With check valve and emergency drain screw. Can be used as an electromagnetic stopcock, as an opener or closer for simple hydraulic controls. Duty cycle 100%.
With check valve and emergency drain screw. Can be used as an electromagnetic stopcock, as an opener or closer for simple hydraulic controls. Duty cycle 100%.
portion that is resilient can be extracted from a pipeline with a large flow rate. For example, to supply two separate hydraulic circuits using a large hydraulic pump. Port P has priority. Connections: E=pump, P=adjustable preferred current, B=remaining quantity, QE=max. Input quantity, QP= max. regulated output quantity at connection P.Max pressure 210 bar.
The pressure-compensated 3-way throttle valve allows a constant fluid flow to be set at port P regardless of pressure fluctuations. The excess flow is directed to port B, which can be used as a second service port or return port to a vessel.If port B is used as a second service port, the pressure must not exceed the pressure at port P.Rated size 6 max. Flow 60 L/min, controlled quantity up to max. 30L/minmax. Pressure 315 bar3-way pressure compensatorControl element: rotary knobConnection thread: G1/2"Connection explanation: E = input, P = regulated quantity, B = residual flow ~< br>
for suction filters and return filters for pipe installation. Suitable for items 2 and 3. Connection thread R1/8"~ rear.
Used to connect hydraulic pumps with a 1:8 tapered shaft and electric motors. The conical bore depends on the size BG1, BG2 or BG3 of the hydraulic pump. Material: AluminiumThe largest diameter of the cone is on the side of the hydraulic pump: Size 1 9.7 mm Size 2 17.2 mm Size 3 22.2 mm
Ventilation filter and filler sieve
Standard filtration 25 micron, with by-pass valve, 1.7 bar
Standard filtration 10 micron, with by-pass valve, 1.7 bar
These valves allow an adjustable flow from the consumer to the return. If the flow rate determined by the setting is exceeded, for example in the event of a pipe burst, the valve closes immediately. The movable baffle plate is pressed onto the valve body against the built-in spring due to the increased flow forces. The valves should be installed on the consumer as soon as possible to ensure maximum safety.
The oil level indicators or level indicators made of plastic are suitable for checking the oil level in tanks and hydraulic systems. A metal housing protects the indicators against external mechanical stress.The polyamide material used has high mechanical strength and resistance to oil, lubricants, solvents, gasoline and most chemicals.The maximum operating temperature is 100C.
The oil level indicators or level indicators made of plastic are suitable for checking the oil level in tanks and hydraulic systems. A metal housing protects the indicators against external mechanical stress.The polyamide material used has high mechanical strength and resistance to oil, lubricants, solvents, gasoline and most chemicals.The maximum operating temperature is 100C.
The plastic oil level indicators or level indicators are suitable for checking the oil level in tanks and hydraulic systems.The polyamide material used has high mechanical strength and resistance to oil, lubricants, solvents, gasoline and most chemicals.The maximum operating temperature is 100C.
Complete with return filter, filler neck with pressure relief valve 0.35 bar, oil level indicator with temperature display and suction connection with shut-off valve. A 1/4? internal thread is provided for the ventilation in order to screw in a ventilation filter, e.g. Faie No. 12833, or to be able to attach a ventilation line. The inside of the tank is blank (not painted).Filter connection: G1" IT
The oil tank is supplied complete with a lid and lid seal. A drain with a 1/2" BSP internal thread is fitted on the side to allow the tank to be completely emptied.The steel tank is primed with anti-rust paint.
This valve is suitable for overpressure protection in hydraulic systems. The pressure relief valve is a directly controlled valve with a cone seat.
This valve is suitable for overpressure protection in hydraulic systems. The pressure relief valve is a directly controlled valve with a cone seat. This version is equipped with a 1/4" pressure gauge connection.
Used to attach the hydraulic pumps to the electric motor. Material: aluminum
Standard filtration 25 micron, with by-pass valve, 1.7 bar
Standard filtration 10 micron, with by-pass valve, 1.7 bar
Rubber cross for the flexible claw couplings from OMT
Standard filtration 90 micron.