Schröckenfux | | Large selection |

Products of Schröckenfux

Franz de Paul Schröckenfux Ges.m.b.H.
Rossleithen 72
A- 4575 Rossleithen
[email protected]

#FA25687

Schröckenfux Knife back 160 cm, with oval hole Knife back 160 cm, with oval hole

Suitable for type RM158S, 110, 111, 111S, 112, 112K, 115, 131 from 1976

€45.00*

#FA25673

Schröckenfux Knife back 5' (163cm) for 20 blades, suitable for Busatis and Steyr Knife back 5' (163cm) for 20 blades, suitable for Busatis and Steyr

Suitable for Steyr T80, T84, T86 with original Busatis or Steyr side mowers

€41.90*

#FA7678

Schröckenfux Knife back for knife head N35, 1800 mm Knife back for knife head N35, 1800 mm

€45.00*

#FA25685

Schröckenfux Knife back with threaded hole 145 cm Knife back with threaded hole 145 cm

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

€39.90*

#FA25689

Schröckenfux Knife back with threaded hole 160cm Knife back with threaded hole 160cm

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

€45.00*

#41919

Schröckenfux Knife blade 2 mm Knife blade 2 mm

Version: gezahnt

Blade N36/5g serrated, 75x58x2mm - narrow mortar blade. This type of blade was installed on the UNI-Rasant and UNI-Florett mowers.

From €1.13*

to the product

#27381

Schröckenfux Lens countersunk head rivets for Busatis Germany Lens countersunk head rivets for Busatis Germany

Piece: 200 Ø x length (mm): 6x18

Lens rivets suitable for Busatis and ESM double knife mowers. The rivets have a countersunk angle of 75.

Variants from €14.90*

€32.90*

-34 %

#FA25672

Schröckenfux M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

#FA56598

Schröckenfux Mähmesser zu Moty Gigant III mit Bidux Mähwerk Mähmesser zu Moty Gigant III mit Bidux Mähwerk

Untermesser, 30 Klingen, davon 5 Pilzklingen 100343

€389.00*

#FA56596

Schröckenfux Mähmesser zu Moty Gigant III mit Bidux Mähwerk Mähmesser zu Moty Gigant III mit Bidux Mähwerk

Obermesser, 30 Klingen, davon 6 Pilzklingen 100346

€379.00*

#FA105980

Schröckenfux Mower blade 120 cm, 16 blades DIN 80, 4 pcs. Cleaning plates, instead of Agria 631374 Mower blade 120 cm, 16 blades DIN 80, 4 pcs. Cleaning plates, instead of Agria 631374

Mower blade with 16 blades suitable for the ESM centre cut finger bar mounted on Agria motorised implements with sliding block drive. The cutter head is attached to the blade on the reinforcement bar with 4 M8 screws at a distance of 101 and 177 mm. There are 4 cleaning plates on the mower blade. The cleaning plates are positioned above the 2nd, 6th, 11th and 15th blade.

€132.00*

#FA48799

Schröckenfux Mower blade 122 cm, 16 blades, 4 guide blades GB543, 2 threaded holes M8 with hole spacing 101 mm, instead of Vogel & Noot FG211400 Mower blade 122 cm, 16 blades, 4 guide blades GB543, 2 threaded holes M8 with hole spacing 101 mm, instead of Vogel & Noot FG211400

Mower blade for finger bar Vogel & Noot Plus mower. The mower blade has a length of 122 cm with 16 blades. There are 4 guide blades GB543 on the 2nd, 6th, 11th and 15th blade. The hole spacing of the M8 mounting holes is 101 mm.

€115.00*

#FA919

Schröckenfux Mower blade 137 cm, 18 blades DIN 80, 4 pcs. Cleaning plates, instead of Agria 631375 Mower blade 137 cm, 18 blades DIN 80, 4 pcs. Cleaning plates, instead of Agria 631375

Mower blade with 18 blades suitable for the ESM centre cut finger bar mounted on Agria motorised implements with sliding block drive. The cutter head is attached to the blade on the reinforcement bar with 4 M8 screws at a distance of 101 and 177 mm. There are 4 cleaning plates on the mower blade. The cleaning plates are positioned above the 2nd, 7th, 12th and 17th blades.

