Maximum safety meets outstanding sensitivity: This extremely lightweight and robust cut-resistant glove was specially developed for the knife hand in the food industry. Thanks to the combination of high-tech fibers and a stainless steel core, it offers the highest protection while maintaining precise tactile perception. Your advantages at a glance: Excellent tactile sensitivity: Thanks to the 13-gauge knit, the hand remains fully flexible, ideal for fine cutting work. Hygienic & clean: Absolutely fiberglass-free and washable at 95°C (boil wash) – meets the strictest standards of food processing. Secure fit: The extra-long cuff provides additional protection. Wearing comfort: Lightweight material for fatigue-free work over long periods.
Cutter head complete with cutter head cover for driving pin wrench size 20mm.
Cutter head complete with fastening screws. Suitable for Aebi BM5 and BM8 with Italian bar, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European bar.We would like to point out that Aebi and Reform have different cutter bars for this cutter head . This means that the length of the fastening screws is not sufficient. You can order a longer taper screw and knife head screw as an accessory (see also below) under the following FAIE numbers: ~ ~Taper screw M8x1x21mm, FAIE number 107996Knife head screw M8x1x20mm, FAIE -Number 107995
Cutter head cover with drive pin wrench width 20mm and total height 34.5mm - old version.
Cutter head cover with drive pin spanner width 19,5mm instead of 20mm and total height 43,5mm. This cutterhead cover can be used for advanced drift pin wear.
Cutter head cover with driving pin wrench width 20mm and total height 43,5mm.
Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.
Knife head loosely suitable for Aebi BM5 and BM8 with Italian beam, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European beam with serrated knife holder. The hole spacing of the fastening screws is 76mm from hole center to hole center. The guide roller holder has a width of 43mm.
Suitable for type RM158S, 110, 111, 111S, 112, 112K, 115, 131 from 1976
Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.
Practical, handy carpet knife, with safety lock. Complete including 9mm snap-off blade.
Handy knife with stainless steel running rail.
12 cutters, different colors, made of transparent plasticwith locking slide and snap-off blade, 18 mm
Diamond cutting disc for universal use. Cuts metal, wood, stone, glass and plastic. Bore 22.23 suitable for all common angle grinders.
Diamond cutting disc with vacuum-coated segments. Suitable for almost all materials such as wood, steel, concrete, stone, glass and plastic. Ideal for universal use. Bore 22.23mm for all commercially available angle grinders.
Diamond cutting disc with vacuum-coated segments. Suitable for almost all materials such as wood, steel, concrete, glass and plastic. Bore 22.23mm for all commercial angle grinders
1 diamond cutting disc each with a diameter of 125 mm for practically all work with tiles, clinker, concrete, brick, etc.
90 cylindrical shaft
To be placed on a Euro meat crate. 595x395x20mm. Color white (delivery without meat box).
Reproduction cylinder base gasket suitable for Stihl Stihl models: 024, 026, MS240, MS260Cylinder set with Ø 44 mm - see FAIE part no. 119515Reference numbers: 1118-029-2306, 1113-029-2305, 1113-029-2300, 11180292306, 11130292305, 11130292300
for engine WD 306 A, WD 307, WD 307.40,