Color: tinted green
Suitable for Steyr front and rear window
Frost monitor specially developed for use in harsh environments with splash-proof Schuko plug and coupling (IP44). The temperature range used closes the circuit with a single pole when temperatures fall to just above freezing point at approx. 3°C and opens when temperatures rise above 8°C. The cable has no power consumption!Total length 100 cmApplication:For connecting appliances which should only be switched on when there is a risk of frost and which no longer need to be operated when temperatures rise.Application examples:Heated watering troughs in agriculture (also for switching off the transformer)Infrared heat lamps (e.g. in calf igloos, calf pens, chicken coops, etc.)Frost monitor heaters in the house or garageConstruction site heatersGreenhouse heatersTechnical datamax. load: 1,000 wattsmax. current: 5 ASwitch-on temperature: 3°CSwitch-off temperature: 8°C (at 1,000 W)Degree of protection: IP68 for sensor housing, IP44 for plug and couplingCable: rubber cable 3x1.5 mm²Translated with www.DeepL.com/Translator (free version)
Frost monitoring / frost monitor / frost alarm for storage rooms with online alarm directly to your cell phone Prevention of damage caused by frost Suitable for all storage rooms with frost-sensitive goods, e.g. pesticides, vegetables, potatoes LoRa radio technology Consisting of 1 room temperature sensor, 1 gateway for data transmission and an annual license Can be extended as requiredProduct description Reliable frost monitoring in the warehouseThe room temperature sensor measures the ambient temperature in the warehouse and sends the measured values to the cloud. You are automatically alerted if the temperature falls below the set limit value. Protect your valuable stockFrost-sensitive products spoil or become unusable if the storage temperature is too low. The Onsenso frost alarm protects you from expensive damage. No power supply and no wiring required in the warehouse. The room temperature sensor is battery-operated and does not require an on-site power supply. The temperature values are sent via LoRa radio. Individual frost warning or alarmIn the management platform, you can define the temperatures at which warnings or alarms should be generated.Basis for the Onsenso remote monitoring systemWith this set, you have all the components you need to get started with Onsenso remote monitoring, including the gateway and the first annual license. You can add further sensors or measuring devices at any time and expand your system. Scope of delivery:1 ON-N01 room temperature sensor1 ON-G01 Gateway incl. power supply unit and network cable1 ON-L03 annual license for up to 3 sensorsInstruction manualTechnical data Room temperature sensor:- ABS plastic housing- Protection class housing IP67- Housing dimensions 75 x 75 x 35 mm (L x W x H)- Temperature sensor in housing- Measuring range -55 to +125 °C- Accuracy +/- 1 °C- Sensor protection class IP68- Data transmission via LoRa radio technology- Radio frequency 868 MHz- AES-128 encryption- Measuring interval / transmission interval 10 minutes- Range up to 1,000 m- Power supply via lithium battery 1 x LS14500 3.6 V- Battery life approx. 3 yearsGateway:- ABS plastic housing- Housing dimensions 101 x 74 x 43 mm (L x W x H)- LAN connection with network cable- Data transmission from the sensor via LoRa radio technology- Radio frequency 868 MHz- AES-128 encryption- Transmission interval to the server 10 minutes, critical values immediately- Power supply via 230 V power supply unitOnsenso server:- Storage of measured values- Access to real data only for customers- Server location AustriaOnsenso web portal:- User administration- Creation of gateways and sensors- Visualization of the measured values- Defining the alarmsOnsenso mobile app:- Creating the gateways and sensors- Visualization of the measured values- Defining the alarms- Alerting via push messagesPrerequisite:Stationary or mobile Internet modem from the cell phone operator with network cable connection for the gatewayATTENTION: A license is required for operation, which incurs additional costs. (The license is included in the purchase price for the first year)
