Flap tap for IBCs with an S75x6 external thread on the inner container.The tap has a locking bracket and a shut-off pin, which releases when opened for the first time.Connection to the IBC: S75x6 (DN50) female thread - coarseMeasured diameter: 70-77mm

Flexible spout with approx. 20cm and 2" connection to the IBC.Ideal for filling watering cans, canisters, buckets, etc.Connection to the IBC: S60x6 (DN50) female thread - coarseOutlet: 30mm spout< br>Measured diameter: 55-62mm

IBC hood as UV protection, suitable for 600 liter IBC tank.

IBC heating mat with thermostat suitable for 1000 L IBC tankPower: 1400WVoltage: 230VThermostat: 60 CControl range max.: 70 CMaterial: aluminum

With high-quality metal ball valve with 12mm hose nozzle as an outlet. Thanks to the anti-twist protection, the adapter is quickly and easily mounted on the IBC tank and is always in the correct position.Technical data: Connection to the IBC: S60x6 (DN50) IT - coarse, outlet: hose nozzle 12mm, measured diameter: 55- 62mm

Fill level indicator, suitable for IBC tanks with 2" fine thread, suitable for IBC lids with the corresponding fine thread opening.Manually adjustable from 150-250cm (depending on the tank interior height) using a spiral scale.Technical data: Connection to IBC: G2" (DN50) AG - fine, measuring range: 0-250cm

Fuel nozzle including Camlock quick-release fasteners and hose, ideal for easily emptying an IBC tank. Set consisting of:1x Camlock male part 1x Camlock female coupling 25mm1x fuel nozzle DN251x hose DN25, 2m length 2x hose clamp ~Technical data:  ~Connection to the IBC: S60x6 (DN50) IT - coarse, measured diameter 55-62mm

Standard outlet connector for connection to an IBC.There is a 2" coarse thread on both sides of the connector.Connection to the IBC: S60s6 (DN50) female - coarseOutlet: S60x6 (DN50) male - coarse

Large angled outlet nozzle, suitable for 3" IBC taps.The coarse thread on both sides ensures problem-free further adaptation.Connection to the IBC: S100x8 (DN80) IG - CoarseOutlet: S100x8 (DN80) AG - Coarse

Practical outlet nozzle, 2-part consisting of outlet nozzle and freely rotatable union nut (= anti-twist protection). Connection to IBC: S60x6 (DN50) IT coarse~ Outlet: 47mm hose nozzle~ Measured diameter: 55-62mm

Suitable for the simple and stable connection of two containers. ~Consisting of: ~2 x 1" tank duct with hose nozzle 5/4" (-32 mm)1 x 1 m Spiral hose inner diameter 32 mm2 x hose clamp W1 25-40 mm

Professional adapter from 2" (S60x6 / DN50) female thread - coarse to " female thread - fineConnection to IBC: S60x6 (DN50) female thread - coarseOutlet: " BSP female thread - fineMeasured diameter: 55-62mm

Practical adapter with a small stopcock suitable for hoses for direct connection. The anti-twist adapter enables easy and suitable installation on the IBC tank.Technical data: Connection to the IBC: S60x6 (DN50) IT - coarse, outlet: hose nozzle, measured diameter: 55-62mm

Standard screw cap for IBC taps, with a 2" coarse thread.Connection to the IBC: S60x6 (DN50) IT - coarseMeasured diameter: 55-62mmThe closure of the outlet valve is used as a screw cap IBC. In most cases, IBC's are equipped with a 2" coarse thread (S60x6 DN50) screw cap. However, since there are a large number of diameter and Since there are thread combinations on the market, it is important to measure the old cover or the existing tap (spout valve) precisely. Basically, there are also coarse and fine thread variants, with the most commonly used size again is a 2" coarse thread.If a larger dimension is installed at the outlet of the tap, this corresponds to a 3" coarse thread in almost all cases. The exact size details can be provided You can find it in the measured diameter measurement.

