Suitable for Steyr: Hydraulic steering 1200, 8080 from VG.No. 8947, 942, 948, 955, 964, 968, M968, 970, 975, M975, 9078, M9078, 9083, 9086, M9086, 9094, M9094

Suitable for Fendt: Farmer 102, 103, 104, 105, 106, 108, Farmer 200S/SA, 201, 303LS, 304LS, 305S/LS/LSA, 306S/LS/LSA, 307S/LS /LSA, 308S/LS/LSA, 309S/LS/LSA, 310LS/LSA, 311LSA, 312LSA, F250GT, F255GT, F275GT/GTF, F345GT/GTM, F360GT/GTF/GTH, F365GTA, F380GT/GTA/GTF, F390GTA , F395GTA/GHA

Suitable for Steyr: Hydro steering 8060 from 01/80, 8070, 8075, 8100, 8120, 8140, 8150, 8160, 8170

Suitable for Deutz: D2506, 3006, 4006, 4506, 5006, 5206, 5506, 6006, 6206, 6806, 7006, 7206, 8006, 9006, 10006, 13006, 16006, D4007, 4507, 4807 , 5707, 6007, 6207, 6507, 6807, 6907, 7007, 7207, 7807, D4507C, 4807C, 5207C, DX 3.50, 3.60, 3.70, Intrac 2002, 2003, 2004, 2006, 6.05, 6.30, 6.60

Suitable for Fiat, New Holland: 45-66, 45-66S, 50-66, 55-66, 55-76F, 55-86F, 55-90, 60-66, 60-76, 60-85, 60-90, 60-93, 60-94, 62-86F, 65-66, 65-90, 65-93, 65-94, 90-90, 95-55, 1180, 1280, 1380, 1580, 1880, 100-90, 110-90, 115-90, 130-90, 140-90, 160-90, 180-90, Winner F100, F120, F130

Hydraulic oil based on high-qualityselective raffinates with active ingredients to improveoxidation resistance and corrosion protection.DIN 51 524/Part 2.

Hydraulic oil based on high-quality selective raffinates with active ingredients to improve oxidation resistance and corrosion protection. High viscosity index.DIN 51 524/Part 3.The hydraulic oil HVLP ISO-VG 32 is suitable for higher temperatures (up to max. 120°C) in hydraulic systems.

Hydraulic oil based on high-quality selective raffinates with active ingredients to improve oxidation resistance and corrosion protection. High viscosity index.DIN 51 524/Part 3.The hydraulic oil HVLP ISO-VG 46 is suitable for higher temperatures (up to max. 120°C) in hydraulic systems.

In glycerin bath with 1/2? radial connection.

In glycerin bath with 1/4? radial connection.

With front ring for installation in the dashboard or in a control panel. The connection with external thread is located on the back of the pressure gauge. The specification of the diameter 100mm refers to the outer housing diameter of the pressure gauge for the cutout in the dashboard or dashboard.

With front ring for installation in the dashboard or in a control panel. The connection with external thread R 1/4 inch is located on the back of the pressure gauge. The diameter 63mm refers to the outer housing diameter of the pressure gauge for the cutout in the dashboard or dashboard.

This hydraulic pump can be used instead of the original 8cm in the vehicles Lindner Geotrac 50 and Lindner Geotrac 60 as well as Steyr M948 and M958.

Steering pump for Deutz, Hrlimann, Lamborghini, Same

For the hydraulic drive of firewood splitters, cable winches, forestry cranes, etc.Consisting of:1 piece transmission gear with PTO shaft stub 1:3.81 piece hydraulic pump BG2 19.2cm /rev., clockwise rotation1 piece pump driver1 pieces angle flange for suction pipes R1/2 inch female thread1 pieces angle flange for pressure pipe R3/8 inch female threadDelivered in individual parts!Calculation example:Wood splitter with hydraulic cylinder inner diameter 100 mm, stroke 1000 mm, speed on the PTO shaft 350 rpm.For use comes a gearbox with a ratio of 1:3.8. This results in a pump speed of 1330 rpm (350 x 3.8 = 1330 rpm).The hydraulic pump delivers 36L/min at a PTO speed of 350 rpm.

For the hydraulic drive of firewood splitters, cable winches, forestry cranes, etc.Consisting of:1 piece transmission gear with PTO shaft stub 1:3.81 piece hydraulic pump BG2 26.2cm /rev., clockwise rotation1 piece pump driver1 pieces angle flange for suction pipes R3/4 inch female thread1 pieces angle flange for pressure pipe R1/2 inch female thread Delivered in individual parts!Calculation example:Wood splitter with hydraulic cylinder inner diameter 100 mm, stroke 1000 mm, speed on the PTO shaft 350 rpm.For use comes a gearbox with a ratio of 1:3.8. This results in a pump speed of 1330 rpm (350 x 3.8 = 1330 rpm).The hydraulic pump delivers 36L/min at a PTO speed of 350 rpm.

For the hydraulic drive of firewood splitters, cable winches, forestry cranes, etc.Consisting of:1 piece transmission gear with PTO shaft stub 1:3.81 piece hydraulic pump BG3 32,3 ccm /rev., clockwise rotation1 piece pump driver1 pieces angle flange for suction pipes R1 inch female thread1 pieces angle flange for pressure pipe R3/4 inch female threadDelivered in individual parts!Calculation example:Wood splitter with hydraulic cylinder inner diameter 100 mm, stroke 1000 mm, speed on the PTO shaft 350 rpm.For use comes a gearbox with a ratio of 1:3.8. This results in a pump speed of 1330 rpm (350 x 3.8 = 1330 rpm).The hydraulic pump delivers 36L/min at a PTO speed of 350 rpm.

For the hydraulic drive of firewood splitters, cable winches, forestry cranes, etc.Consisting of:1 piece transmission gear with PTO shaft stub 1:3.81 piece hydraulic pump BG3 43.4 ccm /rev., clockwise rotation1 piece pump driver1 pieces angle flange for suction pipes R1 inch female thread1 pieces angle flange for pressure pipe R3/4 inch female threadDelivered in individual parts!Calculation example:Wood splitter with hydraulic cylinder inner diameter 100 mm, stroke 1000 mm, speed on the PTO shaft 350 rpm.For use comes a gearbox with a ratio of 1:3.8. This results in a pump speed of 1330 rpm (350 x 3.8 = 1330 rpm).The hydraulic pump delivers 36L/min at a PTO speed of 350 rpm.