Electrically driven centrifugal pump 12 VDC or 18 VDC with CAS battery system for diesel, heating oil, AdBlue® urea solution and water as a submersible pumpThe centrifugal pump with DC motor is intended for pumping the following liquids in compliance with the operating conditions specified in section 3.3:Liquids with flash point > 55 °C and viscosity < 20 cSt, e.g.- diesel fuel- biodiesel- EL heating oil- Urea solution AUS 32 (AdBlue®)- waterAny other or additional use is not intended.Technical data: Pump 12 VDC Pump 18 VDCVoltage: 12 VDC +/- 10% 18 VDC +/- 10%Fuse: 25 A -Power: 220 W 220 WCurrent consumption in normal operation: 16 A 12 ACurrent consumption with closed dispensing valve: 18 A 13.5 AProtection class: IP 68 IP 68Power supply: via battery or power supply unit with safety transformer via CAS batteryHydraulic data(with water, 20°C)Delivery pressure: max. 1.1 barZero flow rate: 40 l/minDelivery rate under nominal conditions: approx. 25 l/minOperating conditionsTemperature range: - 20 °C to + 60 °CDimensions and weightDiameter: 56 mmLength: 185 mmWeight: 0.65 k
Automatic fuel nozzle, suitable for urea AdBlue. Includes swivel joint, plastic/stainless steel gun. Connection nozzle DN19.
Galvanized shelf for the safe and approved storage of small containers or up to 2x60 liter barrels, easy to remove through horizontal storage. GRP tub with 65 L collecting volume. Dimensions: 42x82x131cm.
Practical boot cleaner made of high-quality, age-resistant polyethylene - light and stable. Stainless steel pipes, complete with 3 fixed and one movable brush. With integrated collection tray for collecting and draining the dirty water that runs off. With grab handles. Dimensions: 52 x 47 x 90 cm, weight approx. 15 kg. Water connection 1/2".
Cost-effective entry-level solution Low-wear centrifugal pump Electric motor 12 V, max. 20 A Self-priming as a submersible pump on the bottom of the container User-friendly, compact, lightweight designVolume flow approx. 25 l/min with nozzle and 4 m hoseExternal dimensions of the pump: length 160 mm, 56 mm
Cost-effective universal pump for diesel/biodiesel, Ad/Blue (separate tap required) or water. The submersible pump can simply be inserted into the bunghole of a 200 l barrel or similar. The standard bunghole adapter ensures a clean and tight connection. Ideal for containers with 2?BSP and S70x6 thread but can also be used universally for other containers.Complete set with pump, 4m hose, 4m cable with switch and pole pliers as well as automatic nozzle for diesel. Technical data: performance. approx. 30 L/min, external dimensions of the pump 160x56mm (LxD.
Charger L2830MS for DT-Mobil Easy 460l and 600l. 220 - 240 VAC, 3A charging current. Charging time approx. 1.5 hours with temperature control and diagnostic function.
The new benchmark as a crank pumpSolid construction for professional operationHousing made of stainless steel and technopolymerBarrel adapter with connection thread S56x4Multi-part suction pipe 1 m , can be shortened individuallyPVC dispensing hose 3 mStainless steel outlet pipe 19 mm with protective capFlow rate 0.38 l/stroke
Protects your vehicles from contaminated fuel. Filter fineness 5 m. Installation (2x1" IT or O-ring flange) can be done on both the suction and pressure sides (recommended). Flow rate max. 100 L/min, complete with 2 filter inserts.
Double-walled single tank made of galvanized sheet steel with HDPE inner container. Capacity 998 L. Complete with fill level indicator, visual leak indicator, carrying handles and galvanized base frame. Dimensions: 128x76x142 cm.Please clarify in advance with your responsible authority (e.g. municipality) whether this tank fulfills the individual requirements for operation.In Switzerland:A basic approval for Switzerland is not given!
Diesel tank with inner container made of HDPE plastic and galvanized sheet steel.Outer shell serves as a spill containment tray.Very robust design with a sheet steel pallet for transport according to ADR 6.5.4.4.1b using a forklift, pallet jack, or similar equipment.Capacity: 998 liters.Complete with leak and level indicators.
Mobile diesel tank system in accordance with ADR 6.5.4.4.1b and ADR 6.5.4.4.2b (recurring inspection after 2.5 years) with a capacity of 620 L.Polyethylene tank with a hinged lid and crane eyes for easy transport and loading.Filling nozzle, nozzle holder, and integrated ventilation with pressure relief.Supplied fully assembled including a 40 L/min 12-volt pump, a 3/4" 4 m outlet hose, and an automatic nozzle.Dimensions: 118 x 80 x 103 cm (L x W x H),Net weight: 48 kg.
Mobile tank system according to ADR 6.5.4.4.1b and ADR 6.5.4.4.2b (tested after 2.5 years) with a capacity of 980 L.Container made of high-quality polyethylene with an integrated baffle.Optimal shape with integrated stacking pocket and crane eyes for easy transport and loading.Hinged lid protects the pump and hose. The tank is supplied complete with a 12/24 volt 35/70 L/min pump,a 4 m discharge hose, and an automatic nozzle.Dimensions: 127 x 107 x 112 cm (L x W x H),Weight: 107 kg.Supplied fully assembled.
