​This Milwaukee accessory contains 11 saw blades for practically all applications. Contents:2x35mm plunge cut saw blade 2x65mm plunge cut saw blade1x65mm plunge cut saw blade with Japanese tooth2x28mm plunge-cut saw blade multi-material 2x43mm plunge cut saw blade multi1x segment saw blade 1x 52mm scraper.

​Suitable for cuts in wood and metal. 5 piece pack

​High-quality set including 4-12mm concrete drill bits, 3-10mm HSS-G metal drill bits, and a comprehensive assortment of impact-resistant bits.All tools feature a direct 6-point shank for compatibility with all standard drills and impact drivers with a 6-point shank.

​High-quality concrete drill bits from 4-12mm and HSS-G metal drill bits from 3-10mm, plus a comprehensive range of impact-resistant bits.For all standard screwdrivers and impact drivers with a 6-point shank (bits) or drill chuck (drill bits).In a practical plastic case.

​A pressure water pump for clear water with flexible drive shaftTightly sealed battery compartmentUp to 900 l water transfer with one M18™ 5.0 Ah battery chargeAt 3.4 kg, this 18 V cordless transfer pump is lighter than comparable corded devicesMaximum flow rate of 1817 l/h, up to 908 l per M18™ 5.0 Ah battery chargeThe REDLINK™ electronics switch the device off automatically when no more water is being sucked inThe flexible drive shaft and powerful motor achieve a maximum suction height of 5.5 m and a maximum delivery height of 23 m¾˝ external thread for standard water connections. A hose with an internal diameter of 19 mm is recommended for optimum performanceOnly suitable for clear waterTechnical data:Voltage: 18 VBattery: Li-ionWeight: 3.4 kgSystem: M18

Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger

​Robust metal housing and 13 mm drill chuckIntegrated key holderVariable, lockable speed switchPowerful angle drill with the performance of a power toolRobust metal housing and 13 mm drill chuckUp to 200 holes in 50 x 100 mm timber (22 mm auger bit) with one battery charge (5.5 Ah)The FUEL™ platform was developed for the most demanding users. The technology delivers maximum performance and combines three central components - 100% system-compatible with the MILWAUKEE®-M18™ product range Supplied without battery and charger (FAIE No. 129044)Technical data:Idle speed 0 - 1500 min-1Drill chuck clamping range 13 mmMax. Drill Ø in wood - auger bit 26 mmMax. Drill Ø in wood - self-drill 65 mmMax. Drilling Ø in wood - circular hole saw 102 mmMax. Drilling Ø in steel 12.7 mmWeight with battery approx. 4.1 kg

​ Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm

​Handy cordless chainsaw with metal claw stop and automatic chain lubrication.Integrated storage for wrenchThe M18 FUEL™ cordless pruning saw delivers outstanding performance and high torque for cutting hardwood without falteringDesigned to meet user requirements for ergonomics, performance and durabilityCompact design for better control and maneuverability in hard-to-reach areasUp to 180 cuts in 10 x 10 cm cedar wood with one M18™ HIGH OUTPUT™ 5.5 Ah batteryThe easily accessible chain tensioner enables quick adjustment of the chain tensionInfinitely variable speed control gives the user full control over the power outputMetal claw stop for improved leverageAutomatic chain lubrication for increased productivityTool storage for combination wrenchSupplied without battery and charger (FAIE no. 129044)Technical dataBattery: Li-ionVoltage: 18 VNumber of drive links: 33Chain pitch: 9.5 / 3/8 ”Gauge: 1.1 / 0.043 ”Chain speed: 5.0 (m/s)Saw blade length: 20 cmBar length: 20 cmTranslated with DeepL.com (free version)

