated at the pipe valve. New heating concept with valve heating to keep it frost-free. Easy to assemble basin, no need to remove valve for installation. Power supply via transformer at least 100 watts (not included in delivery!). Connection options from above and below G1/2" internal thread. Weight 11.5 kg, basin volume 1.6 liters, suitable for pipe and wall mounting, suitable for circulation heating systems, easy power connection through external terminal box. Frostproof up to approx. -20 C!

With pipe trace heating (RBH)230 volts / 66 watts (frost protection up to approx. -25C). Plastic drinking bowls for horses, cattle and sheep. Float valve suitable for domestic and well water. Animal-friendly drinker without pressure tongue, very robust and bite-proof. Adjustment of the valve to the local water pressure via two additional valve nozzles (included). Also suitable for low pressure. With pipe heating cable for heating the drinking bowl, the valve and up to 2 meters of pipe (min. 1 meter, max. 2 meters). The integrated frost protection thermostat switches the cable on at approx. +5C and off again at approx. +15C. No transformer required!Width: 240 mmThrow: 340 mmHole spacing: 100/180 mmConnection: R 1/2 external thread from aboveWater output: approx. 6.2 l/min. at 1-3 barPool volume: approx. 2.3 lWeight: approx. 1.7 kg

With heating cable24 volts / 45 watts (frost protection up to approx. -25C). Plastic drinking bowls for horses, cattle and sheep. Float valve suitable for domestic and well water. Animal-friendly drinker without pressure tongue, very robust and bite-proof. Adjustment of the valve to the local water pressure via two additional valve nozzles (included). Also suitable for low pressure. With heating cable for heating the drinking bowl and the valve. The integrated frost protection thermostat switches the cable on at approx. +5C and off again at approx. +15C. Additional T-piece for mounting on a circulation system. Suitable for circulation systems! Transformer required (not included in delivery!)Width: 240 mmThrow: 340 mm Hole spacing: 100/180 mmConnection:R 3/4 external thread from aboveWater output: approx. 7.2 l/min. at 1-3 barPool volume: approx. 2.3 lWeight: approx. 1.7 kg

With heating cable230 volts / 45 watts (frost protection up to approx. -30C). Plastic drinking bowls for horses and cattle. With reinforcement bead on the edge of the pool. Guaranteed to be dimensionally stable and bite-proof. Pressure tongue with stop device. Plastic valve with high water output. Water connection from above and below or direct connection to horizontally laid water pipes (only with additionally available accessories!). With heating cable for heating the drinking bowl and the valve. The integrated frost protection thermostat switches the cable on at approx. +5C and off again at approx. +15C. Suitable for circulation systems! No transformer required!Width: 220 mmThrow: 280 mmHole spacing: 100 mm Connection: R 1/2" internal thread from top and bottom Water output: approx. 19.6 l/min. at 5 bar Pool volume: approx. 1.0 l Weight: approx. 1 kg

With pipe trace heating (RBH)230 volts / 66 watts (frost protection up to approx. -30C). Plastic drinking bowls for horses and cattle. With a reinforcing bead on the edge of the pool, guaranteed dimensionally stable and bite-proof. Pressure tongue with shut-off device, plastic valve with high water output. Water connection from above and below or direct connection to horizontally laid water pipes possible (only with additionally available accessories!). ~With pipe trace heating cable (RBH) for heating the drinking bowl, the valve and up to 2 meters of pipe (min. 1 meter, max. 2 meters). ~The integrated frost protection thermostat switches the cable on at approx. +5C and off again at approx. +15C. Suitable for circulation systems! No transformer required!Width: 220 mmThrow: 280 mmHole spacing: 100 mm Connection: R 1/2" internal thread from top and bottom Water output: approx. 19.6 l/min. at 5 bar Pool volume: approx. 1.0 l Weight: approx. 1 kg

With heating cable230 volts / 45 watts (frost protection up to approx. -35C). Plastic drinking bowls for horses and cattle. Extra large drinking bowl made of bite-proof, robust plastic. Smooth-running pendulum valve with water regulating screw made entirely of brass. Simplified cleaning thanks to the removable plastic stopper in the middle of the drinking bowl. With heating cable for heating the drinking bowl and the valve. The integrated frost protection thermostat switches the cable on at approx. +5C and off again at approx. +15C. Suitable for circulation systems! No transformer required!Width: 257 mmThrow: 305 mmHole spacing: 136 x 100 mmConnection: R 1/2 internal thread from top and bottomFastening: according to DIN 11840 B136Water output: approx. 11 l/min. at 5 barPool volume: approx. 2.0 lWeight: approx. 2 kg

With pipe trace heating (RBH)230 volts / 66 watts (frost protection up to approx. -35C). Plastic drinking bowls for horses and cattle. Extra large drinking bowl made of bite-proof, robust plastic. Smooth-running pendulum valve with water regulating screw made entirely of brass. Simplified cleaning thanks to the removable plastic stopper in the middle of the drinking bowl. With pipe heating cable (RBH) for heating the drinking bowl, the valve and up to 2 meters of pipe (min. 1 meter, max. 2 meters). The integrated frost protection thermostat switches the cable on at approx. +5C and off again at approx. +15C. Suitable for circulation systems! No transformer required!Width: 257 mmThrow: 305 mmHole spacing: 136 x 100 mmConnection: R 1/2 internal thread from top and bottomFastening: according to DIN 11840 B136Water output: approx. 11 l/min. at 5 barPool volume: approx. 2.0 lWeight: approx. 2 kg

​Plastic heating cable cover for Lister SB22 drinking troughLister original spare part number 01-1096702

Heating cable suitable for drinking trough SH30 - 230 V (order no. 105467)

​Suitable for Lister SB112 H 24-volt/45-watt drinking troughs. Includes plastic heating cable cover.Lister original spare part number 00-0075184

​​Fits Lister SB112 RBH drinking troughs, 230 volts/66 watts. Includes plastic heating cable cover.Lister original spare part number 00-0075154

​​​Suitable for Lister SB2 H drinking troughs, 230 volts/45 watts.Lister original spare part number 01-1096235

​​​Fits Lister SB22 H drinking troughs, 230 volts/45 watts. Includes plastic heating cable cover.Lister original spare part number 01-1096735

​​Fits Lister SB22 RBH drinking troughs, 230 volts/66 watts. Includes plastic heating cable cover.Lister original spare part number 01-1096737

​suitable for Suevia Mod. 41A, 43A, 46 (up to BJ 03/2012)Suevia original spare part number 102.0402

​with luster terminalsuitable for Suevia Mod. 46Suevia original spare part number 102.0671

Total length 20 cm, with 1/2"~ Brass connection, water flow 7.5 l/min at 2 - 3 bar.

​Compact plastic fast-fill valve with extra high flow rate. The TOPAZ float valve stands for a high flow rate (FastFill) and enables extra high filling capacities of up to 270 l/min thanks to its diaphragm operating principle. It can be installed above or below the water surface. It should be emphasized that the valve closes slowly in order to avoid any backflow onto the water pipe and pumps.The quick-fill valve fills at full flow up to the highest level. All valves are made of high-quality ABS or nylon plastics and always complete with float.Overall length 270 mm. Weight approx. 530 g. Max. Temperature 60°C. Max. Line pressure 0.3 - 7 bar

Galvanized, with lock. Suitable for most common pool drinkers. Hole spacing horizontally 8.5 cm, vertically 4 cm. Diagonal hole spacing approx. 9.3 cm.

Hose nozzle 15 mm made of stainless steel. 1/2’ internal thread. With seal.

Hose nozzle 15 mm made of stainless steel. 1/2’ external thread