The ready-to-plug heating cable for gutters and pipes meets the requirements of strength class M2 according to IEC60800:2009 to keep gutters and pipes safely frost-free. Thanks to the high heating output of 20 watts per meter, the heating cable keeps gutters, downpipes and pipes frost-free even at very low temperatures. The integrated temperature switch reliably switches the heating cable on at a temperature of +3 C and off again at +12 C.suitable for gutters with strength class M2ready-to-plug heating cable for easy installationintegrated thermostat for energy-saving usehigh protection class: IPX7incl. Protective contact plug for a high level of safetyLength of connection cable: 2mNOTE:Please note that each heating cable connection has a separate FI -Circuit breaker must be fused. (e.g. Art. No. 296099, plug-in personal safety switch)The heating cable must be protected from sharp edges, e.g. at the transition from the gutter to the downpipe, by using edge protection (Art . No. 296098)The heating cable must not touch, overlap or cross itself or another heating cable at any point. In order to permanently exclude contact, the use of suitable spacers is recommended (Art. No. 296097)Pipes, metal gutters, protective pipes and metal casings are to be protected from the metal for safety reasons Laying to ground
Content: 20 m (€3.75 / 1 m)
Keeps your water pipe frost-free up to a maximum of -45 C! Integrated frost protection thermostat (switch-on temperature approx. +5 C, switch-off temperature approx. +13 C), not suitable for heating pipes, if there is additional insulation, do not insulate the thermostat. IPX7, VDE tested.What should you pay attention to with 230 V heating cables:The water pipe must be groundedthe 230 V-heating cables are ready to plug in and can be connected to a power supply with a circuit breaker (FI switch 30 mA).The heating cables must not be shortened and should therefore be ordered in the correct length Remaining lengths can be wrapped around the pipe in turns (note that a distance between turns of at least 15 mm must be maintained) Do not kink the heating cable and keep the maximum bending radius of approx . Observe 50 mmThe heating cables can be attached to the pipe with insulating tape or carefully with cable tiesWhen used on plastic pipes, the pipe must be covered with aluminum adhesive foil (e.g . B. 120087)The pipe and the heating cable should be insulated with a maximum insulation of 13 mmThe thermostat of the heating cable (always 2m away from the plug) should be on in the coldest position of the pipe The thermostat should be kept clear of the insulationDo not use 230 V heating cables in the browsing area of animals the installation Must be carried out by a qualified specialist in accordance with VDE0100 Power: 16 W / meterDo not install unprotected in the area where the animals are browsing - use here only 24 volt heating cable! Heating cable must not be shortened!
Content: 24 m (€2.62 / 1 m)
Original Suevia! For heating the branch line made of galvanized pipe or suitable plastic. Plastic cables must be wrapped with aluminum adhesive tape.24 V, 20 W, 2 m length.
Content: 2 m (€39.98 / 1 m)
Practical measuring device for quickly and easily determining the frost resistance of your vehicle.
Frozen Kids' Watch – Learn to Tell Time with ElsaWith the Frozen kids' watch, children can immerse themselves in the magical world of Frozen – and learn to tell time along the way!The clearly designed dial with easy-to-read numbers from 1 to 12 helps children quickly learn to tell the time.The three hands (hours, minutes, seconds) make reading the time easy and playfully promote an understanding of time.The enchanting Frozen design featuring Elsa will delight young fans of the popular Disney film.Whether at kindergarten, school, or playing with friends – this watch is a loyal companion and a real eye-catcher.The soft silicone strap is skin-friendly, flexible, and comfortable to wear.It can be perfectly adjusted to the wrist using the 8 adjustment holes,for a secure fit, even during wild adventures in the snow or summer.Recommended for children from around 4 years old who want to wear their first watch – with magic, color, and lots of fun.
The fruit berry press is ideal for processing berries and grapes. You can use it to make fresh juices, purees or even bases for jams and jellies. Whether raspberries, currants, blackberries or grapes - the fruit berry press is an all-rounder in the kitchen.The gentle pressing preserves the valuable ingredients of the berries.With the plastic masher and the screw clamp, operation is uncomplicated.Consists of Robust gray cast iron material and is not dishwasher safe.
Stackable fruit and vegetable box with 'Organic-Tools' relief logo on both sides. Comfortable to carry thanks to ergonomic, large handles. Also suitable for hazelnuts and walnuts due to small openings. Stackable euro pallet sizes. Insensitive to acids and alkalis. Tasteless and odorless. Food safe. Cold and heat resistant from -40 to +80C. UV-resistant. Color yellow. Volume approx. 35 liters. Empty weight 1,400 g. 600x400x170mm.