Screw cap for IBC taps, with a 2" fine thread.Connection to the IBC: 2" NPS (DN50) female thread - fineMeasured diameter: 57-62mmThe closure of the outlet valve is used as a screw cap marked on the IBC. In most cases, IBCs are equipped with a 2" coarse thread (S60x6 DN50) screw cap. However, since there are a large number of diameters here, and thread combinations on the market, it is important to measure the old cover or the existing tap (spout valve) precisely. Basically, there are also coarse and fine thread variants, with the most commonly installed Size is again 2" coarse thread. If a larger size is installed at the outlet of the tap, this corresponds to a 3" coarse thread in almost all cases. You can find the exact size information in the measured diameter measurement.

Screw cap 3", suitable for large IBC tapsConnection to the IBC: S100x8 (DN80) IT - coarseMeasured diameter: 90-100mmThe closure of the outlet valve on the IBC is referred to as the screw cap.< /em>In most cases, IBC's are equipped with a 2" coarse thread (S60x6 DN50) screw cap. However, since there are a large number of diameter and thread combinations on the market It is important to measure the old cover or the existing tap (outlet valve) exactly. Basically there are coarse and fine thread variants, with the most commonly used size being 2" coarse thread.< /em>If a larger dimension is installed at the outlet of the tap, this corresponds to a 3" coarse thread in almost all cases.You can find the exact size information in the "measured diameter" dimension.< /em>

In addition to the IBC tap, the lid is the most wanted accessory item for the containers..The existing sizes are DN150, DN225 and DN400mm. The size DN150 is installed as standard for IBC tanks.Larger diameters such as 225mm are a special size.With vent valve.Connection to the IBC: S165x6 (DN150 ) IG CoarseMeasured diameter: 155-164mm

Closed IBC lid without ventilation.In addition to the IBC tap, the lid is the most wanted accessory item for the containers. The existing sizes are DN150, DN225 and DN400mm The size DN150 is installed as standard for IBC tanks.Larger diameters such as 225mm are a special size. Connection to the IBC: S245x6 (DN225) IT RoughMeasured diameter: 235-245mm

Spacer, outlet extension with a length of approx. 11cm.2" on both sides - ideal problem solver for straight extensions.Connection to the IBC: S60x6 (DN50) IT - CoarseOutlet: S60x6 (DN50) AG - CoarseMeasured diameter: 55-62mm

Plastic tank made of high-quality UV-stabilized HDPE with a capacity of 1,000 l. The inner container is enclosed by a sturdy frame made of galvanized tubular steel. Easy transportation and safe standing thanks to installation on a plastic pallet that can be driven under (e.g. pallet truck). The tank is stackable, suitable for foodstuffs and is supplied complete with DN 225 lid and 2" outlet tap. Dimensions: W x H x D 1000 x 1180 x 1200 mm, Net weight approx. 52 kg.

This G1" bushing does not have to be countered from the inside and can therefore also be attached to inaccessible places. Required drill hole 43mm, outlet thread 1" AG fine

Tank bushing with outgoing IBC thread S60x6, which allows any additional IBC adapters to be attached.The opposite side has a G2" fine thread including seals and lock nut.Even without the lock nut, many different screw connections can be made with this adapter from G2" to S60x6 (e.g. screwing into IBC cover).

Ideal set for connecting 2 IBC tanks, consisting of:2x Camlock male part2x Camlock female coupling 38mm1x T-piece (DN40mm)3x pipe section (DN40mm)1x hose (DN40mm ), length 2m6x hose clampConnection to IBC: S60x6 (DN50) IT - coarseOutlet: hose, 40mm (DN40)Measured diameter: 55-62mm

​Use this practical connection set and the matching accessories to connect several IBCs togetherSet for quick connection of 2 IBC outletsCan be installed without tools Kit consisting of:2 adapters, 2“ coarse female thread to 1” fine male thread1 T-piece with anti-twist protection, 1"1 hose connector each, 1“ straight and 1” angled (90°)1.2 meters of DN 25 hose1 drain tap, 1"1 stepped hose clamp with connection option for 0.75“ / 1” and 1.25"