​Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction

​Extremely lightweight thanks to aluminum housingEquipped with brushless electric motorProtection against overvoltage, overheating and overloadDouble safety thanks to mechanical-electrical brakeSuspension of the chain hoist by means of rotating support hooks General information:Load capacity: 250 kg Lift: 3 mLifting speed(es): 3 m/min Cable length of control unit: 6 m

​Extremely lightweight thanks to aluminum housingEquipped with brushless electric motorProtection against overvoltage, overheating and overloadDouble safety thanks to mechanical-electrical brakeSuspension of the chain hoist by means of rotating support hooks General information:Load capacity: 500 kg Lift: 3 mLifting speed(es): 4 m/min Cable length of control unit: 6 m

Electronically controlled charging and starting device for all common starter batteries in the automotive sector. Suitable for gel and AGM batteries. Charging strength adjustable in 2 levels (4A or 12A), switchable for 24V batteries. Also suitable for trickle charging (seasonal vehicles, lawn tractors, etc.) thanks to electronic charging control. BOOST function with 100A as a starting aid. Winter mode ensures optimal charging even at temperatures below 0C. Supplied with 1.5m charging cable and carrying handle.Technical data:Power: 270WCharging voltage: 12/24 VCharging current: 4/8/15/100 ACharging cycles: 6Connection voltage: 230VDimensions (LxWxH): 295x235x195mmWeight: 8.5kgArea of application:Suitable for battery types: AGM, GELArea of application: charging: motorcycle, car, kB, kT, trucks<~7.5t, boatsArea of application starting: Motorcycles, cars, kB, kT, trucks<~7.5t, boats

For professional users in repair, body and car electrical workshops ~Ultra-light device with integrated lithium batteryWith memory saver function: In backup charging mode, use as a power supply to maintain the settings of the vehicle electronics when the battery is removed - important function for modern cars in which the battery change can only be carried out in backup charging mode in order to maintain the settings of the electronic devices in the vehicle (radio code, seat and driver comfort settings, ...)Patented microprocessor controlDisplay with error code displayEasy to use thanks to extensive protection functions, e.g. against incorrect polarity or overvoltageNo defect in the internal battery if it is discharged for a long timeFour-cell LiFePO4 battery with high security against independent ignitionFive times longer lifespan than devices with conventional batteries - approx. 3000 cycles0.5 m long starting cable with fully insulated alligator clipsQuality Made in EuropeGeneral informationStarting voltage12VPeak starting current2000AI-Start800AProtection classIP 32Dimensions and weightsCharging cable length0.5mLength (product) approx.260mmWidth/depth (product) approx.135mmHeight (product) approx. 72 mm Weight (net) approx. 2.4 kg Electrical data Connection voltage 230 V Mains frequency 50 Hz Area of application Suitable for battery types WET / GEL / AGM Area of application starting: motorcycles / boats / cars / vehicles / commercial vehicles

Carrier clamp for quick and easy creation of an anchor point.The wide adjustment range ensures flexible handling.Suitable for holding lifting equipment, pulleys and loads.With central spindle mechanism for easy attachment to the carrier with a fixed, secure fit.

Carrier clamp for quick and easy creation of an anchor point.The wide adjustment range ensures flexible handling.Suitable for holding lifting equipment, pulleys and loads.With central spindle mechanism for easy attachment to the carrier with a fixed, secure fit.

The unique, automatic cable guide prevents crushing and pressure and thus increases the service life of the steel cable. With the quick coupling system, the winch can be used immediately without complicated assembly. Lifting force 250kg/500kg (with deflection roller), lifting height 15m or 30m. Lifting speed max. 8m/min, rope diameter 4 mm, power connection 230V / 50 Hz, power 1000 watts.

The unique, automatic cable guide prevents crushing and pressure and thus increases the service life of the steel cable. With the quick coupling system, the winch can be used immediately without complicated assembly. Lifting force 400kg/800kg (with deflection roller), lifting height 15m or 30m. Lifting speed max. 8m/min, rope diameter 5 mm, power connection 230V / 50 Hz, power 1300 watts.