€142.00*

#FA2314

Schröckenfux Mower blade 140cm, 18 blades DIN 80, instead of Agria 63-02-72 Mower blade 140cm, 18 blades DIN 80, instead of Agria 63-02-72

Total number of blades 18 pieces, 13 blades DIN 80, 5 blades 60-02-09, 4 cleaning plates 50-03-10

€119.00*

#FA48800

Schröckenfux Mower blade 140cm, 18 blades, 4 guide blades GB543, 2 threaded holes M8 with hole spacing 101 mm, instead of Vogel & Noot FG210400 Mower blade 140cm, 18 blades, 4 guide blades GB543, 2 threaded holes M8 with hole spacing 101 mm, instead of Vogel & Noot FG210400

Mower blade for finger bar Vogel & Noot Plus mower. The mower blade has a length of 140 cm with 18 blades. There are 4 guide blades GB543 on the 3rd, 7th, 12th and 16th blade. The hole spacing of the M8 mounting holes is 101 mm.

€119.00*

#FA65860

Schröckenfux Mower blade 145cm 19 blades DIN 75 instead of Aebi AM46099/1 Mower blade 145cm 19 blades DIN 75 instead of Aebi AM46099/1

19 blades DIN 75, 4 cleaning plates AM23328/2 on 7th/8th. Blade, 5 outer blades on the right and left with sunk rivets at the top, driver plate 46092/1, 2 threaded holes M8, LA = 101 mm

€127.00*

#FA115729

Schröckenfux Mower blade 145cm 19 blades DIN 75 instead of Aebi AM46099/2 Mower blade 145cm 19 blades DIN 75 instead of Aebi AM46099/2

19 blades DIN 75, 6 cleaning plates AM23328/2 on 2nd, 5th, 8th, 12th, 15th and 18th blade, driver plate 46092/1, 2 threaded holes M8, LA=101 mm

€129.00*

#FA2039

Schröckenfux Mower blade 160cm, 21 blades DIN 75, instead of Aebi AM28294/1 Mower blade 160cm, 21 blades DIN 75, instead of Aebi AM28294/1

Mower blade suitable for Aebi cutter bars with additional cutting unit on the left and right side. The cutter bar has 21 DIN 75 blades with 4 cleaning plates AM8731/2. The cleaning plates are riveted onto the 8th, 9th, 13th and 14th blade. The rivets for the counter-blade of the additional cutting unit are ground on the left and right of 5 blades each. The cutter head is clamped onto the AM8880/1 drive plate. Austrian quality product

€127.00*

#FA52949

Schröckenfux Mower blade 160cm, 21 blades, 6 cleaning plates, 2 threaded holes M8, LA=122.5mm instead of Rapid 253012 Mower blade 160cm, 21 blades, 6 cleaning plates, 2 threaded holes M8, LA=122.5mm instead of Rapid 253012

The mower blade for the Rapid finger bar has 21 blades. There are 6 cleaning plates 14902 riveted onto the blades. The cleaning plates are fitted over the 2nd, 5th, 8th, 14th, 17th and 20th blades. There are two M8 threaded holes in the back of the blade with a hole spacing of 122.5 mm. The cutter head is attached to the mower blade in these threaded holes.

€105.00*

#FA126206

Schröckenfux Mower blade 160cm, 21 blades, 8 cleaning plates, 2 threaded holes M8, LA=122.5mm instead of Rapid 253012 Mower blade 160cm, 21 blades, 8 cleaning plates, 2 threaded holes M8, LA=122.5mm instead of Rapid 253012

The mower blade for the Rapid finger bar has 21 blades. There are 8 cleaning plates 14902 riveted onto the blades. The cleaning plates are fitted over the 2nd, 5th, 6th, 8th, 14th, 16th, 17th and 20th blades. There are two M8 threaded holes in the back of the blade with a hole spacing of 122.5 mm. The cutter head is attached to the mower blade in these threaded holes.

€115.00*

#FA7833

Schröckenfux Mower blade 165cm, 21 blades, instead of Steyr-PHANTOM 192720612 Mower blade 165cm, 21 blades, instead of Steyr-PHANTOM 192720612

Mower blade suitable for Steyr original Phantom cutter bars. The mower blade has 21 blades and is supplied complete with the cutter head 192720212.21 blades 192720252 serrated, 1 spring plate 192720295, 1 cutter head 192720212Austrian quality product