Metal pourer suitable for 10 and 20l metal canisters
Suitable for a wide range of canister, barrel and IBC threads. Thread DIN40, flow 1.5 L/min.
For clean pouring. No more drips and spills!! Length 93mm.
For clean pouring. No more drips and spills!! Length 98 mm.
6-fold special valve/spray head combination for various areas of application low odor suitable for bonding in the temperature range from -25 C to max. +70 C permanent synthetic rubber dissolved in solvent and dimethyl ether spray thinly onto a grease-free, clean and dry surface and approx Allow to flash for 3 - 5 minutes (depending on the ambient temperature), then press together with strong pressure to create tight connections between foams, various plastics, plastic films, paper, cardboard, wood, veneers, metal, cardboard, felt, textiles, insulating materials and limited polystyrene foam Test in advance for suitability Note: After use, be sure to spray the can overhead until only propellant gas comes out in order to prevent the valve and spray head from sticking Do not store or process below 10 C.
Content: 0.4 l (€21.22 / 1 l)
Spray guide suitable for marking sprays. Made of plastic.For clean and efficient work with all standard spray cans.The spray guide enables professional handling, similar to a spray gun, and helps you to effortlessly cover even larger areas.Protects the user's hands.
Small tool – big help when marking drill holes. The Pica spray marker has a fine 360° spray arm that allows you to easily reach even hard-to-reach areas. The special spray head works in any position and has a range of up to 1,500 shots. Easily sprays into drill holes up to 25 cm and from 3 mm in size. The green, fluorescent chalk powder adheres to virtually all surfaces. Its compact dimensions of only 35 x 129 x 38 mm make it suitable for use anywhere.
Without baffle plate.4 inch = DN100, ball outside diameter D = 130mm5 inch = DN120, ball outside diameter D = 150mm6 inch = DN150, ball outside diameter D = 180mm8 inch = DN200, ball outside diameter D = 243mm
3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm
Universally applicable professional spreader for fertilizer, seeds, lime and road salt. Large 29 liter plastic container with standard cover, spreading width up to 3 meters. Stable metal rod for adjusting the dosage amount. Large pneumatic tires for good traction and optimal floor protection.
Compression springs:10 pieces - 5.5 x 17 mm10 pieces - 6.5 x 10 mm 10 pieces - 7.0 x 19 mm6 pieces - 9.5 x 16 mm10 pieces - 5.5 x 38 mm10 pcs. - 7 x 12.5 mm8 pcs. - 9.0 x 35 mm12 pcs. - 9.5 x 19 mm12 pcs. - 9.5 x 19 mm li>Equipment of tension springs:12 pieces - 4 x 79.5 mm10 pieces - 5 x 20.5 mm< /li>10 pcs. - 6.5 x 22 mm12 pcs. - 7.0 x51 mm10 pcs. - 8 x 31.5 mm< /li>8 pcs. - 4.5 x 44.5 mm10 pcs. - 5.5 x 25.5 mm10 pcs. - 7, 0 x 38.0 mm8 pcs. - 8.0 x 28.5 mm12 pcs. - 8.0 x 44.5 mm
For quick weight control, with robust carabiner hook. Measuring range up to 50 kg.
Spring balancer TCN 9313 with 2–3 kg load capacity and 1.6 m stainless steel cable ensures controlled, spring-assisted tool return for ergonomic working positions. The aluminum die-cast housing combined with low-friction cable guidance enables smooth, wear-resistant operation in industrial environments. Advantages & functions • Aluminum die-cast housing – robust construction for industrial continuous use • Stainless steel cable Ø 2.0 mm – flexible, durable and wear-resistant for long-term use • Spring mechanism – automatic return of the tool to its starting position Frequently asked questions What load capacity is the unit designed for? The working range is 2–3 kg load capacity. What is the cable length? The stainless steel cable has a length of 1.6 m. Is it suitable for continuous operation? Yes, the design is intended for regular industrial use.
The spring compressor set with plastic protective inserts is ideal for assembling and dismantling the McPherson springs on the front and rear axles. A spacer is available for springs that taper in one direction. This means that small and large penholders can be used together. The spacer causes an offset of 30 mm. The plastic protective inserts prevent the spring coating from being accidentally scratched, thus reducing the risk of rust and the spring breaking again. The different pairs of spring holders with a diameter of 60 mm - 21.2 cm enable use on many types of vehicles such as BMW, Toyota, Ford, Opel, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi /strong> etc. The spring compressor has a maximum clamping force of 1500 kg, a working distance of 30 cm and is not suitable for impact wrench operation. for quick and professional removal and installation of spring struts< /li>suitable for most McPherson struts with conical and cylindrical springs
Simply bent, galvanized, in a practical economy pack.
The newly developed vintage car seat in the original design of the 60s with weight-adjustable suspension from 50 to 120 kg. The SPIRAMATIK NEW fits wherever the original ~KLEPP SPIRAMATIK-SEAT ~ is or was mounted, especially on the following Steyr vintage tractors: Type T80, T84, T86, 180, 188, 280, 285, 290. The tractors thus retain their original appearance and maintain good suspension comfort.
Feder für Ausrücklager passend zu Steyr Jubiläumsserie & Plus Serie
Suitable for Steyr Series Plus, 8000, 900, 9000, CVT~ Case series C, CS, CVX
galvanized, DIN 127