Universally applicable chain hoist with Siemens electrics and an ideal price-performance ratio. With a lifting speed and a load capacity of 1000kg. Suspension by means of carrying hooks, overload protection by means of a slip clutch. Including chain storage, integrated limit switch and control bottle for optional upgrade with electric chassis.Load capacity: 1tLifting height: 6 mLifting speed: 5.1 m/min< /li>Input power: 1.4 kWPower connection: 400V/50HzDimensions (LxWxH): 636x272x460 mmWeight: 54.3 kgCable length control unit: 6 mProtection rating: IP 54Number of chain strands: 1

Universally applicable chain hoist with Siemens electrics and an ideal price-performance ratio. With a lifting speed and a load capacity of 2000kg. Suspension using a carrying hook, overload protection using a slip clutch. Including chain storage, integrated limit switch and control bottle for optional upgrade with electric chassis.Load capacity: 2tLifting height: 6 mLifting speed: 2.6 m/min< /li>Input power: 1.4 kWPower connection: 400V/50HzDimensions (LxWxH): 636x176x650 mmWeight: 68.5 kgCable length control unit: 6 mProtection rating: IP 54Number of chain strands: 2

Universally applicable chain hoist with Siemens electrics and an ideal price-performance ratio. With a lifting speed and a load capacity of 500kg. Suspension using a carrying hook, overload protection using a slip clutch. Including chain storage, integrated limit switch and control bottle for optional upgrade with electric chassis.Load capacity: 0.5tLifting height: 6 mLifting speed: 7.7 m/ minInput power: 1.2 kWPower connection: 400V/50HzDimensions (LxWxH): 636x276x410 mmWeight: 49 kgCable length control unit: 6 mProtection rating: IP 54Number of chain strands: 1

Electric chassis with a load capacity of 1,000kg and a driving speed. Suitable for Aircraft chain hoist 500kg &~ 1000kg. Connection and control are carried out via the operating button of the associated chain hoist.Can be used with the following carrier types:IPE 160 - IPE 400 (DIN 1025-5), ~IPBl 100 - IPBl 180 (DIN 1025-3) , ~IPB 100 - IPB 180 (DIN 1025-2), ~IPBv 100 - IPBv 160 (DIN 1025-4), ~I 160 I 475 (DIN 1025-1 )Load capacity: 1tCarrier flange width: 74-180 mmWheel diameter: 68 mmTravel speed: 13.5 m/min< /li>Input power: 0.4 kWPower connection: 400V/50HzPhases: 3 PhDimensions (LxWxH): 715x340x260 mm< /li>Weight: 26 kg

Synchronous emergency power generator for the demanding private user and the semi-professional All generators with copper windings Short-term power up to 3 times the nominal power Automatic voltage regulation AVROverload protection through thermal protection switchLow oil shutdown with warning lamp3 in 1 display for voltage, frequency and operating hoursLong running time thanks to large tankTank with level indicatorEasy transport thanks to wheel set and sturdy folding handles Technical data: Voltage: 230VEmergency power LTP: 5.5kW Continuous power: 5kW Motor: SC188FFuel : petrolStarter: electric start / manual startTank capacity: 25lSound power level: 97dBGenerator protection class: IP23 li>Protection class sockets: IP44Socket version: 2x230V Schuko / 1x230V 32ADimensions: 700x580x526mm (lxwxh)Weight: 90.5kg li>

The Synchron PG 800 TRA is a powerful professional emergency generator, ideal for demanding applications. With an 11 liter tank, it offers long running times and electronic voltage regulation (AVR) for stable power supply. Panel panels protect against splash water and impacts, while ergonomically placed connections make operation easier. Overload and oil shortage protection ensure safety.The unit can deliver up to 3 times the nominal power for short periods. It can be used in a variety of ways for 230V and 400V consumers. It is powered by a powerful Honda GX390 petrol engine with an 11 liter tank. It starts by hand start, with IP23 for the generator and IP44 for the sockets. The equipment includes a Schuko socket with 16A for 230V and a 400V 16A socket.With dimensions of around 729x500x536mm and a weight of 81kg, it is robust and yet handy. The Synchron PG 800 TRA is reliable and ideal for professional power supply in various situations. ~Summary: ~Professional emergency power generator suitable for difficult-to-start Machines and power toolsLong running times thanks to 11l large tankElectronic voltage control AVRSplash and impact protection thanks to cladding panelsErgonomically convenient connections on the front sideOverload protection through Thermal protection switchLow oil shutdownShort-term performance up to 3 times the nominal powerUniversally applicable for 230V and 400V consumersQuality Made in EuropeTechnical data: Voltage: 230 / 400VEmergency power LTP 230V: 4.9kW / 5.5kVAContinuous power COP 230V: 3.7kW / 4.1kVAEmergency power LTP 400V: 6.6kW / 8.3kVAContinuous power COP 400V: 5.6kW / 7.0kVAEngine: Honda GX390 petrol< li>Fuel: petrolCapacity tank: 11lStarter: manual startProtection class generator: IP23Protection class sockets: IP44Socket version: 1x230V Schuko 16A / 1x400V 16ADimensions: 729x500x536mmWeight: 81kg

