Hydraulic pump suitable for Ford and New Holland, complete with drive wheel
Inner diameter: 35mmLength: 200mm ~
with locking block, double-acting, R3/8 female thread
The hydraulic unlockable check valve prevents automatic adjustment and sinking under load. Scope of delivery: complete with connection hoses including plug and dust protection. Including hydraulically unlockable check valve (locking block).Piston K = 50mm, piston rod S = 25mm, up to approx. 70HP, pressure force 3534kg, pulling force 2650kg.The specified lengths always refer to the centre of the pin to the centre of the pin!
The hydraulic unlockable check valve prevents automatic adjustment and sinking under load. Scope of delivery: complete with connection hoses including plug and dust protection. Including hydraulically unlockable check valve (locking block).Piston K = 70mm, piston rod S = 35mm, up to approx. 120HP, pressure force 6927kg, pulling force 5195kg.The specified lengths always refer to the centre of the pin to the centre of the pin!
The installation length can be continuously adjusted using the attachment on the tractor side with an M30 thread (Cat.2). Scope of delivery: complete with connection hoses including plug and dust protection, chain for catch hook, top link ball. Including hydraulically unlockable check valve (locking block), without ball eye or swivel bearing.Piston K = 70 mm, piston rod S = 35 mm, up to approx. 100 HP, pressure force 6927 kg, pulling force 5195 kg.The length refers to the bolt centre of the hook to the end of the screw-in sleeve!
Complete with connection hoses, timing chain for catch hook, top link ball and stroke indicator. Including hydraulically unlockable check valve (locking block).Piston K = 63mm, piston rod S 36mm up to approx. 90HP, pressure force 5600kg, pulling force 3900kg.The specified lengths always refer to the centre of the pin to the centre of the pin!
Scope of delivery: complete with connection hoses including plug and dust protection, chain for catch hook, top link ball. Including hydraulically unlockable check valve (locking block).Piston K = 70mm, piston rod S = 35mm, up to approx. 120HP, pressure force 6927kg, pulling force 5195kg.The specified lengths always refer to the centre of the pin to the centre of the pin!
Scope of delivery: complete with connection hoses including plug and dust protection, chain for catch hook, top link ball. Including hydraulically unlockable check valve (locking block).Piston K = 80mm,Piston rod S = 40mm, up to approx. 160 HP, pressure force 9047kg, pulling force 6785kg.The specified lengths always refer to the centre of the pin to the centre of the pin!
Hydraulic top link with cat. 3 catch hook and articulated head support. Particularly suitable for mounting heavy implements. The top link is supplied with a hydraulically unlockable non-return valve (locking block). The connection hoses are complete with plug, dust protection and the appropriate screw-in connector for the locking block. The actuation chain for the catch hook and the top link ball are included in the scope of delivery. Suitable for tractors up to approx. 250 hp, piston Ø K = 90 mm, piston rod Ø S = 45 mm, pushing force 11451 kg, pulling force 8588 kg.The specified lengths always refer to the centre of the pin to the centre of the pin!
Hydraulic top-link with hook Cat.3 and joint head. Particularly suitable for mounting heavy equipment. Including hydraulically unlockable check valve (locking block).Suitable for tractors up to approx. 200 HP, piston K = 80mm, piston rod S = 40mm, pressure force 9047kg, pulling force 6785kg.The specified lengths always refer to the centre of the pin to the centre of the pin!
Suitable for tractors up to approx. 250 HP, piston K = 90mm, piston rod S = 45mm, pressure force 11451kg, pulling force 8588kg. With CBM catch hook Cat.3 including ball Cat. 3 32.2mm. Including hydraulically unlockable check valve (locking block), 2 hydraulic hoses with plug and dust caps, actuation chain for catch hook, top link bracket and lift indicator.Indication of the installation length including joint head.The specified lengths always refer to bolt centre to bolt centre including the knuckle !
