​Robust hose reel with automatic rewind and locking mechanism for easy operation.Sturdy steel frame for heavy-duty use. Mounts to the floor, ceiling, or wall using the two large guide rollers.Equipped with a high-quality 30 m PU mesh hose with a 9.5 mm inner diameter and a 20 bar operating pressure.1/4" male thread connection compatible with standard DL couplings (e.g., part no. 7378).Complete with a 1-meter connection cable and quick-connect fitting.

With adjustable exhaust air outlet For making boxes, disposable pallets, crates, frames, partitions, racks, formwork and for attaching gypsum fiber boards With rubberized handle, cold-insulating, Non-slip and vibration-reducing With bottom loader magazine and contact protection Special features:For strip-bound nails 55-90 mm with an angle of 34 degrees and a diameter of 2. 87 mm, 3.05 mm and 3.33 mmAir requirement: approx. 4.8l/shotWorking pressure: approx. 6bar Weight: approx. 4.5kg Connection: 1/4"~

Powerful tool for quickly and precisely removing rust from metal, knocking off paint, removing plaster and concrete residue, working on stone, etc. Long service life thanks to the metal design with 12 needles made of special steel. Stroke rate 3800 min, air requirement approx. 170 L/min, weight only 1.2 kg.

With 1 liter container and rigid 300 mm long spray pipe, adjustable spray valve. Now with a large filling opening.

DescriptionClamping devices for fastening foil, fabrics, leather, wall coverings, insulating materialsAlso ideal for interior work, especially for fastening tongue and groove boards, profiles, strips, chipboard, etc.< /li>With rubberized handle, cold-insulating, non-slip and vibration-reducingWith bottom loader magazine and contact protectionIn a practical plastic case Special features: Combination device with adjustable exhaust air outletUsable clamps from 16 - 40 mm type 90Usable nails from 20 - 50 mm type F Technical dataAir requirement: approx. 0.6l / shotWorking pressure: 6bar Weight: 1.6kg suitable clamps: 16-40mm type 90 suitable nails: 15-50mm type F

High-quality stapler in a practical PVC case. The large spine width (13 mm) makes it ideal for attaching foil, fabrics, leather, insulating material, etc. Clip size max. 16 mm.

Maximum, robust equipment and best quality at an affordable priceFully automatic on/off operationWith all safety devicesCompletely ready for connection, quality electric motorQuality electric motor with high starting torque is equipped with a motor protection switchStarting capacitor and starting relief valve ensure easy startingWith phase inverter as standard for easy manual reversal of the direction of rotationCompressed air compression via high-performance HOS unitThe start-up relief valve ensures easy and unpressurized start-upThe two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation and a long service lifeThis ensures an even longer service life due to even less wear and tearHigh-quality compressor with optimum lubrication for a long service life and high reliabilityEquipped with high-quality intake filterThe aftercooler with large cooling fins ensures a low boiler inlet temperature and therefore less moisture in the compressed air, which protects the compressed air toolsAdditionally with intercooler to the aftercoolerCorrosion-free valve plates for improved heat dissipation and compressor longevity The large fan wheel and a cooling air baffle on the cylinder ensure optimum cooling of the compressorA sturdy metal belt guard ensures optimum protection of the components and a high level of user safetyCompressed air supply to the boiler via flexible armored hose line with heat protection prevents vibration breakageHigh-quality drive beltPowerful and economical driveThe toothed drive belt makes starting easier, improves smooth running and power transmission and reduces power consumption by up to 30%Sturdy metal belt guardOperation on the maintenance blockEquipped with a high-quality CONDOR MDR 5 pressure switch with robust push-button function for fully automatic on/off operationFilter pressure regulator for infinitely variable adjustment of the working pressure, with simultaneous dirt, oil and condensation water separationTwo large pressure gauges indicate the tank and working pressureAir tapping at the maintenance block via a convenient safety quick-release couplingOn the maintenance block only fixed screw connections, no hose connectionsTwo compressed air tapping pointsOne compressed air outlet for filtered compressed airOne compressed air extraction point via direct outlet on the boiler with ball valveComfort safety coupling - The advantages.Comfort safety couplings from AIRCRAFT are the first manufacturer to use them as standardTwo separate locking systems for maximum work safetyDangerous whipping of the hose line is preventedComfortable and safe to transport and set upErgonomically extended handle for comfortable transportation in an almost upright position - strain on the back due to lifting is avoidedPuncture-proof PU foam wheels and stable steering chassis with parking brake enable easy transportationThe parking brake prevents both turning and rolling movements of the wheels and ensures that the compressor stands perfectly stillWith practical second transport handle on the tank, which makes it easier to carry the compressorHigh-quality tank with durable rust protectionAIRCRAFT is the first manufacturer to equip the AIRPROFI series compressors with hot-dip galvanized boilers inside and out as standardThe AIRPROFI series boilers therefore come with a 15-year guarantee against rusting through.