The Synchron PG-E 80 TEA power generator is a high-quality emergency power generator, ideal for demanding private users and semi-professional use.With copper windings, it ensures high performance and stable power generation. Its short-term performance of up to 3 times the nominal power supports starting processes of electrical devices. ~The automatic voltage regulation (AVR) ensures constant power supply for sensitive devices. ~A thermal protection switch offers overload protection, while the low-oil shut-off with warning lamp Protects the motor from damage.The 3-in-1 display shows voltage, frequency and operating hours. The generator with 25 liter tank enables long running times, supported by a level indicator. ~Ergonomically placed connections make handling easier. ~Summary: ~Emergency generator for the demanding private user and the semi-professionalAll generators with copper windingsShort-term power up to 3 times the nominal powerAutomatic voltage regulation AVROverload protection through thermal protection switchLow oil shutdown with warning lamp3 in 1 display for voltage, frequency and operating hoursLong running time thanks to large tankTank with level indicator Ergonomically convenient connections on the front Technical data: Voltage 230 / 400V Emergency power LTP / 230V 2.5kWContinuous power COP / 230V 2.3kWEmergency power LTP / 400V 7.0kWContinuous power COP 400V / 6.5kWEngine SC190FFuel petrol Starter electric start / manual startCapacity tank 25lSound pressure 76dB (A) Protection class generator IP23 Protection class sockets IP44 Dimensions 700x526x580mm (lxwxh) Weight 93.7kg

For demanding private users and semi-professionalsInverter technology for constant performanceReliable power generator for home and garden, camping, caravans, boats, computers and other sensitive electronic devicesIn Eco mode, the generator regulates the speed depending on power consumption: this reduces fuel consumption and noise emissionsChoke for problem-free cold startsIndicator lights for output voltage, overload and lack of oil Overload protection through thermal protection switch Low oil shutdown with warning lamp Technical data: Length x width x height: 448x236x392mmWeight: 12.1kgType: InverterTime-limited output power (active power): 1.1kWContinuous output power (active power): 1.0kWRated voltage: 230VGenerator protection class: IP 23MStarting system: manual startFuel: petrolTank capacity: 3.0lRunning time at 50% load: 6.6hRunning time at 100% load: 4.4hSound pressure: 70 dB(A)< /li>

Mobile fan for industrial use, including carrying handle and four rubber feet for low-vibration operation.Suitable for removing warm air, welding fumes, sawdust, smoke, gases, odors, dust or other contaminated air.Can also be used to supply fresh air in poorly ventilated places. Can be used for cooling, ventilation, drying &~ Ventilate large rooms such as factories, workshops, halls, construction sites, etc.With an optional hose, you can make it easier to supply and remove air masses over longer distances.Technical data:Basket : 380 mmBucket wheel : 300 mmMax. Air volume: 65m/minSpeed speed: 2800m min-1Power connection: 230V / 50HzPower: 500 WDimensions (L x W x H): 420x380x380 mm

​With a maximum load capacity of one tonSuitable for loading and unloading, for assembly, repair or storage work on flat and smooth floors in workshops and hallsEasy to move thanks to four swivel castors with parking brakesSimple and safe height adjustment in unloaded state via lever and two locking bolts per support legStable stand and robust, torsion-resistant design thanks to additional cross strutsSupplied without lifting device.Technical dataLoad capacity: 1t Lifting height min.: 2200 mmLifting height max.: 3600 mm Clear width: 2400 mmI-beam dimensions: 74 x 120 mm Dimensions and weights: Length: approx. 2500 mm Width/depth: approx. 1200 mmHeight: approx. 2520 mm Weight (net): approx.128 kg

