New version
Practical honey extractor for hobby beekeepers and beginners with electric drive. The drum is made of acid-resistant stainless steel. The basket consists of 8 and 6 mm thick stainless steel rods. The transparent design of the lid makes it possible to observe the spinning process without opening it.With the radial centrifuges, more frames can be centrifuged at the same time than with comparable tangential centrifuges and without turning, which saves time! However, caution is advised with viscous honeys and large frames, as comb breakage could occur more easily.Ø: 720mm18 frames Zander, Langstroth, DNM30 frames Dadant ½ (145 or 160mm height)Drive: electric 230VMotor: 12V/150WDrum material thickness: 0.6mmLid: 4mm thick plexiglassPinch tap: stainless steel 6/4″Bridge, legs: powder-coated
The radial seal assembly and disassembly set enables easy, non-destructive assembly and disassembly of radial seal rings. The new radial sealing rings are pressed into their correct position using the various anodized adapter rings. The included puller is used to remove the radial sealing rings. This tool set can be used universally for diameters from 21.5 to 64 mm.Scope of delivery:7 aluminum adapters for pressing in the radial sealing rings5 large adapters 7 adapter rings for the most common central screws (M8, M10, M12, M14, M16, M18 and M20) 1 puller for removing stuck radial sealing rings
Nitrite, amine and phosphate-free additive for the cooler. Protects the cooler from frost, corrosion and increases the boiling point of the water. Suitable for aluminum engines.Dilutable: ~Antifreeze: water 1:1 - up to -38 °C1:2 - up to -17 °C1:3 - up to -11 °C
Content: 5 l (€3.90 / 1 l)
Suitable for Steyr 8000, 8100 series for overflow connector on the left!
Passend zu Massey Ferguson Serie 200, 500
for filler neck in the middle with return valve
suitable for FIAT: 450, 480, 500, 540, 550, 600, 640Height: 605mm (without filler neck)Width: 500mmHole spacing screw fastening: 268mm ~
Total height: 557mm,Total width: 470mm,Thickness: 66mm,Inlet: 38mm,Outlet: 45mm
Radiator for Steyr M968, M975 MWM engine, WD301
Suitable for Steyr: T190 and T190S
Height: 520mmWidth: 355mmDepth: 65mm ~Bottom connection: 32mmTop connection: 45mm ~
Radiator grille with headlights H 4 for Steyr Plus series,for conversion to H4 headlightsInstallation kit item no.: 99365 not included!
Length 1 m
