Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection. Flow max.: 45 L/min. Operating pressure: 250 bar max. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8"~Screw-in thread P2, T2: R1/2"~H=Raising, 0=Middle position, S=Lowering, SW=Floating position, ELG=Rapid traverse, R=with detent.The switching positions listed depend on the respective model of the control valve.

With notch in lifting and hydraulic limit switch.Specially for use in log splitters. With basic position in lifting for mechanical limit switch. The auto-speed function reacts to the different splitting pressure and switches the splitting speed independently. During the idle stroke, the valve switches to the maximum speed possible due to the pump performance. During the splitting process, the valve automatically switches to the highest possible pressure. This results in the maximum splitting force. If the piece of wood has already been split, the splitting force is reduced and the valve automatically switches back to maximum speed. Technical data:max. Flow 60 L/minwith auto-speed function max. flow at connection A 100 L/minauto-speed function 70 barmax. Pressure preset 200 barNo pressure transfer possible! This valve should be the last one.

With basic position in lifting and with actuating pin for mechanical limit switch.Specially for use in log splitters. With basic position in lifting for mechanical limit switch. The auto-speed function reacts to the different splitting pressure and switches the splitting speed independently. During the idle stroke, the valve switches to the maximum speed possible due to the pump performance. During the splitting process, the valve automatically switches to the highest possible pressure. This results in the maximum splitting force. If the piece of wood has already been split, the splitting force is reduced and the valve automatically switches back to maximum speed. Technical data:max. Flow 60 L/minwith auto-speed function max. flow at connection A 100 L/minauto-speed function 70 barmax. Pressure preset 200 barNo pressure transfer possible! This valve should be the last one.

with catch in liftingSpecially for use in log splitters. With catch in lifting for mechanical limit switch. The auto-speed function reacts to the different splitting pressure and switches the splitting speed independently. During the idle stroke, the valve switches to the maximum speed possible due to the pump performance. During the splitting process, the valve automatically switches to the highest possible pressure. This results in the maximum splitting force. If the piece of wood has already been split, the splitting force is reduced and the valve automatically switches back to maximum speed. Technical data:max. Flow 60 L/minwith auto-speed function max. flow at connection A 100 L/minauto-speed function 70 barmax. Pressure preset 200 barNo pressure transfer possible! This valve should be the last one.

With mechanical limit switchMechanical actuation with spring return in standard version. The middle position is designed with a pressureless circulation and the ports A, B, P, T are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides. Standard version of the valves in parallel connection.Version: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H=Raise, 0=Middle position, S=Lower, SW=Floating position, ELG=Rapid traverse, R=with detent.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: ~ R3/4?H=raise basic position, 0=middle position, S=lower, ELG=rapid traverse.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: ~ R3/4?HR=Raise locked, 0=Middle position, S=Lowering, ELG=Rapid traverse.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H=Raise, 0=Middle position, S=Lower.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H=Raise, 0=Middle position, S=Lowering, SW-R=Floating position locked.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H=Raise, 0=Middle position, S=Lowering, SW=Floating position, ELG=Rapid traverse, R=with detent.The switching positions listed depend on the respective model of the control valve .

Electromagnetic actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?HR=Raise, 0=Middle position, S=Lower.The switching positions listed depend on the respective model of the control valve.

Electromagnetic actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection. Version: BM70 Flow max.: 80L/min Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H=Raise, 0=Middle position, S=Lowering, SW=Floating position, ELG=Rapid traverse, R=with detent.The switching positions listed depend on the respective model of the control valve .

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Control slide doubleacting DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow rate max.: 80 L/min .Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Control slide doubleacting DW-SWR: H=lifting, 0=middle position, S=lowering, SW-R=floating position lockedStandard version of the valves in Parallel connection.Flow max.: 80 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew thread A, B, P , T,: R1/2?screw-in thread P2, T2: R3/4?The switching positions listed are depends on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW-SWR: H=Raise, 0=Middle position, S=Lowering, SW-R Floating position locked2. Control slide doubleacting DW-SWR: H=raise, 0=middle position, S=lower, SW-R floating position lockedStandard version of the Valves in parallel connection.Flow max.: 80 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?The switching positions listed depend on the respective model of the control valve.

With mechanical limit switch

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 150 bar, adjustable from 50-350 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T1, T2: R3/4? H=Raise, 0=Middle position, S=Lowering.The switching positions listed depend on the respective model of the control valve.

with the matching attachment kit for Cat.

FIAP replacement conveyor belt for automatic feedersReplace worn conveyor belts quickly and easily with this original replacement set for FIAP automatic feeders.Suitable for all 3 kg and 5 kg models in the standard and professional versions. 

Peel, mash, beat until fluffy... It simply tastes best when made at home! Here, young chefs learn the most important cooking and baking methods in no time and can try out great recipes right away. Whether fruit smoothies, sandwiches, fried chicken or strawberry tarts - in Cook! kids can choose between 100 delicious recipes for breakfast, snacks, salads, main courses and sweets. Suggestions for variations encourage little chefs to come up with their own ideas and creations. Detailed instructions show each step, picture by picture, until the finished dish. From the preparation and processing of ingredients to important kitchen appliances and hygiene, the kitchen basics are explained in the introductory part using many pictures. Tips on healthy eating round off the cooking school for kids. 128 pages, 216 x 276 mm, hard cover, color illustrations throughout, ages 8 and up

Versatile cookie cutter set of 4 - ideal for baking cookies, cookies or fondant decorations. The shapes are made of stainless metal, are easy to clean and ensure clean contours. Perfect for baking fun with children or creative kitchen projects. Set of 4:1 gingerbread man approx. 6 x 4.5 x 2.5 cm, 1 boot 6 x 3.5 x 2.5 cm, 1 Christmas tree 6 x 5.5 x 2.5 cm, 1 star 6.5 x 6 x 2.5 cm

Bake cookies quickly and practically - they're ready in no timeWith 8 different nozzles and 13 aluminum matrices,There are no limits to your imagination when shaping and decorating.High quality.

Cooking tine from European production. ~ The tine material has a width of 25mm and a thickness of 8mm.

for the front row, tine material 25x8.