Roller chassis with a maximum load capacity of 500 kg Low height and compact design For use on I-beams (DIN 1025-1) Smooth running properties thanks to ball bearingsNo lateral movement on the traverse thanks to the central suspension of the pulley systemAdjustment to the carrier flange width is achieved using an eyelet traverse with a counter threadStandard anti-tip deviceNo lateral movement on the traverse thanks to the central suspension of the trainStandard tilt protection The beam width is adjusted using the eyelet traverseLow height and compact construction li>For use on I-beams Smooth running properties thanks to ball bearings

Roller chassis with a maximum load capacity of 1,000 kg Low height and compact design For use on I-beams (DIN 1025-1) Smooth running properties thanks to ball bearingsNo lateral movement on the traverse thanks to the central suspension of the pulley systemAdjustment to the carrier flange width is achieved using an eyelet traverse with a counter threadStandard anti-tip deviceNo lateral movement on the traverse thanks to the central suspension of the trainStandard tilt protection The beam width is adjusted using the eyelet traverseLow height and compact construction li>For use on I-beams Smooth running properties thanks to ball bearings

Roller chassis with a maximum load capacity of 2,000 kg Low height and compact design For use on I-beams (DIN 1025-1) Smooth running properties thanks to ball bearingsNo lateral movement on the traverse thanks to the central suspension of the pulley systemAdjustment to the carrier flange width is achieved using an eyelet traverse with a counter threadStandard anti-tip deviceNo lateral movement on the traverse thanks to the central suspension of the trainStandard tilt protection The beam width is adjusted using the eyelet traverseLow height and compact construction li>For use on I-beams Smooth running properties thanks to ball bearings

Equipment details: Lid can be easily closed using screw locks12-volt fluorescent tube with 230-volt power supply and external switchSuitable for various blasting materials, e.g. quartz, glass spheres , plastic ball, etc.Ideal for cleaning, derusting or removing paint from all kinds of metal parts, e.g. engine parts, fittings, signs, housings, rims, hingesHigh-quality latex work gloves are secure connected to the housingOptimal visibility and occupational safety when processing workpieces due to the viewing window with glued-on protective filmDust-free work thanks to all-round seals on the lid and door framesStable storage grid enables Placing workpieces in the interior of the cabinWith drain opening for changing the blasting materialSuction pipe for the blasting material attached to the bottom of the collecting containerWith compressed air connection on the outside li>Glass bead blasting media, corundum blasting media, silicon carbide, plastic blasting media, etc. can be used  ~Technical data: Volume work cabin : 90lAir consumption: 200-350l/minWorking pressure: 2.8 - 8.0barCompressed air connection: 3/8"< li>Blast media core size: 0.42 - 0.125Inside dimensions: 580 x 480 x 300mmOutside dimensions: 590 x 489 x 490mmWeight: 17 .25kgInlet pressure max.: 8.6barMax. Weight on the support grid: 10kgMax. Weight of blasting material: 12kgHand hole diameter: 155mm

The WPP 30 EF is a robust press with conventional equipment. It has a maximum pressure force of 30 tons and is ideal for use in workshops, industry and agriculture. The press is easy to use and has a number of safety features. It is also equipped with a pressure gauge so that the pressure can be checked at any time. The WPP 30 EF is a reliable and versatile press suitable for a wide range of applications.Here are some of the advantages of the WPP 30 EF:Maximum pressure force of 30 tonsRobust constructionEasy to useEquipped with safety functionsEquipped with pressure gaugeVersatile in use The WPP 30 EF is an ideal press for anyone looking for a reliable and versatile machine for use in workshops, industry and agriculture.General informationPress force: 30t, piston stroke: 150mmPiston travel: 200mm Dimensions and weightsLength: ~ approx. 795mm, Width/Depth: approx. 700mm Height: approx.1830mm, weight: ~ approx. 167kg Clear width: 535mm, installation height max.: 1031mm Installation height min.: 151mm