Portable oil-free piston craftsman's compressor with a weight of only 9.2kg.Can be used universally in assembly, home and hobby areas with automatic on and off operation.Due to the low Lightweight, easy to carry and easy to use.The integrated electric motor is equipped with a motor protection switch. Compressed air tank with 6 liters powder-coated, with rubber feet or suction cups at the front, power cable 1.8m long.Includes one-hand quick coupling, pressure reducer, automatic pressure switch, and pressure gauge for tank and working pressure.Technical dataCompression system: WDSMaximum flow volume: 180 l/minFilling capacity approx.: 90 l/minMaximum pressure: 8 barContainer capacity: 6 lCylinder/stages: 1/1Speed: 3400 min-1Motor power: 1.1 kWConnection: 230 VWeight: 9.2 kgDimensions ( L x W x H): 315 x 355 x 370 mmSound power level LWA: 97 dB(A)

Mobile piston compressor with belt driveTwo-cylinder high-performance units made of gray cast iron for a long service lifeLarge fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressorQuality electric motor with high tightening torqueElectric motor equipped with motor protection switchAftercooler with cooling fins ensures a low container inlet temperature and thus less moisture in the compressed airStable belt grid protection made of metalStarting capacitor and starting relief valve ensure easy starting on 230 volt models400 volt models as standard with phase inverter for easy manual reversal of the direction of rotationCompressed air tank equipped with safety valve, tank pressure gauge and condensate drain valveInclusive of all safety devicesCompletely ready for connectionFilter pressure regulator with a pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for container pressureTen-year guarantee against rust through on powder-coated compressed air tanksIncludes high-quality composite safety coupling and high-quality CONDOR pressure switchFlexible armored hose line with heat protection for a long service life without vibration breakage< li>Ergonomic handle, rubber handle and transport handle on the compressed air tank for comfortable transportStable steering chassis with parking brake in conjunction with large, puncture-proof wheels for comfortable transportThanks to the two-stage compression 2-cylinder -High-performance unit with very low speed, a particularly quiet and low-vibration operation is achievedThis ensures a longer service life due to less wear In addition with an intercooler for the aftercooler Compressor system : HOS Suction capacity approx.: 650l/minFilling capacity approx.: 520l/min Explanation of filling capacity at: 6 bar working pressureNumber of cylinders: 2 Number of compression stages: 2Compressor speed: 950min Compressed air tankMaximum pressure: 10bar Tank capacity: 100l

​Compact compressor with a 2-cylinder, 2-stage high-performance unit with approximately 620 L/min suction capacity and a filling capacity of 520 L/min (at 6 bar).Also suitable for demanding DL tools.Electric motor with 4.8 kW/6.5 HP at 400 volts. Slow compressor speed of only 950 rpm for quiet operation and a long service life.The compact 90 mm reservoir and high-quality chassis also make it suitable for mobile use.Very powerful compressor with high-quality CONDOR pressure switch and composite safety clutch at a special price.

