Pliers
Unsere Angebote
Stihl ALLPRO – Next-level power for professional versatility The STIHL AP 300.0 P battery, with 36 V and 333 Wh, delivers consistent performance for professional gardening, landscaping and forestry-related work. The tabless cell technology supports efficient energy flow, whilst Power Boost automatically provides additional power for demanding applications. 80% charge in 9 minutes with the STIHL AL 1802 MO, IPX5 water jet protection, over 3,000 charge cycles.Tecnical datas: 36 Volt - max. 40 Volt 333 Wh8,7 Ah1,8 kg Benefits & Features • Tabless cell technology – optimised energy flow and reduced heat build-up • Power Boost – automatic power boost under high load • IPX5 & Long Life – suitable for use in the rain and long-lasting Frequently Asked Questions Which systems is the battery compatible with? The AP 300.0 P is designed for the STIHL ALLPRO and AP systems. ALLPRO tools can be operated with ALLPRO and AP batteries. How quickly can the battery be charged? With the STIHL AL 1802 MO quick charger, the battery reaches an 80% charge level in 9 minutes.
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless planer with cutting depth adjustment Supplied without battery and charger (FAIE NR. 125562)Angle fenceChip ejection right or leftHandy cordless planer with 4-pole motor for maximum power in a compact designREDLINK™ electronics - overload protection in the machine and battery ensures a long service lifeThe REDLITHIUM™ ION battery offers a perfectly coordinated design, advanced electronics and loss-free power output Fast work progress thanks to carbide reversible bladesPrecise surface processing thanks to cutting depth adjustment up to 2.0 mmFolding depth of up to 10.7 mmChip ejection optionally on the left or rightMotor brake and foldable stand for safe storageConnection on both sides for dust bag or external extraction systemSingle cell monitoring for optimized service life and long battery life100% system-compatible with the MILWAUKEE®-M18™ product rangeScope of delivery: Rip fence, angle fence, chip bagTechnical data:Voltage: 18VStandard equipment | Scope of delivery: Rip fence, angle fence, chip bagWeight with battery: 2.7 kgCutting width: 82 mm
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
All Products
Particularly powerful cutting pliers for cutting metal wire (including hardened and tempered alloys). The ergonomic shape and length allow maximum force to be applied while still being comfortable in the hand. With non-slip 2K handles, forged design. Also cuts nails, bolts and screws (up to 4mm). Premium design, even for the toughest applications.
According to DIN ISO 5749, large leverage for easy cutting, inductively hardened precision cutting, cutting edge hardness 63 - 65 HRC, for hard wire/piano wire - see table for values, max. cutting capacity 1.4 - 2.0 mm, GEDORE special tempered steel, drop-forged, oil-hardened and tempered, JC = chrome-plated, with 2-component handle covers, TL = steel gray, with blue-dipped anti-slip handles.
Grip eyelet pliers18 eyelet impression devices (interchangeable)Eyelets of various sizes10mm snap fasteners for riveting and screwingDelivered in a practical plastic display cassette.
8 pieces, for internal and external security, straight and curved, in 2 sizes.
Strong design made of high-strength sheet steel, powder-coated, with 6 hole pipes, working range 2 / 2.5 / 3 / 3.5 / 4 and 5 mm .Total length 240mm
Original Rabitz pliers 250mm from Knipex. Suitable for professional use.
Robust and versatile - for twisting and cutting binding wire from the spool in a single operation.These pliers are the ideal tool for twisting and cutting binding wire – both in a single operation.This saves you time and effort, whether on the construction site, in the barn, or in the garden.Using wire directly from the spool is particularly practical.Cutting edges additionally hardenedCutting edge hardness approx. 61 HRCSpecial tool steel, oil-hardened and temperedPliers black lacqueredHead polishedThe hardened cutting edges with a hardness of approx. 61 HRC ensure clean and effortless cuts, even under frequent use.Made of high-quality special tool steel, oil-hardened and tempered, these pliers are durable and resilient, even for demanding tasks.They impress with their black lacquered surface and polished head – a sign of quality and solid workmanship.Whether for braiding wire mesh, securing reinforcement in concrete structures, or attaching nets and fences, these rabitz or weaving pliers are a reliable tool for professionals and hobbyists alike.Length: 25 cm
Professional rivet gun set including aluminum rivets in a PVC cassette.
1 piece blind rivet pliers, 10 pieces each aluminum rivets 2.4 mm, 3.3 mm, 4 mm, 4.8 mm.
World first! Practical universal pliers for holding and turning round materials such as screws, nails, etc.The special longitudinal and transverse ribbing ensures a secure hold and good power transmission. ~
An indispensable companion for precise cutting work in the workshop and household. ~This side cutter combines functionality with durability and is specially designed for cutting wires, cables and other materials. ~Ideal for electricians, DIY enthusiasts and craftsmen who value precision and reliability. ~Precise cutting performance, the Mllner side cutter 180mm has been developed with sharp cutting edges to ensure clean and precise cutting. ~No matter whether you If you need to cut through soft wires or harder materials, these side cutters deliver excellent results.Chrome vanadium steel, satin-finished headStrong-walled multi-component plastic handlealso suitable for hard wire
Made of hot-forged tempered steel. Surface painted black with blue-dipped protective handle cover.
Powerful side cutters for wire diameters up to 2 mm. The pliers also have a crimping function for 0.5–2.5 mm² cables and a stripping function for 1–2.6 mm. Total length: 200 mm.
For robust use, suitable for rivets 2.4 mm, 3.2 mm, 4 mm and 4.8 mm.
for stripping and stripping round and wet room cables from 8 - 13 mme.g. B. NYM cable 3 x 1.5 mm to 5 x 2 mm, data cable (CAT 5 to CAT 7),twisted pair (UTP / STP) andcoaxial cable (4, 8 - 7.5 mm) for cross-sections 0.2, 0.3, 0.8, 1.5, 2.5 and 4.0 mm easy to reach deep cable entries< br>Other technical properties: with opening spring Weight: 74g made of glass fiber reinforced polyamide
Needle-nose pliers with cutting edge, serrated, straight shapeAccording to DIN ISO 5745, flat-round, long jaws, straight gripping surfaces, serrated. For holding, gripping, bending and cutting workInductively hardened precision cutting edges, cutting edge hardness 61 - 63 HRCGEDORE special tempered steel, drop-forged, oil-hardened and temperedJC = chrome-plated, with 2-component handle protection covers .
Practical tweezers with a length of approx. 12 cm
For copper pipes and all non-ferrous metal pipes as well as thin-walled precision steel pipes from 4.75 - 10 mm, bending angle up to 90, length 260 mm.
With push button adjustment, best Gedore quality with diving handle protective cover.
Newly developed Wapu pliers with practical push button adjustment. Inductively hardened teeth, chrome vanadium special steel, 2-component handle protection cover, length 250 mm.
Width adjustment via push button.
The universal welding pliers for the maintenance and assembly of all wearing parts for your welder. High quality made from special tool steel.
A practical helper for wire fence assembly for connecting fences, breeding cages and wire mesh nettingAlso suitable for upholstery on car seats, sofas or mattresseswith automatic and spring-loaded feed system for easy handlingplier magazine for up to 50 C-shape wire ringsnon-slip 2-component handlerobust and reliable2 magazines C-shape wire rings (100 pcs.)Material: sheet steel (cold-rolled)Ring material: iron wireRing size: 11/16"
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.