Mobile Tankanlage nach ADR 6.5.4.4.1b und ADR 6.5.4.4.2b ( Prüfung nach 2 1/2 Jahren) mit 980 L Inhalt.Behälter aus hochwertigem Polyethylen mit integrierter Schwallwand.Optimale Form mit integrierter Stapeltasche und Kranösen für einfachen Transport und einfaches Verladen.Klappdeckel als Schutz für Pumpe und Schlauch, der Tank wir komplett mit Pumpe 72 L/min 230Volt, Auslaufschlauch 4 m und automatischer Zapfpistole geliefert.Maße: 127 x 107 x 112 cm LxBxH,Eigengewicht: 107 Kg.Lieferung komplett montiert.
Mobile tank system according to ADR 6.5.4.4.1b and ADR 6.5.4.4.2b (tested after 2.5 years) with a capacity of 980 L.Container made of high-quality polyethylene with an integrated baffle.Optimal shape with integrated stacking pocket and crane eyes for easy transport and loading.Hinged lid protects the pump and hose.Premium version complete with 8 m discharge hose on an integrated hose reel, flow meter, water separator, and automatic nozzle.12/24 volt pump with a flow rate of 35/70 L/min.Delivered fully assembled.Dimensions: 127 x 107 x 112 cm,Weight: 130 kg.
Mobile tank system according to ADR 6.5.4.4.1b and ADR 6.5.4.4.2b (tested after 2.5 years) with a capacity of 980 L.Container made of high-quality polyethylene with an integrated baffle.Optimal shape with integrated stacking pocket and crane eyes for easy transport and loading.Hinged lid protects the pump and hose.Premium version complete with 8 m discharge hose on an integrated hose reel, flow meter, water separator, and automatic nozzle.230 V pump with a flow rate of 72 L/min. Delivered fully assembled.Dimensions: 127 x 107 x 112 cm,Weight: 130 kg.
omplete filling station for diesel with a capacity of 3500 liters. The system has a general building authority approval Z-40.21-565 and an integrated drip tray.The system is delivered fully assembled including filling connection with TW coupling with limit value transmitter, 230 volt electric pump, 72 l/min self-priming, automatic nozzle, hinged lid and 4 m discharge hose.4m discharge hose. Dimensions: 210x198x158cm WxDxH, net weight approx. 205kgTranslated with DeepL.com (free version)
Komplete yard filling station for diesel with 3500L capacity. The system is fully assembled and has an integrated drip tray as well as building authority approval Z-40.21-565.Filling station in premium equipment with self-priming 230Volt pump with 72L/min capacity, liter meter K33, diesel filter with water separator, integrated hose reel with 8m hose,automatic nozzle and a hinged lid for outdoor use. Dimensions: 210x198x158cm WxDxH. Weight: approx. 230 kg.
The 5000L tank has an integrated drip tray and leak and fill level indicator. Easy filling is possible thanks to the standard equipment with TW coupling and limit value sensor. Complete with 230V 72L/min electric pump, 4m DN25 filling hose, automatic nozzle and hinged lid for outdoor installation. The tank (Made in Germany) is supplied with a test certificate (Z-40.21-565) and must be registered with the relevant authority. In Switzerland:Please clarify in advance with your competent authority (e.g.: municipality) whether this tank fulfills the individual requirements for operation.A general approval for Switzerland is not given !!!!!In Switzerland:Please clarify in advance with your competent authority (e.g.: municipality) whether this tank fulfills the individual requirements for operation.A general approval for Switzerland is not given !!!!!
The perfect complete solution for businesses with larger fuel requirements. Thanks to the innovative design as a complete solution, there is almost no effort for installation or assembly. The tank has a capacity of 5,000 liters and is equipped with an integrated collecting tray. An optical leak indicator, a fill level indicator and a filling connection with TW coupling and limit indicator are standard. The self-priming 230V electric pump with a delivery rate of 70 L/min has a filter including a water separator for optimal safety in your vehicles. The standard hose reel with 8m hose and the automatic fuel nozzle ensure easy refueling of all types of vehicles. The tank has a hinged lid with gas struts for easy operation and optimal protection of the components in all weather conditions. The tank (Made in Germany) is delivered with a test certificate (Z-40.21-565) and must be reported to the responsible authority. External dimensions: W 240 x D 230 x H 185 cm
Innovative yard filling station with 2500 liter capacity. Complete system with integrated drip tray, leak indicator, filling connection with TW coupling, venting cap, level indicator, withdrawal line and high-quality 230V electric pump with 72 l/min and 4 m discharge hose with automatic nozzle. The system is fully assembled and is supplied with all the documents required for problem-free approval (subject to registration). In Switzerland:Please clarify in advance with your responsible authority (e.g.: municipality) whether this tank fulfills the individual requirements for operation.A general approval for Switzerland is not given !!!!!Without hinged lid! Dimensions WxDxH: 120x180x174 cm, weight 220 kg.
DT-Mobil Easy consisting of a single-walled PE tank, capacity 210L, approved according to ADR 1.1.3.1C. With 40L/min 12v professional electric pump and folding cover.
Mobile standard diesel tank system without lid according to ADR 1.1.3.1C with 210 l capacity and self-priming 12 V pump with max. 30 l/min output.Complete with 4 m discharge hose and automatic nozzle. CENTRI pump with approx. 30 L/min delivery rate and 4 m connection line incl. crocodile clips.Ideal for refueling on site. Dimensions: LXBXH 78.5x59.5x68.5 cm. Weight approx. 19 kg.
Mobile tank system according to ADR 1.1.3.1.C with 210 L content. Complete with pump CENTRI 12V/30 L/min, 4m outlet hose, automatic nozzle and lid.