Couplings, ball valves,
According to DIN 2353, for pipe connection, with L-hole
According to DIN 2353, for pipe connection, with L-hole
According to DIN/ISO 228, with L-hole
The manually operated 4/3-way valve INV has the function of a hydraulic control valve. The changeover valve can be used to control a double-acting hydraulic consumer such as a double-acting hydraulic cylinder. The 4/3-way valve enables the oil flow to be switched from port A to port B.In the centre position, all connections are closed. In this switching position, the flow through the valve is blocked.
The manually operated 6/2-way changeover valve DEV has the function of a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied by the upstream control unit, which retains all control functions.In the centre position, all connections are closed.
The hand-operated 6/2-way switching valve DEV functions as a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied with power from the upstream control unit, where all control functions are retained.In the centre position, all connections are closed.
The hand-operated 6/2-way switching valve DEV functions as a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied with power from the upstream control unit, where all control functions are retained.In the centre position, connections P, A and B are connected. The connections P1, A1 and B1 are also connected.
The manually operated 8/3-way valve INV has the function of a hydraulic control valve. The changeover valve can be used to control 2 double-acting hydraulic consumers, e.g. two double-acting hydraulic cylinders. The 8/3-way valve enables the oil flow to be switched from port A to port B and port A1 to port B1.In the centre position, all connections are connected to each other.
According to DIN 2353, for pipe connection.
According to DIN/ISO228.
For fastening in through holes or in tear-off holders. For shaft diameter 38mm, dimension 38x1.75 DIN471
Coupling branch for screwing into control valves with M22x1.5 mm internal thread.With this intermediate piece you can attach an additional coupling sleeve to additional control devices with M22x1.5 mm internal thread or connect a line to another hydraulic consumer.
Suitable for Steyr Series 80 with bulkhead thread, M22x1.5 IT.
Suitable for Claas, Renault. Can be coupled under pressure.
Suitable for Valtra. Can be coupled under pressure.
With bulkhead thread for screwing through to existing tractor consoles. Suitable for Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor. Can be coupled under pressure!
For direct mounting on original adapters suitable for Case, Fiat, New Holland and Steyr. Can be coupled under pressure!
With soft seal for sealing valves with a sealing edge surface.
Includes shaft and 2 springs. Length x width: 81x86mm
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.