Stackable fruit and vegetable box with 'Organic-Tools' relief logo on both sides. Comfortable to carry thanks to ergonomic, large handles. Also suitable for hazelnuts and walnuts due to small openings. Stackable euro pallet sizes. Insensitive to acids and alkalis. Tasteless and odorless. Food safe. Cold and heat resistant from -40 to +80C. UV-resistant. Color yellow. Volume approx. 35 liters. Empty weight 1,400 g. 600x400x170mm.
Stackable fruit and vegetable box with 'Organic-Tools' relief logo on both sides. Comfortable to carry thanks to ergonomic, large handles. Also suitable for hazelnuts and walnuts due to small openings. Stackable euro pallet sizes. Insensitive to acids and alkalis. Tasteless and odorless. Food safe. Cold and heat resistant from -40 to +80C. UV-resistant. Color yellow. Volume approx. 35 liters. Empty weight 1,400 g. 600x400x170mm.
Healthy pleasures in a varied variety: Fresh fruit juices instead of industrial products with standardized tastes! Carefully preserved, homemade fruit juices delight even in the cold season and bring the scent of summer and autumn harvest into the winter. Step by step from harvest or purchase to the final product: steam juicing or cold pressing, naturally cloudy and clarified juices , making nectar with or without pulp, syrup and fruit jelly, proper preservation and storageBlack elderberry juice, cherry or gooseberry juice, strawberry, lemon balm and apple-raspberry juice... Homemade peach iced tea!Sweet cider made from grapes, apples and pearsFruit juices from rare local fruits such as sloes, quinces, sea buckthorn or cornelian cherries...Creep - and lemon balm syrup~ blackberry gin and elderberry cinnamon jelly~ Pineapple Lemon and Peppermint Lemonade...
With this fruit chopper you can chop your fruit to an ideal size for subsequent pressing. All parts that come into contact with the fruit are made of stainless steel and are very easy to clean. The device has a plate with non-slip rubber feet and is simply placed on the edge of the table to operate. (If necessary, please attach to the table with a screw or clamp) Motor power: 0.18 kW / 1500 rpm Working capacity: 200 - 300 kg/hour Dimensions: 26 x 32 x 42 cm Weight: 10 kg Voltage: 230 V
The powerful fruit chopper with inlet funnel chops your fruit to the ideal size for subsequent pressing or mashing. All parts that come into contact with the fruit are made of stainless steel and are very easy to clean. The large funnel makes it easy to pour in the fruit. The device has a plate with non-slip rubber feet and is simply placed on the edge of the table to operate. (If necessary, please attach to the table with a screw or clamp)Motor power: 0.55 kW / 1500 rpmWorking performance: 400 - 600 kg/hourDimensions: 34 x 42 x 51 cmWeight: 20 kgVoltage: 230 V
Made of stainless steel, with pre-shredder and grinder blade made of stainless steel. Chops the fruit for optimal juice yield, stable on a tripod with an internal electric motor with a safety limit switch, the filling funnel is removable. Size 600x1200 mm, performance up to 400 kg/h, electric motor 1.35 kW, 230 volts, weight 22 kg.
Hand-operated fruit mill for smaller quantities of fruit. Also suitable for apples and pears thanks to the additional shredding shaft. Weight approx. 20 kg.
This fruit preparation in a pasteurized 3 kg container is designed for refining yogurt, curd cheese and desserts with a natural fruit flavor without synthetic colorings or flavorings. The formulation is suitable for professional use in dairies, direct marketing and food production. Advantages & Functions • Pasteurized filling improves product safety and shelf life • Free from preservatives and artificial colors or flavorings • Suitable for yogurt, curd cheese and dessert applications with flexible dosing Frequently Asked Questions What is the recommended dosage for yogurt? The recommended dosage for yogurt is 16–20%. What dosage is recommended for curd cheese? The recommended dosage for curd cheese is 12–15%. Are custom varieties available? Custom fruit varieties and organic versions are available on request.
Content: 3 kg (€9.33 / 1 kg)