Suitable for tractorsup to approx. 200 HP, piston K = 80mm, piston rod S = 40mm, pressure force 9047kg, pulling force 6785kg. CBM catch hook cat. 3 with ball cat. 3/2 25 mm, bolt 28 mm for joint head mount. Includes hydraulically unlockable check valve (locking block), 2 hydraulic hoses with connectors and dust caps, operating chain for catch hook and lift indicator. Indication of the installation length including the joint head.Please order the joint head that fits your top link bolt on the tractor/tractor with a bore of 25mm (Faie No. 102310), 28mm (Faie No. 102311) or 32mm (Faie No. 102312).The specified lengths always refer to bolt centre to bolt centre including the knuckle !
Suitable for tractors up to approx. 250hp, piston K = 90mm, piston rod S = 40mm, pressure force 11451kg, pulling force 9150kg. Suitable for Fiat, Ford, New Holland and Steyr Profi. CBM catch hook cat. 3, with ball cat. 3/2 25mm. Including hydraulically unlockable check valve (locking block), 2 hydraulic hoses with plug, actuation chain for catch hook, top link bracket and lift indicator.Indication of the installation length including joint head.The specified lengths always refer to bolt centre to bolt centre including the knuckle !
Affordable hydraulic lower link adjustment for easy self-assembly. On slopes or tight curves, the entire three-point linkage can be moved laterally by up to 270 mm (depending on the tractor type) while driving. This means that, for example, when mowing on slopes, the incorrect cut, whether mowed twice or not mowed, can be compensated for by the mower drifting away. This investment is worth it with the first use.With M30x3.5mm internal thread in the piston rod for use on most tractors/trailers.Stroke 100 mm, installation length 345 mm, ball eye inner diameter 25.4 mm, outer cylinder diameter 105 mm, piston rod diameter 50 mm, hydraulic connections G1/2".Scope of delivery: hydraulic side brace as shown.Assembly: connect to a double-acting control valve with 2 hose lines.
Innendurchmesser: 85 mmAussendurchmesser: 97 mmLänge: 241 mm
Very compact 2-stage maneuvering jack with 30 T lifting force in stage 1 and 15 T in stage 2. Thanks to its compact design and low weight of just 24 kg, it is also ideal for use on site (flat tires), but of course also saves space in the workshop. Hydro-pneumatic drive via any commercially available compressor/compressed air system. Hard chrome-plated cylinder and high-quality seals for a long service life. Technical data:Load capacity 30/15 T Minimum height 145 mm Max. height incl. attachments: 415 mmStroke 1: 80 mm Stroke 2: 70 mm Overall length with folded handle only 485 mm
Belt with lock suitable for knife quiver item 113370. Made of TPU for a long service life. With metal chains and carabiner for sharpening steel. Easy to clean and sterilizable. 1230x35x3mm.
Adapter for direct connection to the IBC tank with extension to a hose nozzle for direct connection to a hose.Thanks to the anti-twist nut, the adapter including hose can be easily removed from the IBC. This saves you from having to turn or dismantle ~the hose. ~
CAMLOCK male part, suitable for IBC taps with a 2" coarse thread as an outlet.Is used to connect Camlock nut couplings.Connection to the IBC: S60x6 (DN50) female thread - coarseOutlet: 2" Camlock, male< br>Measured diameter: 55-62mm
Standard adapter from 2“ to 1” fine thread female threadOutlet: G1 inch female thread - fine
CAMLOCK male part for screwing directly onto a 2" fine thread.Connection to the IBC: 2" NPS (DN50) IT - fineOutlet: 2" NPT (DN50) AG - fineMeasured diameter: 57-62mm
The problem solver for connecting common click systems to an IBC system. This involves adapting a 2 inch IBC thread to a click system (Gardena connection). The small tap is screwed and easy to connect to the quick coupling system.Technical data: Connection to the IBC: S60x6 (DN50) IT - coarse, outlet: click system - ", measured diameter: 55- 62mm