Length: 150mm, spring diameter: 8-25mm, wire diameter: 0.9-3.25mm

3 - 20 mm, length 200 mm.

Made of spring steel, 5x20 - 25x90 mm.

Compression spring for handbrake lever for Steyr: T180, T80Length: 30mm, diameter: 17mm

Compression spring for starter button for Steyr: T80, T84, T86, T180aItem no. 98

Compression spring suitable for the fastening screws of the swath plate. Length 35mm, outer diameter 28mm, spring thickness 5.8mm

Compression spring suitable for the fastening screws of the swath plate. Length 36mm, outer diameter 20mm, spring thickness 4mm

Compression spring suitable for the fastening screws of the swath plate. Length 47mm, outer diameter 22mm, spring thickness 4mm

Made of spring steel, 5x20 - 25x90 mm.Refill pack in box, 1/2 assortment contents

The compression tester set for petrol engines allows you to easily measure the compression pressure of your petrol engine. The pressure gauge has a measuring range of 0 - 20 bar / 0 - 300 psi. In addition to the compression gauge, you will also receive 4 different spark plug thread adapters and 2 pressure pipes for quick measurements.Scope of delivery:Manometer: 0 - 20 bar / 0 - 300 psiHose length: 45 cmSpark plug adapter: 1 x M10 x 1.01 x M12 x 1.251 x M14 x 1.251 x M18 x 1.5 2 x pressure tube with rubber for quick measurements

Battioni &~ Pagani. ~

Transportable compressor for quick on-site use. Weight only 5.9 kg, thanks to 2 cylinders max. 150 L/min air output. Maximum pressure 8 bar, power consumption max. 45 A. Complete with 2.4 m connection cable including battery terminals, pressure hose with pressure gauge and practical transport bag.

For the exact allocation of special feed for horses. WxHxD: 31x39x28 cm.

Versatile machine, e.g. for fattening bulls or raising calves. The partition allows two animals to eat at the same time and undisturbed. Hygienic because the shape allows the animals to completely empty the trough. Easy to assemble - also due to its low weight. The amount of food is adjusted using a slider inside the container. WxHxD: 75 x 80 x 38.5 cm

pieces 4 to 12 mm, in sheet steel cassette, professional quality, for stone, concrete and masonry

Innovative Schraublösung mit selbstschneidendem Gewinde für sicheren Halt in Beton. Einfach mit Bohrhammer oder dgl. Loch vorbohren und den Schrauben direkt ohne Dübel einschrauben. Einfaches entfernen nach Bedarf mit Knarre, Schlüssel oder Schlagschrauber. Bohrlochdurchmesser bis 6 mm jeweils -1 mm, 8-12 jeweils -2 mm.

Switch-off pressure adjustable from 3 to 11 bar. 4 connections 1/4". With relief valve. For 400 volts

Blank, black unprocessed

Cone nut with thread M16x1.5 for measuring head with serrated holder for Aebi, BCS and Reform.

Cone spigot suitable for Aebi cutterhead with clamping claw and for the cutterhead for ESM municipal and universal beams. The spigot has an M10 internal thread and the cone has a diameter of 16 - 18 mm.

Suitable for countersunk head screw M12x25, Faie No. 43475. Can be used on drum mowers from Claas, Deutz-Fahr, Fella, Kuhn and Pttinger.

Conical screw M8x1x19 with wrench size 14mm. Suitable for Aebi, BCS and Reform.

Tapered screw M8x1x21 with wrench size 13mm. Suitable for Aebi, BCS and Reform.