​Professional sewage pump for heavy-duty use—effortlessly handles fabric scraps, diapers, napkins, latex, etc. Ideal for hotels, guesthouses, apartment complexes, and campgrounds.Robust and reliable design with a gray cast iron housing, a shredding mechanism, and a stainless steel drive shaft.Includes a 10-meter H07RNF cable. Insulation Class F. IP68. The pump is supplied without a float switch or plug.To prevent consequential damage caused by dry running or a blocked cutting mechanism (not covered by warranty), operation via a motor protection switch is recommendedSupplied with 10m H07RNF cable. Iso class F. IP68.Maximum liquid temperature 50°C, pH 6-10Technical data:Connection pressure side: 5/4” (DN32) flangePower: 1.5 kW (approx. 2 HP)Max. pressure: 2.4 barVoltage: 400 V / 50Hz / 3 phases / 3.5AWeight: 33 kgDelivery volume at delivery head:4m - 136l/min8m - 127l/min12m - 115l/min16m - 100l/min20m - 80l/min24m - 46l/minPump dimensions:W 285mmC 270mmD 250mmE 520mm

Very robust wastewater pump with integrated cutting mechanism for pumping wastewater from houses, apartment buildings or similar. Thanks to the integrated cutting mechanism, fibrous materials such as diapers, napkins, latex and even plastic can be easily conveyed. However, solid materials such as wood or metal parts are not. The integrated float switch makes it easy to operate in automatic mode. The pump is made of robust gray cast iron and a chipper made of stainless steel. Technical data: Motor 1.5KW/2.0PS/230Volt, delivery rate max. 8,400l/h, maximum delivery height 25m (2.5 bar), weight 36 kg, connection thread: 5/4?IG.

High-quality submersible pump for suctioning clean water up to 2mm water level. Float switch with ON position for eliminating residual water. Housing made of stainless steel, impeller made of special plastic. Motor 370W / 230 volts, delivery rate max. 150 L/min, delivery height max. 7 meters. 5/4?IG connection on the top of the pump.

Compact and robust dirty water pump with oil-filled submersible motor with 0.55 kW/230 volts. Flow rate max. 230 L/min, delivery height max. 8 m, connection 5/4?IG. Dimensions: Height only 410 mm, diameter 245 mm. Thanks to the special level controller and compact design, it is ideal for dirty water shafts where space is limited, e.g. cleaning milking parlors, seepage shafts in driving silos, etc. Switching range of the float switch min. 10 cm, max. 20 cm.

​Self-priming (filled) electric pump for faeces and waste water with a max. particle size of up to 30 mm. Pump housing and impeller made of gray cast iron, wear plate made of stainless steel. Manometric suction head: 8m, max. Max. delivery head 15m, max. flow rate 900L/min = 54m3/h.Motor: 2.2 KW/3.0 HP 400 Volt. Connections 3" IG, net weight: 35Kg.Very solid pump for drainage, on construction sites or in agriculture where a submersible pump cannot be used.Translated with DeepL.com (free version)

Fäkalienpumpe mit integriertem Schneidwerk und Schwimmschalter. Motor mit 0,75 kW/230 Volt, Förderleistung max. 250 L/min, Förderhöhe max. 16 m, Gewicht 26 kg, Anschluß 2 Zoll IG. Ideale Pumpe für die Beseitigung von Hausabwässern, für Wochenend- und Ferienhäuser usw.Neue Ausführung serienmäßig mit Motorschutzschalter. Verhindert zuverlässig mögliche Schäden an der Pumpe durch das Verklemmen von Feststoffen im Schneidwerk.Pumpengehäuse und Laufrad aus robustem Grauguss, Hackwerk aus rostfreiem Stahl.Mit ölgekühltem Doppel Gleitdichtring (Unterdichtung aus Siliziumkarbid, Oberdichtung aus Keramik).Antriebswelle aus Edelstahl. Iso-Klasse F. IP68, maximale Flüssigkeitstemperatur 50 °C, pH 6-10Fördervolumen bei Förderhöhe:4m – 159 L/min8m – 130 L/min12m – 88 L/min16m – 30 L/minMaße der Pumpe:A 460 mmB 290 mmC 295 mmD 255 mmE 490 mm

Waste water/sewage pump made of high-quality AISI 316 stainless steel.The stainless steel pump housing and impeller make this pump ideal for use with aggressive or salty liquids, but the high-quality material also significantly extends the service life of domestic wastewater. Of course, this pump can also be used to pump foodstuffs (no official approval). The motor has an output of 0.75 KW/1.0 HP at 230 volts and is equipped with a float switch. Technical data: Delivery rate max. 380 L/min Delivery head max. 12 m (1.2 bar) Grain size up to 45 mm Dimensions: 453 x 168 x 223 mm H x W x D Weight: 16.5 kg Hose connection: 2" IG

Waste water/sewage pump with stainless steel housing and impeller.Thanks to the material used and the high-quality design, this pump is ideal for pumping contaminated or clean liquids in trade, industry or agriculture. The pump has a motor with 1.04 KW/1.4 HP and is equipped with a float switch. Due to the stainless steel design, this model is generally suitable for foodstuffs (no approval) and aggressive or salty liquids Technical data: Max. delivery rate: 460 L/min Max. delivery head: 14 m / 1.4 bar Grain size up to 45 mm Dimensions: 453 x 168 x 23 mm HxWxD Weight: 17 kg Hose connection: 2" IG

Extremely robust sewage pump with float switch. Motor: oil-filled submersible motor with 0.75 kW/230 volts. Flow rate 280 L/min, delivery height max. 9 m, solids up to 36 mm. Connection 2" IT, weight 23 kg. Robust pump for tough use and a long service life.With 10 m cable H07RN8-F , insulation class F, IP68.Maximum liquid temperature 50C, pH 6-10.Delivery volume at delivery head:1m - 300l/min2m - 277l/min3m - 252l/min4m 225l/min5m 198l/min6m 160l/min7m 120l/min8m 70l/minDimensions of the pump:

Submersible waste water pump with solid cast housing and stainless steel drive shaft. Suitable for grain sizes up to 55mm. Oil-filled submersible motor 1.5KW/2.0 HP 230 volts for optimal cooling under high loads. Output: max. 550L/min, delivery height max. 11 meters. Complete with float switch and 10m connection cable. Output: 2?IG. Hose and accessories such as Vortex 100.

Dirty water submersible pump with 750 watts/230 volts and float switch.Thanks to the high-quality INOX AISI 304 design, this pump has a very long service life and is also suitable for use with aggressive or salty liquids. Technical data: Delivery rate max.245L/min Delivery head: 8m (0.8 bar) Solids up to max.38 mm Dimensions: 370x195mm HxW/D Weight: 13kg Connection thread: 1-1/2" IG