​Two-stage threadClamping screwFor metal drums with G 2'' internal threadTechnical data:Connection thread: G 2” and M 64x4 aWidth across flats (SW): 50 mmMaterial: Steel housingDimensions LxWxH: 80 x 65 x 37 mmWeight: 0.16 kg

​Suitable for increasing capacity with a 1000 l tank Faie no. 38640 or as a complete solution from tank to pump.The outlet is 1“ male - suitable for all diesel pumps with 1” female thread.Adapter, G 1“ a, G 1” a (85 358) with O-ring (89 111) and 3-way ball valve, R 1” a (18 095 393), supplied pre-assembledPress fitting (23 218)Suction hose, 1.6 m, DN 25, G 1“ a, G 1” i (23 156)Suction pipe, G 1“ i, G 2” a (23 177 951)

L content, 400 mm . Ideal for changing oil and cleaning spare parts. With hump to support small parts. Beak for easy removal Made of polyethylene - therefore oil and acid resistant.

Practical adapter suitable for the Pressol cordless grease gun for alternative use of 500g screw cartridges on the grease gun. Made of aluminum, outside 67mm, length 49 mm

Proven and inexpensive hand lever pump for pumping diesel, heating oil, petroleum and oils up to SAE50. 2" connection - suitable for 60/200/220L barrels and tanks such as FA38640 and FA97559. Immersion depth up to 150cm. Delivery rate at 60 strokes/min: approx. 7l/min

​Practical hand pump for pumping fuels such as petrol, diesel, heating oil, kerosene as well as radiator protection and windshield washer fluid. Delivery line approx. 0.4 L/stroke, G2” barrel screw connection and M 64x4a suitable for standard 60/200/220L barrels. Complete with discharge elbow, barrel screw connection and telescopic suction pipe incl. suction strainer adjustable from 355-955mm.

Tried and tested, inexpensive hand pump for pumping diesel and heating oil, but also suitable for engine, gear and cutting oil. Connection 2? (200 L barrels). Diving depth 120 cm, including PVC outlet hose (1 m) and outlet piece. Output approx. 12 L/min.

High-quality, newly developed grease gun for the safe and comfortable delivery of all commercially available greases. . Long delivery hose (1m) ideal for use even when space is limited.Continuous grease delivery perfect even for large lubrication points. Suitable for 400g cartridges or loose fat. Max. pressure: 680 bar, flow rate: approx. 150 g/min, weight: 3.56 kg. Complete with charger (1 hour), 2 batteries 20V/2.0Ah, hose, pipe, mouthpiece and transport case. 2 adjustable grease delivery speeds.Delivery volume/battery capacity: approx. 25 cartridges 400g without counter pressure, approx. 7 cartridges with 100g counter pressure.With LED light on the grease gun head, soft grip, as well as stand and hose holder.

​Hose set with 1.5 m length DN19 electrically conductive hose suitable for petrol, incl. steel outlet elbow, 90° connection bend and 500 mm earthing cable with crocodile clip for petrol drum pump.

With vent valve and filling nipple for grease filling device. Pressure ratio 1:50 - recommended working pressure 6 bar. Capacity 500 cc, for filling with cartridges, loose fat and through filling devices. Complete with nozzle pipe and Hy mouthpiece.

High quality crank pump developed and manufactured by Pressol. Smooth turning operation thanks to high-quality components and an optimal gear ratio. Delivery line at 60 revolutions approx. 18L/min (diesel). Suitable for self-lubricating, non-aggressive media such as heating oil, diesel, petroleum and oils up to SAE90. The telescopic suction tube (355 - 955mm) makes it ideal for use with 60/200 and 220L barrels. Complete with outlet elbow and barrel screw connection G 2?.

Professional hand pump with approx. 22 L/min (0.18 L/revolution) delivery rate. Suitable for all standard 60/200/220 L barrels with G2 thread.Suitable for low-viscosity substances such as water, window clear or AdBlue.

Professional hand pump with approx. 22 L/min (0.18 L/revolution) delivery rate. Suitable for all standard 60/200/220 L barrels with G2 thread.Suitable for cleaning agents, window clears and organic acids and alcohols as well as inorganic chemicals.

Made of plastic.

Made of strong PVC with curved spout, 160 mm .

Strong PVC, with brass sieve, 160 mm.

For clean and efficient work. Ideal for agriculture, as well as for rolling and plain bearing lubrication under high loads. Oxidation-resistant, water-resistant, good anti-corrosion properties.

For filling lever, one-hand and compressed air grease guns. In order to be able to fill grease guns of brands other than Pressol, a filling nipple M10x1 is included for retrofitting. The dust cover can be pushed up the suction tube to check the remaining contents of the bucket at any time. No unwanted grease leakage due to the shut-off valve on the filling coupling.

Made of PVC, suitable for the easyFill grease gun.

Suitable for 400 g grease cartridges or loose grease using a spatula. Non-slip handle, low effort required when lubricating thanks to optimal lever ratios. Delivered without mouthpiece and hose.

​Special mouthpiece for all DIN grease nipples with lever-operated claw lock - therefore secure hold and no leaching grease. Extra-long XL version with 88 mm length and only 15 mm diameter - for optimum working for optimum working and easy unlocking in hard-to-reach places, e.g. on construction machinery or for use in agriculture.

The new easyFILL 400 does not require any spring mechanism. Simply insert the cartridge (400g), insert the grease follower piston and get started.Due to the vacuum in the grease gun head, the piston moves upwards all by itself and as if lubricated. Thanks to the variable stroke principle, the grease gun can be operated very easily, even with minimal lever movement.Delivery pressure 400 bar, scope of delivery: press, 10 pcs. PVC follower pistons.Handy, powerful grease gun, suitable for all commercially available 400g cartridges according to DIN 1284. With innovative grease follower piston system, ready for use quickly and easily.With variable stroke, so grease can be conveyed with minimal lever movements.An ergonomic, non-slip handle for optimal power transmission and handling, as well The grease gun head made of die-cast zinc makes this compact grease gun the ideal helper - even in rough conditions!Quick venting quickly and easily by half a turn of the grease gun tube.If there is greater counter pressure (e.g. resinous lubrication point), the short stroke allows the lubrication point to be removed can be overcome with significantly lower pressure.Due to the fact that it can be easily dismantled, the device can be easily cleaned. The scope of delivery includes 10 grease follower pistons, delivery without nozzle and hose.Technical data:Connection: M10x1Fill volume: 400cmGrease piston : 9mmDelivery pressure: up to 400barBurst pressure: 900barDimensions: 330x140x66mm

​Pressol one-hand grease gun with bleed valve. Solid zinc die-cast head with adjustable one-handed handle - for high volume or high pressure in difficult applications. The press is designed for use with400g grease cartridges, loose grease or for filling with a grease filling device. Complete set incl. armored hose 300mm and precision injector nozzle.

Incl. armored hose and round head nozzle. Filling options: 400 g cartridges or loose grease using a spatula, removable and movable push rod system. High accuracy of fit between cylinder and piston, which prevents dummy lubrication.