​DIY compressor with a single-cylinder unit and oil lubrication system for a long service life.With an intake capacity of approximately 300 L/min and a 50 L reservoir, it is also suitable for temporary increases in air demand.Motor with 2.0 kW/2.75 HP at 2800 rpm and 230 volts.Compact design with large wheels for easy transport and stability.Fully equipped with a pressure switch, pressure reducer, and reservoir and working pressure gauges.Dimensions: 800 x 360 x 750 mm (L x W x H).Weight: approximately 35 kg.Durable DIY compressor with an optimal price/performance ratio.

Can be used for any compressor.

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 320 L/min, speed 1420 rpm, required. Motor power 1.8 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.5 L.

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 365 L/min, speed 1370 rpm, required. Motor power 2.2 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.75 L.

Cast iron compressor with 2 cylinders with aftercooler, suction capacity 556 L/min, speed 1440 rpm, required. Motor power 4.0 kW. Complete with filter and fan wheel 280x13 mm. Oil filling quantity 0.9 L.

Cast iron compressor with 2 cylinders and 2-stage compression, suction capacity 820 L/min, speed 1215 rpm, required. Motor power 5.5 kW. Complete with filter and fan wheel 398x9.5 mm. Oil filling quantity 1.34 L.

​​Powerful pump for well water – efficient and reliableThis pump is ideal for using well water, for example, for garden irrigation or domestic water supply (an additional pressure tank is strongly recommended).Thanks to integrated pressure and flow sensors, it starts automatically when water is drawn and then shuts off automatically – without any manual intervention.The multi-stage impeller technology ensures high water pressure, even at high discharge heads.An integrated dry-run protection prevents damage in the event of a lack of water supply.The thermal protection also protects the pump from overheating.The high-quality stainless steel housing is particularly robust and durable.A built-in check valve reliably prevents water from flowing back.Ideal for anyone looking for a reliable and low-maintenance solution for using well water.Dimensions and Weight:Length: approx. 98 mmWidth/Depth: approx. 98 mmHeight: approx. 900 mmWeight: approx. 13.59 kgDrive:Motor power: 1.1 kWMotor protection class: IPX 8Connection cable length: 22 mElectrical specifications:Connection voltage: 230 VMains frequency: 50 HzPump:Area of ​​application: Clear waterMaximum discharge head: 55 m (5.5 bar)Flow rate: 6000 l/hInlet/outlet diameter: 25 mmMaximum particle size: 1.2 mm

​Professional tire inflator with digital display and a measuring accuracy of 0.01 bar, measuring range 0.2 - 10.0 bar,Excellent readability thanks to large digits and illuminated display, robust design with rubber coating and integrated hanging loop,Dustproof and waterproof to IP65.Complete with 500mm hose and quick-release fastener for one-handed attachment and removal, as well as a secure fit on the valve.

​High-quality submersible pump with a stainless steel housing and a power output of 750 watts / 230 volts.Pumps up to 11,400 L/min and can handle particles up to 30 mm in size. Maximum delivery head: 7.5 m (0.75 bar).Equipped with a float switch and a universal hose adapter.A practical flood control kit for pumping out basements, pools, construction pits, etc.Complete with a 15 m C-shaped flat hose, matching C-coupling for the pump, transport basket (which doubles as a pump housing), and pre-filter.

Simple bleeding at the coupling, no whipping of the hose line, easy coupling. High quality steel construction.

Robust professional demolition hammer for wall breakthroughs and renovation work.For universal use in tiling, chipping, chiseling work, in construction and in the bodywork areaWith ergonomically shaped handle, cold-insulating and low-vibrationLength: 450 mm< br>Gross weight: 6.9 kgAverage air requirement, approx. 600 l/minImpact strength: 28 joules

Oil and water separator pressure regulator, including pressure gauge, max. primary pressure 16 bar. Manual condensation drain, with wall mounting bracket.

For all 2 cylinder units, complete with union nut.