​The dry cutting technology enables cold, fast and burr-free machiningHigh performance with a compact designIntegrated hookDry cutting technology enables cold, fast and burr-free cuttingTool-free depth adjustment, quick and easy adjustment of the cutting depth from 0 to 57 mmCompact and lightweight design for comfortable useDouble-acting trigger prevents accidental activationTool-free cutting depth adjustment and plunge lever for fast and effective plunge cutsIntegrated hook for easy storage between usesOn-board Allen key storage for easy access and to prevent loss of the keySupplied with 150 mm metal cutting blade with 34 teethThe DNA of our Fuel™ platform defines the balance of cordless technologies. Milwaukee®'s PowerState™ brushless motor, Redlithium™ tech100 % system compatible with the MILWAUKEE®-M18™ product range Supplied without battery and charger (FAIE No. 129044)Technical data:Version: Li-IonVoltage: 18 VIdle speed: 3900 (r/min)Saw blade ø: 150 mmSaw blade bore: 20 mmCutting depth 90°: 57 mmWeight: 5.9 kgType: M 18 FMCS-0X

Impact wrenches for every application. From particularly compact to extremely powerful. High speed for fast work.Customizable settings thanks to the ONE-KEY™ appSave custom settings to the device's memoryEasy management of your devices and equipmentM18™ FIWF12 with new ONE-KEY™ technologyConnects to the ONE-KEY™ app via Bluetooth®Complete customization of tool settings via the ONE-KEY™ app to tailor the tool precisely to your requirementsControl speed, torque, start and end speed, overload protection, and LED work area lightingConfigure the ideal settings for every applicationProgram/save profiles for absolute controlChoose from a number of pre-installed application profiles or simply create your own profile for the best resultsStore up to 4 custom profiles in the device's internal memory for quick changes at workDelivery without charger and batteryTechnical data:Idle speed: 900/1400/1900/2500Max. torque: 40/120/220/300Voltage: 18 VBattery: Li-ionImpact rate: 1300/2100/2550/3200Weight with battery: 1.8 kgMax. screw diameter: M16

​Compact design with a length of only 124 mmSuitable for M18 screwsCompact cordless impact wrench with a maximum tightening torque of 339 NmCompact design with an overall length of 124 mm for working in confined spacesDRIVE CONTROL™ enables quick switching between 4 switching stages with different speed and torque settingsPrecise working to prevent damage to the screw and material, for maximum performance and the toughest applications and for intelligent workingThe automatic switch-off function ensures that no more than 34 Nm of torque is applied when screwing by hand to prevent over-tighteningThree LEDs ensure optimum illumination of the work area½˝ Square locking boltMetal belt clipSupplied without battery and charger  (FAIE no 129044)Technical data: Version: Li-IonVoltage (V): 18Idle speed (rpm): 900/1650/2400/1200Idle speed (rpm): 1000/2400/3500Fastening: 1/2” external square driveMax. Torque (N-m): 102/203/339/34Torque for loosening (N-m): 339Weight (kg): 1.8Type: M 18 FIW2P12-0X

​Compact impact drill driver with a length of only 175 mm Newly developed drill chuck for improved bit and drill bit retention Bright LED workplace lighting Higher performance under load - high torque of 158 Nm AUTOSTOP™ function, increased safety.13 mm metal chuck for quick bit change and bit retention and secure hold of tools even when using the impact function. Brighter LED workstation lighting Battery charge level indicator shows remaining charge All-metal belt clip for quick and easy hanging of the tool Supplied without battery and charger (FAIE No. 129044)Technical dataVersion: Li-Ion Voltage (V): 18Idle speed (r/min): 0-2100 0-500 Idle speed (r/min): 0 - 33000Torque max.158NmDrilling capacity wood 89mmDrilling capacity steel 16mm 16 Drilling capacity masonry 16mm Weight (kg): 2.1

​Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger

​The brushless M18™ lawn trimmer reaches its full power in less than a second and can therefore also remove dense vegetation.Up to 4,600 min-¹ in first gear and up to 6,200 min-¹ in second gearTwo gears with variable speed switch allow you to choose between maximum power or maximum running timeAdjustable cutting width from 35 cm - 40 cmUp to one hour run time with one M18™HIGH OUTPUT™ 8.0 Ah battery chargeEasy to change the string head and adjustable two-handed handle for maximum comfort during and after useSupplied without battery and charger (FAIE no. 129044)Technical data:Weight with battery: 5.6 kgBattery: Li-ionVoltage: 18 VCutting line thickness: 2.4 mmCutting width: 40 cm

​Powerful cordless blower with an air flow rate of up to 17 m³/min at 233 km/h for removing leaves, gravel and debrisHigh, constant power with a consistent blowing force of 17.7 N over the entire battery runtimeBest control thanks to balanced design and two-handed and variable speed adjustmentInterchangeable nozzle attachments to optimize the air flow for different applicationsFull throttle in less than 1 secondSecond handle for better handling in tight spacesVariable speed control for full power control2 x 18-volt batteries for outstanding performance and runtimeSupplied without battery and charger (FAIE no. 129044), incl. cone nozzle and flat nozzle.Technical data:Version: Li-IonVoltage: 18 VAir flow: 0 - 1020 (m³/h)Weight: 2.7 kgType: M18 F2BL-0

​Milwaukee cordless planer with cutting depth adjustment Supplied without battery and charger (FAIE NR. 125562)Angle fenceChip ejection right or leftHandy cordless planer with 4-pole motor for maximum power in a compact designREDLINK™ electronics - overload protection in the machine and battery ensures a long service lifeThe REDLITHIUM™ ION battery offers a perfectly coordinated design, advanced electronics and loss-free power output Fast work progress thanks to carbide reversible bladesPrecise surface processing thanks to cutting depth adjustment up to 2.0 mmFolding depth of up to 10.7 mmChip ejection optionally on the left or rightMotor brake and foldable stand for safe storageConnection on both sides for dust bag or external extraction systemSingle cell monitoring for optimized service life and long battery life100% system-compatible with the MILWAUKEE®-M18™ product rangeScope of delivery: Rip fence, angle fence, chip bagTechnical data:Voltage: 18VStandard equipment | Scope of delivery: Rip fence, angle fence, chip bagWeight with battery: 2.7 kgCutting width: 82 mm

​Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg

​Spindle lock - increased productivityRAPIDSTOP™ for fast disk brakeUniversal holder for 6 and 8 mm accessoriesCorded power similar to that of a 1,200 W sanderSpindle lock - increased productivity by reducing 2 wrenchesRAPIDSTOP™- stops all accessories in less than 2 secondsLower battery compartment angle - for better balance and ergonomics compared to the previous modelUniversal holder for 6 and 8 mm accessoriesSlim handleRemovable dust grille prevents the ingress of dirt and extends the service life of the motorRubberized front for comfortable handlingLine lock-out function to prevent automatic switch-onM18 FUEL™ was developed for the most demanding users. The technology delivers maximum performance and combines three central components - the brush100 % system-compatible with the MILWAUKEE®-M18™ product range Supplied without battery and charger (FAIE no. 129044)Technical data:Idle speed: 27000 rpm.Max. diameter of sanding accessories: 50mmmax. collet diameter: 6 + 8mmWeight incl. battery: approx. 2.0kgSwitch: slide switchAnti-vibration system (AVS): YesBrake: YesBattery: Li-ionVoltage (V): 18

​Developed for high durability and everyday comfort, ideal for assembly work or light construction work.Nitrile coating protects the palm of the hand.Designed for high dexterity when handling small objects.SMARTSWIPE™ palms and fingertips allow touchscreen operation without removing the glove.Cut protection according to European standard: EN ISO 21420 and EN388:2016 (4121A).

​With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm

​THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.

​These blades can be used for cuts in a variety of materials, z. e.g. steel, aluminum, wood with nails, plastic and sandwich Length: 105 x 2 mm 5 piece pack

​The sharp and aggressive toothing is ideal for fast cuts in wood.Suitable for wood Length: 105 x 4 mm 5 piece pack