For flat and V-belt pulleys. 50 mm stiz for pulley, 3-hole flange with 70 mm bolt circle. Diameter refers to shaft . From shaft 35 mm - disc min. 130 mm.
Occurrence: plums, plums and mirabelle plums ~Main symptoms:Drilling of the fruits by the larvaA "rubber drop" is often present at the drill holeFructus around the core housing is destroyedFruit becomes unripe and falls off prematurely Biology: ~The larva hibernates in a cocoon under bark scales, rarely also in the ground. The first butterflies appear in May and lay their eggs individually on the fruits. The hatched larvae bore into the fruits and later leave them to pupate in the trunk.At the end of July, the second generation butterflies appear and deposit their eggs on the already ripening fruits. The resulting larvae bore into the fruit again and cause massive damage to the harvest. They overwinter in a cocoon. ~Egg laying: Females lay approx. 40-60 eggs ~Development time from egg to larva: around 10-14 days ~Main flight season: May and August (usually in the evening hours)Application: ~Assemble the trap and attach it with the included wire depending on the area of use. (The exact assembly instructions and the area of use are described in detail for each pheromone trap.) ~In order not to attract the pest directly to the crops to be protected, the trap should be hung in another nearby tree, for example. If this is not possible, the trap can be attached to a stake. Hang the trap between the main wind direction and the tree, at eye level. The trap entrances must not be blocked by branches and leaves. ~Each trap should be checked at regular intervals of 2-3 days. Whenever the trap is checked, the glue base must be cleaned of adhering insects using an auxiliary instrument (e.g. twig, wooden spatula) if necessary so that the full glue surface is retained. If it is heavily soiled, replace the glue base or re-glue it with Soveurode special glue (spray glue). ~Replace the attractant stubble and, if necessary, the glue base after 4-8 weeks.The traps must be hung up before the butterfly begins to fly. ~A trap set consists of: ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~1 trap body (WitaTrap Delta Super trap large) ~2 glue bases (packaged separately) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~2 pheromone stubbles (packaged separately) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~Hanging wire for assembly and a detailed description.
Pressure force 883 kg at 180 bar, connection G M16x1.5, nominal pressure 250bar
Pressure force 1272 kg at 180 bar, connection G M16x1.5, nominal pressure 250bar
Pressure force 2261 kg at 180 bar, connection G M18x1.5, nominal pressure 250bar
Pressure force 3534 kg at 180 bar, connection G M18x1.5, nominal pressure 250bar
Pressure force 5089 kg at 180 bar, connection G M18x1.5, nominal pressure 250bar
Single-acting hydraulic cylinder (plunger cylinder) without mounting parts on the piston rod and cylinder base. The piston rod has a diameter of 20 mm and is fitted with an extension lock at the lower end. Our cylinders are provided with a locating hole for dowel pins on the rod and base for easy attachment of fastening elements. A welding bevel is screwed onto the upper end of the piston rod.Pressure force 565 kg at 180 bar, connection G M14x1.5, nominal pressure 250bar
Single-acting hydraulic cylinder (plunger cylinder) with Ø16 mm ball joints. The piston rod has a diameter of 20 mm and is fitted with an extension lock at the lower end. The ball joint have a lubrication hole for lubricating the joint with a pointed nozzle.Pressure force 565 kg at 180 bar, connection M14x1.5, T = 35 mm, nominal pressure 250bar.
Single-acting hydraulic cylinder (plunger cylinder) with Ø16 mm ball joints. The piston rod has a diameter of 25 mm and is fitted with an extension lock at the lower end. The ball joint have a lubrication hole for lubricating the joint with a pointed nozzle.Pressure force 883 kg at 180 bar, connection M16x1.5, T = 35 mm, nominal pressure 250bar.
Single-acting hydraulic cylinder (plunger cylinder) with Ø20 mm ball joints. The piston rod has a diameter of 30 mm and is equipped with an extension lock at the lower end. The ball joints have a grease nipple for lubricating the joint.Pressure force 1272 kg at 180 bar, connection M16x1.5, T = 38 nominal pressure 250bar.
Single-acting hydraulic cylinder (plunger cylinder) with Ø20 mm ball joints. The piston rod has a diameter of 40 mm and is equipped with an extension lock at the lower end. The ball joints have a grease nipple for lubricating the joint.Pressure force 2260 kg at 180 bar, connection M18x1.5, T = 38 mm, nominal pressure 250bar.
made of plush, with bendable feet, approx. 32 x 19 x 33 cm
Indispensable for hobby chicken keepers and those who would like to become one, as well as for small animal breeders and exhibition visitors: This compact reference work presents 182 breeds in 366 color photos. A photo each of a rooster and a hen shows examples of standard representatives of the breed. The handy book provides information at a glance about the breeding history, breed characteristics and all important characteristics, special features, colors, laying performance and use of the different chickens and bantams. 192 pages.
216 Obstsorten auf einen Blick – kompakt, übersichtlich und praxisnah. Der Taschenatlas Obst stellt 216 neue und bewährte Obstsorten mit aussagekräftigen Fotos und leicht verständlichen Kurzbeschreibungen vor. Neben Baum- und Strauchobstarten finden Sie auch Erdbeersorten sowie zahlreiche empfehlenswerte Wildobstarten. Ein Farbleitsystem und übersichtliche Symbole erleichtern die Orientierung und helfen dabei, Sorten schnell zu vergleichen. Der Atlas unterstützt Sie beim Erkennen der verschiedenen Obstsorten und gibt praktische Hinweise zu Verwendung, Verarbeitung und Anbau. Zu jeder Sorte finden Sie wichtige Informationen zu Herkunft, Wuchs, Befruchtung, Ertrag, Resistenzen, Unterlagen und Anbaueignung. Zusätzlich zeigt der Atlas, für welche Einsatzbereiche die jeweilige Sorte geeignet ist – vom Hausgarten über den Erwerbs- und Bioanbau bis hin zur Mostherstellung oder Streuobstwiese. Ein praktischer Begleiter für Gärtner, Selbstversorger und alle, die sich für Obstsorten interessieren.221 Farbfotos, 126 Seiten.
Practical pocket bottle with a with swing top of 10cl. Height: 1.6 cm, material: glass.
With high flame temperature - suitable for soldering, flambing, lighting and much more.The burner can also be used in the kitchen for flambing or caramelizing.Design with safe piezo ignition, locking switch and regulator for adjusting the flame size.< br>Filling is done with conventional lighter gas.
Attractive pocket knife made of 440A stainless steel. Blade length 6.5 cm, stainless steel ferrule. ABS handle with fishing motif. When unfolded, the knife is 17cm long.
Attractive pocket knife made of 440A stainless steel. Blade length 6.5 cm, stainless steel ferrule. ABS handle with deer motif. When unfolded, the knife is 17cm long.
Attractive pocket knife made of 440A stainless steel. Blade length 6.5 cm, stainless steel ferrule. ABS handle with dog motif. When unfolded, the knife is 17cm long.
Attractive pocket knife made of 440A stainless steel. Blade length 6.5 cm, stainless steel ferrule. ABS handle with wild boar motif. When unfolded, the knife is 17cm long.
Pointed blade for cutting attachment (counter blade) suitable for Aebi high and medium cutting beams. The rivet holes are countersunk on the underside of the blade.
With handle, weight 2.5 kg. Particularly hardened.