Skin-friendly, sand-free, solvent-free cleaning concentrate for the heaviest dirt in industry and trade optimal hand cleaning thanks to highly concentrated detergent substances in combination with skin-friendly natural abrasive softwood flour the skin-neutral pH value helps to maintain the skin's protective acid mantle Areas of application: against medium to heavy dirt Dosage/ Application: put a small amount (2-4 g) into moistened hands and rub, continue washing with the addition of a little water until the dirt is dissolved, rinse thoroughly with plenty of water and dry well.
Content: 10 l (€3.25 / 1 l)
Ideal for processing non-rusting materials, longer service life compared to steel brushes.
Standard wire brush with steel bristles approx. 25 mm long and wooden handle
high insulation performance capsules made of ABS plastic wide, padded wire bracket made of high-quality spring steel the soft ear pads minimize head pressure and heat build-up and offer optimal wearing comfortEN 352-1 / (SNR) = 30 dB (A) / H-value = 29 dB (A) / M-value = 28 dB (A) / L-value = 23 dB (A) Other technical properties L-value: 23dB M-value: 28dB H- Value: 29dB
with soldered carbide tip and clip Other technical properties Sleeve : 6mm Material: carbide
High-performance cooling lubricant for universal use. Especially suitable for metal saws. Can be diluted up to 1:10.
Content: 5 l (€13.99 / 1 l)
Maximum safety for screws up to M20, breakaway torque up to 35 Nm, bottle 50 g.
Content: 0.05 l (€399.00 / 1 l)
Professional flat hose with a length of 20m. Inner diameter 52mm. Abrasion-resistant and stable hose for a long service life. Temperature range -30 to +80 C. Operating pressure 13 bar, burst pressure 40 bar. Complete with Storz C coupling.
Content: 20 m (€9.00 / 1 m)
Construction flat hose made of polyester braid with PU inner coating, operating pressure 10 bar. Complete with 2 Storz C couplings.
Content: 20 m (€4.00 / 1 m)
High-quality flat hose in bright orange. Good abrasion resistance and long service life. Temperature range -30 to +80C. Operating pressure 13 bar, bursting pressure 40 bar, length 20m. Complete with Storz B coupling.
Content: 20 m (€13.90 / 1 m)
Removes the most stubborn dirt and incrustations from surfaces contaminated with oils, grease, grease, coal dust, tar stains, bitumen and adhesive residue.
Content: 0.5 l (€11.12 / 1 l)
with 3-sided Japanese-style teeth · long steel back · for precise sawing · for very fine cuts · straight rattan cut
Gewerbekatalog mit 500 Seiten ausschließlich mit hochwertigen TECWERK-Produkten für den Einsatz in Landwirtschaft, Industrie und Gewerbe.
Base made of high-quality hard foam for flexible use on hard floors with practical carrying handle and storage compartment for small items Other technical features Width: 245mm Length: 490mm Material: foam (LD45) Height: 30mm
Drop-forged, hardened, and tempered · Black-lacquered head · Shaft and tiller polished to a high gloss · Edges chamfered according to specifications · With unbreakable multi-component nylon shaft
With 48 powerful and long-lasting SMD LEDs. Illumination angle can be adjusted as desired - vertically 90 and horizontally 180. In a robust housing with a practical handle. Includes Li-Ion battery (14.8V / 5.2Ah), power adapter and charge level indicator. Luminous flux 800-4500lm, IP54. Includes integrated power bank function. The all-rounder for every use!
with direct bit holder for bits 6.3 mm (1/4"), additional bit holder in the handle (magnetic), with 72 teeth.Technical features:Lever: switch lever< br>Return angle degrees: 5
repairs incorrect holes, cracks and broken threads on metal, steel, iron, cast parts, wood, stone, glass, ceramics and many hard plastics~ mechanical processing can be carried out after 30 minutes - parts can be sanded, milled, drilled and painted over Gap filling capacity 0.4 mm hand-tight after 15 minutes final strength after 24 hours temperature-resistant up to + 120 C applicable in conveyor technology, vehicle construction, container construction, electrical engineering and many other industries.
Content: 0.025 l (€398.00 / 1 l)
made of steel machined on all sides for easy marking and straightening work galvanized stop corners exposed
made of steel machined on all sides for easy marking and straightening work galvanized stop corners exposed
Made of high-quality tool steel, machined on all sides, for marking and straightening work, galvanized, stop corners exposed.
HSS-Co Form C with right-hand twist 40 Relief ground flanks Metric ISO thread DIN 13 Sheet 1 Tolerance fieldISO2 (6H) for blind hole threads for steels up to approx. 900 N/mm strength
With flat slider, surface-hardened aluminum (HRc 62), black anodized easy-to-read laser marking with vernier 0.05 mm
high-quality paint with intensive, permanent color and luminous pigment alcohol-based, odorless frost-proof, environmentally friendly long-term marking (3 - 6 months) high luminosity and opacity low risk of contamination free from heavy metals and silicones special spray head for overhead spraying with 360 special valve for identification in all positions shake vigorously before use spray distance approx. 10 - 20 cm dry after approx. 1 - 5 minutes (depending on the ambient temperature) Other technical properties Contents: 500ml Container: Spray can
Content: 0.5 l (€15.98 / 1 l)